What spacer sizes? Konigsports, F1's, R888's Please help

[FatRS]

So today I wanted to finally try my track wheels in readiness of Spa in April...

The car is pretty low and when I tried them on today for the first time I can't get the wheel on full lock and it feels to the touch there's very little distance between the tyre and shock.

What spacers do I need for my set up of FK Konigsports, 15" OZ F1's and R888's. I'm not sure what camber etc its using as I asked K-Tec and they did it, but its not major due to mainly used for the daily commute.

The last picture shows with my daily wheels, Cup Turinis. What might be suitable for both?
Any help would be massively appreciated.

 

[MG cup]

Only you can tell really as the cars in front of you and you can see clearances needed etc.

Although I have fitted 20mm to the front of my 172 cup and get slight scrubbing on the bumper bracket on full lock and pushing on (that's with Eibach sportlines too) You will be able to get away with 20mm for front due to the narrower wheelbase of yours and 15-16mm rear most likely, what offset are your daily wheels 'cup' 'trophy'???

 

[danh90]

I run same suspension and wheels as you on track and have 25s front 15s rear had no problems to date

 

[MG cup]

Wasn't far off was I for a bit of guessing and working it off wheel offsets

 

[FatRS]

I run same suspension and wheels as you on track and have 25s front 15s rear had no problems to date

That's exactly the info I was hoping for. From someone using the same set up. However on the 16" Turinis there's no way I'll fit spacers on the rear and the gap at the front is more minimal. So will I need 25mm at the front for track and 15mm for front for road use with the Turini's? ( So in theory swap the 15mm from the front whilst changing to the track wheels and transfer to the back and use the 25mm on the front.)