Wheel spacers on a ph1 ?

[Hj172sport]

Hey there I'm new here sorry if this has been asked many of times I have used the search button but still not found any answers

I have a clio sport ph1 172 and I'm looking at putting on wheel spacers to give it more of a better stance

am am I right in saying that I need 16mm spacers on the rear and 20mm on the fronts ? Would it cause me many issues?

many thanks

 

[Mar172]

I would go 20mm front & 5mm rear

 

[Mr R.]

10 mm rear is also fine.

 

[Timmsy]

Ive just put some 25mm on the front and looks spot on! 20mm would be minimum i would think. 10mm rear is fine like Scott says, you could probably get 15mm depending on tyre profile and if you wanted to add some camber too.

 

[JAMason]

Sorry to jump on the back of this. Where do people get them from? I would like to invest in some when I come to replace my dampers and I have no idea where the best deal would be to get them from.

Jack

 

[Jekyll]

Get the front spacers from larkspeed. 20mm bolt to hub type (using existing wheel bolts) for the front.

Get 10mm rear hub spacers. Perfect for a Ph1 IMO.

 

[Mr R.]

Get the front spacers from larkspeed. 20mm bolt to hub type (using existing wheel bolts) for the front.

Get 10mm rear hub spacers. Perfect for a Ph1 IMO.

Or buy them direct for Euro car parts (the H&R fronts)

 

[Jekyll]

Or buy them direct for Euro car parts (the H&R fronts)

Thats it! I couldn't remember where the other place was

 

[Hj172sport]

Nice 1 thanks for all the advice Im gonna get 25mm for the fronts and think 10mm for the rears ?

timmsy u got any pics of yours please ?

 

[Dan]

Is a 10mm spacer kit with bolts etc you buy for the rears?

 

[Hj172sport]

I've ordered 20mm for the fronts and 16mm spacers for the rears there both kits with the bolts

 

[Timmsy]

Nice 1 thanks for all the advice Im gonna get 25mm for the fronts and think 10mm for the rears ?

timmsy u got any pics of yours please ?

sorry only just sen this, will grab some when home if you still want them?

 

[barnesautos]

Dr Jekyll and Timmsy Are you both running 10mm at the rear ? pics of this with F1's would be good

 

[Mr R.]

I am too.

 

[Timmsy]

@Dr Jekyll and @Timmsy Are you both running 10mm at the rear ? pics of this with F1's would be good

Not running any at the rear as yet buddy, planning on putting 10mm on the rear though.

 

[barnesautos]

Not running any at the rear as yet buddy, planning on putting 10mm on the rear though.

I'm looking to purchase some soon .

 

[Timmsy]

I'm looking to purchase some soon .

I hear Bobby. has some going possibly, although they are the camber type

 

[Mr R.]

I hear Bobby. has some going possibly, although they are the camber type

I took mine off and sold them.
To much - camber, made the car look broken.


Now running 10 mm no camber.

 

[KitsonRis]

I've got a set of 15mm spacers I am going to put on the back of mine, need to get the bolts for it. But these go behind the hub - I think that's what my brother says, he knows and is helping me fit them!!

Not sure what to do with the fronts though...

 

[Jekyll]

I've got 10mm rear hub spacers. Will get a pic in a mo.

 

[deadmau5]

What size hub spacer can you get away with on the rear without needing bigger bolts? I've got some 10mm without camber to go on.

 

[barnesautos]

I've got 10mm rear hub spacers. Will get a pic in a mo.

Cheers

 

[Mr R.]

10 mm with standard bolts is fine.

 

[Jekyll]

 

[barnesautos]

Am I right in saying your 10mm blocks are fitted between the Hub and the beam axle - hence you can use standard wheel bolts ?

 

[Mr R.]

Yep that's correct.

 

[Jekyll]

It looks like I run camber on that pic, but I don't.

You can also see the front wheel spacers at that angle which are spot on IMO. Spaced out but just a little tuck into the front arch is just right. In line with the arch looks too much unless you run camber.

 

[Hj172sport]

Drjekyll that pic looks ace what spacer you running ? I've ordered my set just waiting for mr posited to deliver mine I've gone for 20mm for the fronts and 16mm for the rears !

 

[Jekyll]

20mm bolt to hub type front spacers and 10mm rear hub spacers. It's also on BC Coilovers.

 

[Hj172sport]

Guess what came today just got to get them fitted now !!

 

[deadmau5]

Does anyone know what the four bolts are called that hold the rear hubs on? I went to install my spacers yesterday but the smaller star headed bolt was rounding off so I gave up.

 

[Mr R.]

Renault don't sell them anymore, however I bought some from eBay.

I'm sure they are 75mm long, the small one is M8 the other 3 are M10 countersunk.

 

[deadmau5]

Nice one, cheers.

 

[STEVE.M]

Get the front spacers from larkspeed. 20mm bolt to hub type (using existing wheel bolts) for the front.

Get 10mm rear hub spacers. Perfect for a Ph1 IMO.

Hello,just to confirm,when you say use rear 10mm spacers,you do mean per side.?Kam Racing also sell the Eibach spacers at competitive prices,but list 2x10mm spacers as a 20mm kit.I wouldn`t want folks to buy the wrong kit in error.

 

[Jekyll]

Yep, 20mm per side on the fronts = 40mm total.
10mm per side on the rears = 20mm total.

 

[Mr R.]

Hello,just to confirm,when you say use rear 10mm spacers,you do mean per side.?Kam Racing also sell the Eibach spacers at competitive prices,but list 2x10mm spacers as a 20mm kit.I wouldn`t want folks to buy the wrong kit in error.

Im sure they are not that stupid, spacers come in a pair.

 

[STEVE.M]

Im sure they are not that stupid, spacers come in a pair.[/QUO

So do brake discs,but Europarts price them as singles!!!