Which induction kit?

[markblack172]

You've probably done loads of these threads
but just wondered which you'd recomend?

its for a ph1 172

pics and rough prices if possible

thanks

 

[MillerLight]

igt moxogon for £££
BMC CDA for less £££
IGT pannel filter for about £46

cant recall the prices for the other two

 

[guysy]

Lots of thread on this mate, Not having a go.. Doing a search you will probably find more.

BMC CDA seems a good choice, But is a fair bit of money.

 

[Craig]

bmc ive got one on the 182 sounds very good

 

[MillerLight]

as said The Moxogon is regarded on here to be the best enclosed induction kit (open ones are a waste of time unless you want the sound and don’t mind losing power)

The BMC is imo the best IK for the price

And many condider a aftermarket panel filter better than any I.K

 

[Christophe]

I have a BMC which isnt to pricey, sounds the nuts and doesnt lose performance (wont gain any though)

 

[franx]

Get some larger cafs up to the filterhouse you have, and stich a ITG in there.

I've changed my 172 phase 2 box to the phase 1 you have and it's the best setup sofar and i've tried some setups..

 

[clio_luke]

why do you want one? for sound?

the standard ph1 172 airbox is very good

 

[markblack172]

why do you want one? for sound?

the standard ph1 172 airbox is very good

i brought the car with an induction kit and its foooooked
just wondered which one would be good to replace it

 

[172Ben]

whats on it at the minute?

 

[markblack172]

whats on it at the minute?

just a k&n

 

[beechey]

igt panel where to get one??

 

[MillerLight]

igt panel where to get one??

ktec iirc

 

[MillerLight]

whats on it at the minute?

just a k&n

do you have the original airbox etc?if you do a igt pannel would be best, if not id get a BMC CDA

 

[Spongebob 172]

as said The Moxogon is regarded on here to be the best enclosed induction kit (open ones are a waste of time unless you want the sound and don’t mind losing power)

The BMC is imo the best IK for the price

And many condider a aftermarket panel filter better than any I.K

i have to disagree with you on the open filter being a waste of time...i have a piper x open cone on mine and got 177.2 at a recent rr day with other clio guys..that was with a remap and scorpion exhaust...so in some cases they do work..how i dont know as i get alot of heat soak on mine,but my little 172 loves it

 

[whatisjustis]

I'd suggest the Simota Aeroform - but then I am biased Seriously though, I've not noticed any loss of power, just gained a huge grin from the noise it makes!

 

[Spongebob 172]

I'd suggest the Simota Aeroform - but then I am biased Seriously though, I've not noticed any loss of power, just gained a huge grin from the noise it makes!

i was told by a few members not to get one as the air feed sits behind the rad and you get serious heatsoak from it

 

[CHRISK172+]

http://www.hillpower.co.uk/

works....sounds good and look good too......

 

[demps23]

^^^^ second that! pleased with mine

 

[whatisjustis]

I'd suggest the Simota Aeroform - but then I am biased Seriously though, I've not noticed any loss of power, just gained a huge grin from the noise it makes!

i was told by a few members not to get one as the air feed sits behind the rad and you get serious heatsoak from it

It doesn't sit THAT close to it. A shorter elbow and a spot of CAFing and its na bother

 

[Kam.]

open ones are a waste of time unless you want the sound and don’t mind losing power

They only loose power if positioned badly. If done correctly they can increase the performance over off the shelf enclosed kits as you can see below (standard is 125hp)...

BMC CDA Lupo GTi

Open Induction Kit Prototype Lupo GTi

We'll be making an induction for the Clio 1*2 later in the year when we get our next demo car

 

[Fletcher]

itg maxogen.

 

[mbk-172]

Since putting a bmc on my clio it seems to have lost the responsiveness i had previously, although that might be to do with my lack of cold air feeds. Wicked noise though.

Does having a caf straight into the filter make a difference?