Which seats on Clio 182 OEM sliders?

[LOK]

Hi guys - I am thinking about putting some reclining sports seats into my 182, was thinking about Sparco R100 or OMP Strada. The point is - I would like to keep the OEM sliders, especially on the driver side since you can raise the seat for smaller drivers. Has anyone on here put aftermarket seats onto the original sliders?
Many thanks!

 

[LeeRS]

I think the only way you can do it is to modify the originals.
Im yet to meet anyone small enough to have the seat setting to high though
Mine is all the way down and still feels high.

 

[JON FOZ]

You can mount a wide range of seats onto my VBD Recaro adaptors.

These bolt straight to your existing sliders and allow aftermarket seats to be used.

Jon

 

[motocycler]

You can mount a wide range of seats onto my VBD Recaro adaptors.

These bolt straight to your existing sliders and allow aftermarket seats to be used.

Jon

Hello Jon,

could you give me more information as i would use RECARO CS in my V6

Regards

 

[leeds2592]

Forgive me if I'm wrong but the height adjustment is on the seats not the sliders so even if you had the oem sliders with say Trendlines you wouldn't be able to adjust them up and down.

 

[JON FOZ]

Hello Jon,

could you give me more information as i would use RECARO CS in my V6

Regards

Hi,which CS seats are you wanting to fit ?

Renault supplied from 197 etc or Ones supplied as aftermarket items ?

Jon

 

[motocycler]

Hello Jon,

thank you for your reply.
I want to install recaro CS and have to decide which type i should buy. I think the following options are available:
Clio3 RS Recaro CS
Megane RS Recaro CS
original Recaro CS with standard fitting without side airbag.
I do not know the differences ! For what type of seat are your VBD Recaro adaptors. How can I change the seat height. Some Photos or Instructions would be helpful.

Ferdinand.Taubner@gmail.com

 

[JON FOZ]

As far as I know the only ones that my VBD Lowered Recaro adaptors fit are the standard CS without airbag

There isn't a way of altering the height.

You can use either my standard height or my lowered version

Cheers

 

[motocycler]

Hello Jon,

i have the possibility to buy an Recaro CS Renault Clio Driver seat new for 850€. But this is with airbag ! Would this fit on your adapters. What ist the difference in height of your 2 Versions.

Regards

 

[JON FOZ]

That seat will NOT fit.

They have all the Renault specific base on them which makes them sit super high.

My adaptors can only be used with the aftermarket Ines.

My lowered adaptors are 30mm lower than my standard.

Cheers

 

[motocycler]

Hello Jon,
thank you for your reply. I have to use original Recaros !!! I think the normal height is as series in the lowest position ? So I have to decide which height to use. The safety belt buckle remains on the original runner ? How much are your adapters inc. P&P to Germany ? Could you send a picture of your adapters ? Did your Adapter also fit other makes e.g. Sparco ?
I would like to apologize for the many questions. But I would like to carry out the conversion without major problems next May.

Cheers

 

[JON FOZ]

The safety buckle will now bolt to my adaptors.

To this part ;

%5BURL=http://smg.photobucket.com/user/jon...87F5-A71079E40218_zpsfeydqdws.jpg[/IMG][/URL]

My lowered Recaro adaptors are £250 plus post

I've just ran a quote with Parcelforce which came out at £56.

The Recaro adaptors will not fit Soarce as they are Recaro specific.

Cheers.Jon

 

[motocycler]

Hello Jon,
the Link for the Pictures does not exist.

Cheers

"Sorry, the requested page does not exist.
Please check the URL for correct spelling and capitalization"

 

[JON FOZ]

%5BURL=http://smg.photobucket.com/user/jon...87F5-A71079E40218_zpsfeydqdws.jpg[/IMG][/URL]

 

[JON FOZ]

http://smg.photobucket.com/user/jonfoz/media/Recaro Clio subframes/B781BCCC-0122-4E6B-87F5-A71079E40218_zpsfeydqdws.jpg.html]

[/URL]

 

[JON FOZ]

Photobucket is playing up with the links

Hope this works

 

[motocycler]

Hello Jon,
with this picture I have no idea how it is mounted or how it looks. I will get 2 Recaro CS and then report back. The quality of the work seems to be very good!
Can I increase the seat height with distances again when it is too low ?
best regards

 

[JON FOZ]

http://smg.photobucket.com/user/jon...8-4B53-AC6E-6E5FCF55954B_zpsq7biaam5.jpg.html

 

[JON FOZ]

Check out my thread in Group Buy section which is in Parts for Sale on this forum.

http://www.cliosport.net/threads/vbd-lowered-recaro-seat-adaptors.789476/

 

[motocycler]

Hello Jon,

i m not a member !

Regards

 

[JON FOZ]

Ok

 

[motocycler]

Hello Jon,

i have ordered 2 new Sportster CS with no airbag so I am in need of lowered Recaro Adapters for my V6. Please send me Pictures and other useful info to my gmail account Ferdinand.Taubner@gmail.com. Then we can also clarify the payment and shipping.

Best Regards

 

[JON FOZ]

Hello Jon,

i have ordered 2 new Sportster CS with no airbag so I am in need of lowered Recaro Adapters for my V6. Please send me Pictures and other useful info to my gmail account Ferdinand.Taubner@gmail.com. Then we can also clarify the payment and shipping.

Best Regards

I've emailed you

Jon