ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Which silicone hose clamps?

iv used all stainless steel mikailor clamps as they look alot better. Iv done a fitting guide and list of clamp sizes needed too if any help to you
 
Looking to fit some silicone hoses myself, @M.C.. did I read that you had some issues with the mikalor?

What did you go for in the end?
 
Use normal ones. I put the mikalor clamps on and I’m just about to swap them out.
Been recommended JCS Higrip. Just trying to work out the sizes I need now. Going off the sizes i've seen recommended by @RichValver they're the below:

Pack QTY: Pack of 4, Material Spec: W4 - Stainless Steel, Clip Size: 17-25mm (0X)
Pack QTY: Pack of 10, Material Spec: W4 - Stainless Steel, Clip Size: 25-35mm (1)
Pack QTY: Pack of 4, Material Spec: W4 - Stainless Steel, Clip Size: 35-50mm (2A)

But I will confirm.
 
Looking to fit some silicone hoses myself, @M.C.. did I read that you had some issues with the mikalor?

What did you go for in the end?

yes I used Mikalor on all hoses and did a trackday atAnglesey, one pipe started leaking when on track as they were not clamping the hose correctly messed my day up so changed all the clamps when I got back to normal jubilee clips.
 

These. Used them on my Clio years ago.

We used them down Portsmouth Dockyard to secure ducking round a pontoon that spends half its time under water and they are still perfect.
Not wanting anything that will dig into the pipes over time. That's why the JCS HI-GRIP are perfect as they're stamped and have a smooth inner edge.

So I received my Silicone hoses and measured them all. The dimensions are as below:

18.4
18.5
18.7
20
24.3
24.7
25.65
25.7
26.2
26.63
32.5
33.75
38.3
39.74
39.84
41.37

Give or take, as they're obviously flexible.

So the below should be fine, with extras to err on the side of caution.

Pack QTY: Pack of 6, Material Spec: W4 - Stainless Steel, Clip Size: 17-25mm (0X)
Pack QTY: Pack of 10, Material Spec: W4 - Stainless Steel, Clip Size: 25-35mm (1)
Pack QTY: Pack of 6, Material Spec: W4 - Stainless Steel, Clip Size: 35-45mm
 
Last edited:
Not wanting anything that will dig into the pipes over time. That's why the JCS HI-GRIP are perfect as they're stamped and have a smooth inner edge.

So I received my Silicone hoses and measured them all. The dimensions are as below:

18.4
18.5
18.7
20
24.3
24.7
25.65
25.7
26.2
26.63
32.5
33.75
38.3
39.74
39.84
41.37

Give or take, as they're obviously flexible.

So the below should be fine, with extras to err on the side of caution.

Pack QTY: Pack of 6, Material Spec: W4 - Stainless Steel, Clip Size: 17-25mm (0X)
Pack QTY: Pack of 10, Material Spec: W4 - Stainless Steel, Clip Size: 25-35mm (1)
Pack QTY: Pack of 6, Material Spec: W4 - Stainless Steel, Clip Size: 35-45mm

Cheers for this, I want to replace all my OE clamps as they are past it!
 
Back
Top