Wilwood calipers fittment on 15'' wheels

[v16daf]

Hi,

I'm running the wilwood midlight calipers with 295 mm disks up front.

I know 15'' speedline 2118's fit

Would oz f1 15'' fit ok?

Will be using these as a track set only

Any help would be appreciated

Thanks

 

[v16daf]

Anyone?

 

[Fletcher]

Some size as my Compbrake 4 pots. I run these under 2118s without any problems.

 

[v16daf]

Some size as my Compbrake 4 pots. I run these under 2118s without any problems.

Thanks, have you any knowledge about oz f1's?

 

[v16daf]

Anyone else know if oz f1's fit ok?

 

[Sam@NP]

I think you will need spacers as the Oz has a big lip on the inside. Why you running Oz F1s on track? They bend.

 

[v16daf]

I think you will need spacers as the Oz has a big lip on the inside. Why you running Oz F1s on track? They bend.

Do they? I never knew this! Is it best to go for 2118's then I take it?

 

[Sam@NP]

2118s heavy but strong.

 

[v16daf]

2118s heavy but strong.

Any other recommendations?

 

[oliver.james]

Any other recommendations?

OZ Ultras?

 

[v16daf]

Think I'm gonna go for the common 2118's in white. What's the offset I would need? ET38 I take it

 

[oliver.james]

Mine are ET43 (purely because the anthracite were only available in this offset) and fit with the midilite calipers without any problem.

I think the white 2118's are available in the lower 37/38 offset too though.

 

[v16daf]

Mine are ET43 (purely because the anthracite were only available in this offset) and fit with the midilite calipers without any problem.

I think the white 2118's are available in the lower 37/38 offset too though.

What does the offset mean, or do?

 

[oliver.james]

The lower the offset, the further out the wheel will sit.

The ET38's will sit further out than the ET43's.

 

[v16daf]

The lower the offset, the further out the wheel will sit.

The ET38's will sit further out than the ET43's.

Right, so basically the ET38's would run a little wider than ET43's? And also have more clearance for the wilwood calipers?

 

[oliver.james]

Spot on, mate.

the ET38's would be better for the Cup; near enough the same as the standard offset.

 

[v16daf]

Spot on, mate.

the ET38's would be better for the Cup; near enough the same as the standard offset.

Cheers mate

 

[v16daf]

ET43's in white ordered today, should be with me tomorrow. Excellent service off speedline!!!

 

[Fletcher]

^^^^yeah speedline are very quick with delivery!

That reminds me, I need another set of 2118s.

 

[Silent_Scone]

I think you will need spacers as the Oz has a big lip on the inside. Why you running Oz F1s on track? They bend.

You don't need spacers no

They're still made of cheese shite wheels though

 

[v16daf]

Nearly bought a set of OZ f1's on ebay last night but decided to go for something a little tougher

 

[Shahab]

I just got some team dynamics prorace 1.2 15"s for track use, are they also made of cheese or will they be up to the challenge?

 

[v16daf]

I've heard there ok, but not an expert

 

[v16daf]

 

[mikekean]

ET43's in white ordered today, should be with me tomorrow. Excellent service off speedline!!!

You must of got the last set, I tried to order 10 today in white and ended up having to buy them in anthracite instead. Gonna have to get my other sets sprayed to match now haha. And atleast the dust from my DS3000's wont show up as bad once it has eaten into the paint.

 

[v16daf]

You must of got the last set, I tried to order 10 today in white and ended up having to buy them in anthracite instead. Gonna have to get my other sets sprayed to match now haha. And atleast the dust from my DS3000's wont show up as bad once it has eaten into the paint.

Lol, I'm very impressed by his service to be honest. Mine are already wrapped in R888 they look minty mint

 

[JackJack]

I just got some team dynamics prorace 1.2 15"s for track use, are they also made of cheese or will they be up to the challenge?

Be fine they use them in the btcc.

 

[v16daf]

 

[Shahab]

Be fine they use them in the btcc.

cheers

 

[Fletcher]

Nice. Finally getting my 2118s wrapped in R888 tomorrow.