C
crofty66
I just had my ph1 172 rr'd. It has no engine mods apart from a k-tec de-cat and stealth 2 system. It just made 179.6bhp. Chuffed to bits, an awesome bit of kit.
Enough said.
Enough said.
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
C
crofty66
unfortunately not, the std backbox had a hole in it when i bought it so i just went straight for the stealth. It was done on dastek rollers at clive atthowes in norwich, they seem to have a very professional set up there. they said i was fairly lucky as most 172/182's dont make near to what they should do which was what i was honestly expecting to happen.
Timmay- when? where? i have been in afghan for 7 months.
Timmay- when? where? i have been in afghan for 7 months.
White Evo V
as 'the duck' said prepare to be grilled!! All rollers are different and most are in the customers favour - to make you happy!!
The only true way to see if you have gained from your mods is to dyno it before and after.
The only true way to see if you have gained from your mods is to dyno it before and after.
Poopensharten
ClioSport Club Member
Golf R
Well done mate, tidy result that.
As per if its below book your cars broke, if its above book the rollers are broken.
Just tell people you got 172.9 lol
As per if its below book your cars broke, if its above book the rollers are broken.
Just tell people you got 172.9 lol
182
172 5HED
corsa ecoflex
i had my ph1 rr'd at surrey rolling road and it gave out 177.2@fly and 148.7@wheels all i have is a remap.open cone filter and 2.5" scorpion from cat back...charlie at surrey said it was quick as the engine was nice and loose as it had done 105k
C
crofty66
Yea, im under no illusions that it would be set up to make me happy. It made 142 at the wheels. i was told that the wheel figure is ok but it can vary so much because of things like wheel size and condition of the transmission from one car to another. Im happy with it regardless. The car is looked after so i wasnt surprised. i got back from afghanistan and spent a small fortune on getting it up to scratch(service, new leads, new suspenion, new tyres, new brakes, new bearings and ball joints etc etc. since i have had it it has never had anything but v-power put in it and i give the fuel system a flush every few months. It gets a clean at least once a week and i de-grease the engine bay so i can keep a check for leaks etc. The place i had it rr'd is on the internet for those that are into checking stuff like that out.
BG FF182
Whats wrong with SCA?
I have heard some good things about Clive Atthowe, but have never really known where to head if I ever wanted anything doing to my 182.
It's always nice to realise that something is better than you expected!!
182, SQ7, Trafic
Can you not tell us where you had it RR'd?
SCA are a bit bodgy and dodgy from what I hear about people that had had work done there.
I went and had my geometry done there and they didn't seem to have much of a clue and I had to tell them what to do!
Clio 172 cup
If you got it RR at WELL LANE in Leeds you can knock 30bhp off to get the true figure!! :clown:
C
crofty66
djroberts- Clive attohowes in norwich, salhouse road. i put it earlier in the thread.
Yea its all standard apart from the exhaust. If you are local and wanna go there im off work for another 3 weeks and would be happy to meet. im in stalham just outside norwich but only 15 mins from gy. it was 140 but i had a diagnostic done as well as i was having problems with the ignition (split ht lead in the end). they did a full physical engine check and then plugged her in to check the ecu too. they definately know what they are on about.
Yea its all standard apart from the exhaust. If you are local and wanna go there im off work for another 3 weeks and would be happy to meet. im in stalham just outside norwich but only 15 mins from gy. it was 140 but i had a diagnostic done as well as i was having problems with the ignition (split ht lead in the end). they did a full physical engine check and then plugged her in to check the ecu too. they definately know what they are on about.
C
crofty66
oh yea. pics to follow soon
182
hi pal let me know you at the wheels figure and i'll give you the true flywheel hp 
B/G 182 + PH1 Track
:lolup: Ppl are only asking for the at the wheel figure so the can actually compare it to their own cars or other cars.
Having the title WOW also brings in the sharks and criticism.
C
crofty66
Ah well, wasn't trying to attract criticism, just thought people might be interested.
141.3bhp at the wheels @6398rpm, 179.6bhp at the flywheel @6435rpm, 154.6lbft @ 5433rpm. environment temp=13.6degrees. Not sure on just rr prices but look them up online and give them a call. they will be more than happy to help. off to get m alignment sorted tomorrow at autotest in norwich.
141.3bhp at the wheels @6398rpm, 179.6bhp at the flywheel @6435rpm, 154.6lbft @ 5433rpm. environment temp=13.6degrees. Not sure on just rr prices but look them up online and give them a call. they will be more than happy to help. off to get m alignment sorted tomorrow at autotest in norwich.
182
so around 165 to 170bhp at the fly then
understand your not trying to attract attention, but obviously those who dont know about rolling roads think they all the read the same hence all the "talk" starts. as has been said the only comparable figure is the at the wheels result which is far more accurate
trust me mate, 165 upwards is a strong result
understand your not trying to attract attention, but obviously those who dont know about rolling roads think they all the read the same hence all the "talk" starts. as has been said the only comparable figure is the at the wheels result which is far more accurate
trust me mate, 165 upwards is a strong result
Last edited:
182
worked it out > 171bhp nice
exactly chap, too many variables to compare different runs on different days
having said that, figures look good, and as long as your hapy fair play chap
C
crofty66
yep. happy now. had the wheels aligned today, now it handles too. should have had it done as soon as the coilovers were fitted really. would have saved me a few hundred quid on tyres.
C
crofty66
good goin that. i think inlets might b the next step for me. not sure what sort of gains i will expect though.
LY 200
Why is everybody on the chaps back and taking the piss!?
I dont think he was saying he believed the mods he has made a massive difference as he highlighted them as basically bare mods.
Just seems like somebody who was happy with a result his car got from an RR whether it be wrong or not!
I dont think he was saying he believed the mods he has made a massive difference as he highlighted them as basically bare mods.
Just seems like somebody who was happy with a result his car got from an RR whether it be wrong or not!
C
crofty66
lol, its all good. I can tell the piss takers and those who aren't. Im happy with it, end of really. Im not a mechanic but i know enough about engines etc. As before im aware not all rollers are the same. I posted the flywheel power as thats what the guys there told me was the one tolook for. When you buy as new car it is the flywheel figure you get not the wheels. As far as im concerned it's not a big deal. Maybe wow was a bad title, I would have been impressed if it was 10hp less. Lets face it, when do they ever ake book figures anyway?
Similar threads
