What have you done to your car today ???

[Yarp]

I fitted the SXE-1350s on the front, cool stuff! The tweeter units are however too small, I will be leaving the OEM ones for now.

I couldn’t get aftermarket ones to fit nicely on mine so just disconnected the originals and went with door speakers only. It was miles better without them.

 

[mumpy]

I couldn’t get aftermarket ones to fit nicely on mine so just disconnected the originals and went with door speakers only. It was miles better without them.

Sounds reasonable, so your new door speakers have tweeters integrated?

I also fitted the 1325s on the rear. Overall sounds a lot better but that’s only because the factory speakers were completely knackered. Surprised they lasted 23 years.

I am running all this with an Alpine head unit. Couldn’t live without BT.

I am also thinking about fitting a KTP-445A as an HU basic amp. Haven’t made up my mind yet.

 

[Yarp]

Sounds reasonable, so your new door speakers have tweeters integrated?

I also fitted the 1325s on the rear. Overall sounds a lot better but that’s only because the factory speakers were completely knackered. Surprised they lasted 23 years.

I am running all this with an Alpine head unit. Couldn’t live without BT.

I am also thinking about fitting a KTP-445A as an HU basic amp. Haven’t made up my mind yet.

Yeah, they have the tweeters built in. They are alpines of some flavour.

 

[mumpy]

Yeah, they have the tweeters built in. They are alpines of some flavour.

View attachment 1732831

Yeah I got those on the back, they are probably the 1325s

 

[Matt Cup]

Picked up a Genuine NOS windscreen for the Cup as mine is peppered to f**k with stone chips making it hard to see through along with some windscreen seals. Now to find someone local to remove and refit it.

 

[Louis]

Picked up a Genuine NOS windscreen for the Cup as mine is peppered to f**k with stone chips making it hard to see through along with some windscreen seals. Now to find someone local to remove and refit it.

 

[cupguy]

The 172 Cup passes another MOT. Offside sill scraped through, some welding to do this summer but another year on the road. HWFG.

 

[Little Newms]

Cage and Brace fitted today -
Was debating between Black and J45. Pleased I went with blue!

 

[cupguy]

Cage and Brace fitted today -
Was debating between Black and J45. Pleased I went with blue!

View attachment 1732989

View attachment 1732990

Looks tremendous!

 

[Pep]

Big day on the car today for me.
Diagnosed my broken fag lighter as a blown fuse and replaced. Then glued in the rear number plate screw fitting as it was loose.

 

[Matt Cup]

Took it out for a run and returned home for it to tick over to.

 

[Andy P]

Took the side skirt & drivers wing to check. Glad I did. Less than an hours work to get to this stage but well worth doing.

 

[Matt Cup]

Took the side skirt & drivers wing to check. Glad I did. Less than an hours work to get to this stage but well worth doing.

View attachment 1734025View attachment 1734026View attachment 1734027View attachment 1734028View attachment 1734029

Servo looks in a similar condition to how mine was.
This is the after.

I’ve added a smothering of black silicone over it as advised by @16v_paddy after this shot.

 

[neilj007]

First post on this forum.
Had the car in the family a few years - son had it and now I do. Needed a bit of work - had an oil leak from the gearbox, a bit tatty inside and out.
Found a local company to do the work - https://redlinesportscars.com/ (specialise in Marcos, but very good auto engineers). So, as the gearbox was coming out, fitted a LSD, new clutch plus lightweight flywheel. Fitted short shift kit, some new engine mounts, replaced all the important fluids, replaced the headlining and generally sorted a few bits out here and there and gave it a good spanner check
A really nice car now and booked in to my local track (Castle Combe) in July for a track day

 

[Matt Cup]

New OEM windscreen fitted. Will be able to finally see through the fucker properly.

 

[Mr Trailer Man]

New OEM windscreen fitted. Will be able to finally see through the fucker properly.
View attachment 1734753
View attachment 1734754

Did you remove the dash top or did they?

 

[Matt Cup]

Did you remove the dash top or did they?

I did to make it easier for them and so I could get to the popped clock bulbs.




Oh and so I could completely f**k up the de-stickying of the centre bit and buy another one to replace it.

Do you notice anything untoward?

 

[Mr Trailer Man]

I did to make it easier for them and so I could get to the popped clock bulbs.


Oh and so I could completely f**k up the de-stickying of the centre bit and buy another one to replace it.

Ahh yeah forgot you were de-stickying it.

Was going to say, i don't remember mine being removed when i had a screen replaced 😅

 

[PerthRS]

Oh and so I could completely f**k up the de-stickying of the centre bit and buy another one to replace it.

My car's centre panel in the dash was painted by the previous owner in an attempt to resolve the stickiness (along with the interior door handles). It's not a very good attempt at matching the colour.

Is the centre panel from the dash able to be removed/detached. Or is it completely moulded in?

 

[Gus]

I fitted the SXE-1350s on the front, cool stuff! The tweeter units are however too small, I will be leaving the OEM ones for now.

The way round it is to get a couple of old credit cards and cut a hole in the middle to fit the alpine tweeter. You can then cut the credit card outer edges to fit the hole on the Clio. You can then fit the Clio tweeter grille on top and you'll never see the credit card and it will all look OEM.

 

[MarcB]

Been up since 5am so decided to give the car a wee clean again

 

[Matt Cup]

My car's centre panel in the dash was painted by the previous owner in an attempt to resolve the stickiness (along with the interior door handles). It's not a very good attempt at matching the colour.

Is the centre panel from the dash able to be removed/detached. Or is it completely moulded in?

Plastic welded tabs hold it in annoyingly. Don’t know why they couldn’t make it clip in so you can get to the stuff easier.

 

[Matt Cup]

It does come out though by shaving these bits off.

 

[Matt Cup]

New dash fitted. Phew.

 

[ex-Chinese Dave]

I'll be taking the top off my dash in the next few months to fix the drivers air vent AND to find all those bits that rattle to death whilst on the move.

 

[Matt Cup]

Well you’ll be rest assured even with my limited skill it was a doddle 👍

 

[Clio_fool]

AND to find all those bits that rattle to death whilst on the move.

Totally not going to happen. Nvh was a design spec on the clio 😂.

 

[Matt Cup]

Totally not going to happen. Nvh was a design spec on the clio 😂.

I swear they just throw extra loose s**t behind there to drive us crazy. The whole car needs tipping upside down and shaking .

 

[Little Newms]

Harness fitted today

 

[d19wood]

Finally got round to putting new retaining clips on my rattling exhaust heat shielding and sorted my cruise control. Probably still won't ever use cruise control but it was annoying me that it didn't work 😎

 

[PerthRS]

It does come out though by shaving these bits off.

View attachment 1734885

View attachment 1734884

Great! Thanks for the detailed response

Looks like I should source a non RS centre dash top. I already have the non RS control panels below it.

 

[avstar1]

Fitted new radiator to cup number 2, as you can see well off its best, probably the original one it was a Valeo rad. Had the new radiator for a while and wanted to do the change out in better weather. No pics of it finished yet as I'm waiting on type D coolant and a thermostat to replace out. Here's confirmation that the Nissens 637931 is the correct one for the cup also.

 

[AshyC GT]

Not Clio related as that sold last month. It has meant I can't spend some on the Civic.
Before

After

Refurbished rocker cover and strut bar.
The purple items are being changed for blue.
New battery as well.

Few bits left to arrive but getting there

 

[Matt Cup]

Not Clio related as that sold last month. It has meant I can't spend some on the Civic.
Before

View attachment 1736228
After
View attachment 1736227

Refurbished rocker cover and strut bar.
The purple items are being changed for blue.
New battery as well.

Few bits left to arrive but getting there

More pics of this EK9 required!

 

[AshyC GT]

It's going in to the bodyshop next week for some work. Full underside refurb and underseal, including a new arch on the nearside rear due to the start of some tin worm.
Then a fresh spray of champ white down that side.

 

[Matt Cup]

Love it!

 

[Clio_fool]

Swept some more of it up.

 

[Stiamh-JM]

Swept some more of it up.
View attachment 1736234

Can't believe the M2 is rusting that much already

 

[cat171]

New OEM windscreen fitted. Will be able to finally see through the fucker properly.
View attachment 1734753
View attachment 1734754

Hi, who did it? Whereabouts are they? I want a new one for a FF Phase 2 172.

 

[vtec-e]

It's going in to the bodyshop next week for some work. Full underside refurb and underseal, including a new arch on the nearside rear due to the start of some tin worm.

My old Civic needed both arches welding up, the rest of it was fine. Had to get rid in the end, because of ULEZ, and now have the Clio as a run around.