Recent content by Benny06

Hi, My 182 is awaiting sale at the moment and will be on the drive until it sells. I plan to disconnect the battery and was wondering if there's anything else I can do to further immobilise it? Short of sticking it on stands and taking the front wheels off (which is probably the best option...

Thanks :clap:

Clio 182 FF Black Gold 55plate / 60k Turini's (requiring refurb) Braided Lines DS2500's all round V12's all with good tread (2 new 2000 miles ago) Miltek Cat Back Panel Filter Retrimmed Steering wheel by Aaron_182 OEM to Aux 3.5mm 'ClioSport' mats Good condition, 2 small door dings. MOT Sept 14...

Bit of a bump for this. Unfortunately this hasn't lasted. Admitedly I did make contact with a kerb in the snow and also get caught out by another in the dry with the window down (that noise :headno:). The rear right is flaking off the back of the wheel and bubbling slightly and the front two...

Cheers guys, Will stick with them until the rears need doing.

Hi Guys, I've got V12's on all 4 corners at the moment. Fresh on February last year and I've done around 15-16k since and the fronts aren't far off the markers with some of the outer edges looking a litte shagged. My MOT is due on Thursday and I figured with the impending autumnal rain...

Hi, Replaced my rear mounts today but my exhaust is still sat about 1" lower than it should be. (Miltek) Should I just buy the universal mount and fit it inside the brackets or is there an adjustment that can be made? Thanks, Ben

Thanks, Ideally I'm just looking for something I can apply to stop any corrosion if such a thing exists?

A while back a local garage did a bit of damage to one of my turini's that had been recently refurbed :mad: You can make out the damage here. Is it best to treat this with something? as it is effectively bare metal. Thanks, Ben

Called after my first year a few months ago and got £7 off my £35 bill for six months just by asking. I plan to call frequently and get the best deal possible! I guess if you really want to cancel, just tell em straight.

Thanks guys.

Hi, Could someone confirm if 172/182 seat fitment is of the same design? I have some aftermarket seats for sale and have been questioned if they'll fit into a 172. Logic tells me that they will and that the chassis/seat mounts are the same but just want to be sure. Thanks, Ben

Right, this was boiling my **** for the last time today! Predominantly when cold, although not always when cold, and driving over any rough ground (enough to cause a bit of movement within the car) I get a squeaking sound that sounds a bit like a mouse coming from somewhere around the front...

Hi, Would appreciate if someone in the know would be able to help clue me up on how theses mods increase performance? (In laymans terms) I'm planning on a custom remap at matched inlets at 519 in the near future with and noticed the Option 1 Cam & Matched Inlets package. I know that that...

As I thought, needed bleeding again. My local garage obviously weren't doing it properly as a **** tonne of air came out the back right. All sorted thanks to Dan at 519, top bloke.