ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Sump bolts



Struggler

ClioSport Club Member
  Ph1 track 172
Has anyone replaced their sump bolts with regular cap heads to get rid of the nasty inverted torx bits?

I want to drop my sump and one of the hardest to get to is already rounded with a couple of others looking worse for wear.

I'd just replace them with standard cap heads if possible, they look like m6x15mm??
 

Struggler

ClioSport Club Member
  Ph1 track 172
Insert joke about the French. I will measure them next time I'm at the vehicle unless someone else on here knows the exact spec.
 

Brigsy

ClioSport Club Member
  T.Turbo
M7x1 iirc, ive used regular flange headed bolts on mine.

Give the head a clout on the originals with a 3/8 extension or similar drift before undoing, usually come out ok doing that.
 

Yarp

ClioSport Club Member
  182 Turbo, E46 M3
I’ve swapped all mine for titanium flange head bolts. I hate those shite etorx things.

I refused to pay £2.10 a bolt or whatever they are for the originals so applied some serious man maths.

The originals are M7 x1 and there are 21 of them I believe. Total length is 25mm so I’ve ordered the same again but looking at the bolts they have a small bit on the end that isn’t threaded so I think I probably should have gone 20mm. I’ll sharp find out when I put the sump on.

 

Mr Trailer Man

ClioSport Club Member
I’ve swapped all mine for titanium flange head bolts. I hate those shite etorx things.

I refused to pay £2.10 a bolt or whatever they are for the originals so applied some serious man maths.

The originals are M7 x1 and there are 21 of them I believe. Total length is 25mm so I’ve ordered the same again but looking at the bolts they have a small bit on the end that isn’t threaded so I think I probably should have gone 20mm. I’ll sharp find out when I put the sump on.


£120 from Renault for a full set 😂
 

Struggler

ClioSport Club Member
  Ph1 track 172
M7x1 iirc, ive used regular flange headed bolts on mine.

Give the head a clout on the originals with a 3/8 extension or similar drift before undoing, usually come out ok doing that.
I gave it a tap but it still just popped off, I noticed though once you have the flywheel off you get a bit better access so will try again at some point. Failing that I will have to get creative, might need a new sump...

I’ve swapped all mine for titanium flange head bolts. I hate those shite etorx things.

I refused to pay £2.10 a bolt or whatever they are for the originals so applied some serious man maths.

The originals are M7 x1 and there are 21 of them I believe. Total length is 25mm so I’ve ordered the same again but looking at the bolts they have a small bit on the end that isn’t threaded so I think I probably should have gone 20mm. I’ll sharp find out when I put the sump on.

Lol this! They ask stupid money for an annoying fastener! Screw that! I'm going to order some, probably stainless over titanium and I'll stick to 20mm, typically the end bit is a locator to make assembly on the line a bit easier.
 


Top