Search results

Hi thanks for that, I removed the TDC sensor and gave it a clean up, but also reverted back to the original air box and it fired up and runs again now, but probably more lumpy on tick over than normal, so I'm not sure what that could be.

Hi guys, Bit of background 6 months ago I bent some valves and after 6 months decided to get the head refurbed and new belts water pump dephaser etc, started it up engine revs were really high (between 3-5000 rpm) so I put a new air temp sensor and map sensor on which bought the revs down to...

Just from previous experience and a ex- Renault tech looking at the same fault, he replaced the brake light switch no better but noticed the tracking out quite a bit got it adjusted and seems fine now I think he was on about a yaw sensor or something like that

Thanks for that, I was going on Autodata for the timing marks for the crank. where do I find the 'o'

I'll have a look in the morning. I know when I put the pin in the slit in the end of the crank was between the 2 marks on the housing.

Hi, I'm after a little help and advise I've just recently built my head back up after the crank pulley slipped and bent some valves so I replaced them and refitted the head, what my problem is now once I have fitted the cam cover and sealed it up and gone to time everything up and fit the new...

Im based in Nottinghamshire, So not sure if their is one locally Thanks

Hi, Any help would be much appreciated, Firstly I have just replaced my dephasher pulley and timing belt etc, bulit it back togther and tried to start it and it would start just turns over but doesn't fire, I have used a the correct timing tools and rotated engine twice to make sure everything...

Hi thanks for your advise with regards the jubilee clip technique how does that work

Hi thanks for that I have been using a 3/8 small extention bar and then conneting it to my cracker bar and I can get leverage but it still won't go on

Hi I'm just re-building the car up from replacing the dephaser and timing belt etc, whilst doing this obviously I'm replacing the aux belt and tensioner but I'm a little stuck trying to get the aux belt back on. I understand that the tensioner needs to be fully off tension but do I need to put...

I've had this problem and have replaced the brake light switch and it's still on, the previous owner had a invoice in the car for diagnostics which was showing the brake pedal switch faulty, Anymore ideas

I have the same problem with mine I thought it may be the relay but I can here it working so I stripped it all down cleaned up the motor and still sticking so, I've just bought a second hand one off ebay for £20 to see it that works

Hi, I have a 2004 182 and it seems to be having a problem with the front wipers, basically sometimes they work then sometimes they don't, even when they aren't working I can still hear the relay clicking but yesterday I took the arms off and I was working to a certain extent granted a little...

Thanks for that I'll have a search through them

Hi I'm fairy new to the 182 world but I have recently noticed a problem. Basically when the car get's hot for example the temperature gauge is half way up there is a noise coming from the engine at about 1000 rpm and it seem's to have a slight mis-fire but as soon as I increase the revs...

Hi Guys & Girls, As I'm new on here just wondering if their are any things I need to keep a lookout on as I've never owned one of these before granted I bought it cheap off a friend who needed some cash it's a 04 plate done 76k good condition the only thing is a noise coming form the engine...