ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. Tomotek

    TomoTek - 182 Track Build here we come!...

    I've got a few bottles left, the plan was to make them up into kits and sell them, just haven't got round to it yet. I can make you up 1 or two if you wanted?
  2. Tomotek

    TomoTek - 182 Track Build here we come!...

    Glad you enjoyed it!.. I do love the raspy inlet and the noise inside!. gets the adrenaline flowing that's for sure!
  3. Tomotek

    TomoTek - 182 Track Build here we come!...

    Yeah car is running great thanks.. We plan to fit a custom roll centre kit in the next 3-4 weeks and at the same time we are going to fit the quaife LSD. Not much more planned after that. It will be the spec we want to race next year I believe I did get them, I have a lot of un read emails in...
  4. Tomotek

    TomoTek - 182 Track Build here we come!...

    Hi Jamie, small world indeed, JJ did say he’d been talking about it too.. hope he was saying all good things [emoji6] especially after I let him have some laps at Donington.. cheers bud, looking forward to getting it out.. were you racing in the C1s then?
  5. Tomotek

    TomoTek - 182 Track Build here we come!...

    Hey mate... thanks, and no worries, there is a lot of stuff in the thread. Running 90Nm Front 110Nm Rear
  6. Tomotek

    TomoTek - 182 Track Build here we come!...

    Thanks!!.. We haven’t fitted it yet, just on the list for next upgrades. I’ll let you know how it compares once fitted [emoji1360]
  7. Tomotek

    TomoTek - 182 Track Build here we come!...

    Yeah it’s on the list, my mate always goes there in his saxo and loves it!.. not planning this year though as trying to get familiar with the tracks we’ll be likely to race at next year. Sent from my iPhone using Tapatalk
  8. Tomotek

    TomoTek - 182 Track Build here we come!...

    Yeah I love it!. seating position is what makes the car I think, doesn't feel like a clio when your sat inside. Everything is where I need it, lets me just concentrate on the driving. Hi mate, we're on 205/50 R15's . so pretty standard Thanks, glad to help!, be good to see yours on track too...
  9. Tomotek

    TomoTek - 182 Track Build here we come!...

    Thanks for reading through the whole thing!. Good to get feedback on what we're doing.. Like I said before, its all about inspiring each other. I took a lot of inspo from GT / BTCC cars during our build
  10. Tomotek

    TomoTek - 182 Track Build here we come!...

    Donington Park complete!.. Both @Jenbo and I had a great day last Friday getting to grips with the circuit and making some setup changes throughout the day.. The car felt mega! (little bit of understeer to dial out).. We both built up our confidences on the brakes too. Donington is such a...
  11. Tomotek

    TomoTek - 182 Track Build here we come!...

    Haha the eternal debate! Probably the most asked question on here My reasoning: Base unit cost, cheaper to run, minimal servicing, not running silly power so don’t need any aggressive locking, smoother operation, great customer service
  12. Tomotek

    TomoTek - 182 Track Build here we come!...

    Looks good mate!.. that’s what the build thread is all about, giving people ideas! We’re looking at fitting a quaife LSD, custom roll centre correction kit, potentially softer front springs.. get it weighed properly, and dyno’d to see what class we will be running in next year etc
  13. Tomotek

    TomoTek - 182 Track Build here we come!...

    Cheers mate, makes the cockpit look loads better, actually looks finished now
  14. Tomotek

    TomoTek - 182 Track Build here we come!...

    I decided to tidy up the doors as not having door cards on was bugging me.. plus we need them to race so that there are no sharp edges close to the driver etc. I started out by getting some paper hung on the door to cut out the profile i wanted. I then used this template to cut out the cards. I...
  15. Tomotek

    TomoTek - 182 Track Build here we come!...

    I've been contemplating this, we'll see ;)
  16. Tomotek

    TomoTek - 182 Track Build here we come!...

    I didn't really take in any cars on my way there.. I was far more concerned about not hitting any kerbs with the trailer.. this one was about 1m wider than ones i've used before. stressed me out haha.. Yeah not far at all!.. have to pop round check out your car at some point, does look ace!
  17. Tomotek

    TomoTek - 182 Track Build here we come!...

    Yeah went really well thanks. Really pleased with its reliability and pace so far. Your build is looking good too!
  18. Tomotek

    TomoTek - 182 Track Build here we come!...

    Hi, yeah I did, about 7am ish, I tow it with my Evoque, if you remember the tow car?.. I’m only down the road near Southam
  19. Tomotek

    TomoTek - 182 Track Build here we come!...

    Hi mate, it was £50 .. picked up on Friday eve and dropped back off on Monday morning as they’re shut sat/sun .. so pretty good deal to be honest
  20. Tomotek

    TomoTek - 182 Track Build here we come!...

    Been a bit rubbish at updating this thread recently.. I have been beavering away finishing off a few things in the car over the last few weeks, all in prep for our first outing of the year at Rockingham last week. I sorted out mounting the ECU on the bulkhead, mocked up and made my own door...
  21. Tomotek

    Brake line flaring?

    I used a proper old school tool that my dad had in the garage.. probably cost a fortune these days!.. I then cut the plastic off after I had formed the end, as you have, using a Sharp blade and a needle file Sent from my iPhone using Tapatalk
  22. Tomotek

    NUTS AND BOLTS

    From what I remember the standard Renault bolts have a larger shank diameter, than a ISO bolt of the same thread, which is used to locate the caliper back plate correctly
  23. Tomotek

    NUTS AND BOLTS

    I cut those down to length.. wanted maximum shank length through the caliper sliders Sent from my iPhone using Tapatalk
  24. Tomotek

    Project Cars 2 Time Trial Challenge February 18

    Yeah I know what you mean, they even have the ranking system now to try to prevent that, but still no body cares.. they can’t win without hitting someone You want to get on iRacing or rFactor2 so much better.. I just raced in a 12hr race around road Atlanta at the weekend!, only two of us...
  25. Tomotek

    Project Cars 2 Time Trial Challenge February 18

    I got so busy with work, I never got round to putting some laps in!.. I’ve been practicing on rFactor2 these days as that’s what our sim racing is run on Sent from my iPhone using Tapatalk
  26. Tomotek

    TomoTek - 182 Track Build here we come!...

    Hi all.. Been pretty busy over The winter months trying to sort out a few things in the garage and on the car ready for this year. I’ll be posting some more updates of what I’ve been up to when I get chance @Jenbo and I have also entered the 2nd season of the Simply Race Endurance Series (SRES)...
  27. Tomotek

    TomoTek - 182 Track Build here we come!...

    Hi.. yeah they don’t have everything on their website.. the catalogue is your best bet. The below pics shows the Brake hardline and standard hardline depending on the fittings you use.. I used the 5-3mm line (649.909) .. at the time it was £3.30 a meter Hope that helps
  28. Tomotek

    TomoTek - 182 Track Build here we come!...

    That’s a good shout.. better to get the correct length for the situation.
  29. Tomotek

    TomoTek - 182 Track Build here we come!...

    Alright mate. Not as of yet no, works been manic so not had time for anything Clio related tbh.. I would like to do something though if there was the interest for it.. probably scare you all away with the price though haha
  30. Tomotek

    TomoTek - 182 Track Build here we come!...

    Hey buddy!.. thanks!.. yeah it’s a great feeling, just itching to get out again in it now!, going to book a few trackdays this year. You got many planned? Hey, no I didn’t have any issues. They had 2 threads sticking out the end of the nut when I tightened them up. (I do have mine going...
Top