Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
On the rears, take out the arch liners and you can go very low! i had custom 100mm springs on the rear with no problems, then raised it up because it was a little too low!
on the front, the first thing to hit is the arch liners......
take out the arch liners and you can go lower until the...
could be a bent shaft, put the car on stands and let it run (leave it in neutral so wheels only turn slowly), should be pretty obvious if ones bent,
could also be CV joints, but it would have to be pretty severe to be noticeable in a straight line,
tracking, wheel bearing, wheel weighting...
twice ive had the rear pads fall out of these shitey rear callipers!! just be thankful you were going slow when it happens!! i wasnt on one occassion and its made for a scarey few seconds of brake pumping!! absolutely awful design so i made sure my pads had some extra retainers now!
however...
dont paint drums it looks terrible and draw attention to your low spec!
have a browse on the non-sport thread, some amazing cars on there!! personally id do a sport interior with some other oem bits, drop it on its arse with some nice wheels...
Its got a laguna splitter fitted atm, as said the skoda ones fit nicely,
and a pair of back lights will cost you around £20, i think theres a set in the for sale section atm.
tidy looking motor! welcome to CS
Aftermarket HID's
;)
probs best get a multi meter out and start trying to problem solve from there, it in theory has to be the ballast,
could well just be a fuse!
since the aircon system effectively has a clutch and therefore is a free bearing when not in use, youre going to gain very little from having less pulleys to spin.
use the search function, most ph1 sports on here have ph2 rear bumpers!
yes, they fit fine
the 182 exhaust wont fit though, you can get 182 replicas for normal ph2 that look the same when fitted.
not even sure if its an update, but
took the car to surrey rolling road on saturday,
pulled 171.2bhp, which believe it or not is a very good result, as most will know most F4R engines pull mid 160's,
so ive gained around 5/7 horses from PAS/AC delete and a 2.5" straight through exhaust...
I think my mate that i was going to have to wait for is pulling out now so ill be TRYING to meet saunders on the drive down, but theres only a hard shoulder to pull over on in the likely case that i end up ahead of you down the m25/m3...
may have to fake a break down! lol
Im sure youre all right about some dick jumping on it because theyre a "top lad"
tbh dude, ive never really been into detailing so i really dont know how deep is too deep, but next time im down my ends ill have to ask some mates with that kind of gear to have a go at getting the dents out!
i...
are you sure its the same car? you just bumped a very old thread! lol
Ill have mine on surreyRR in a few weeks, quite worried what its going to come out as!! but mark saying losing the PAS gave him 7bhp fills me with confidence! :D
Re: Titanium Ph1 172
am i the only person who likes the black roof look?? im tempted to do mine to hide the dents where someones ran over it!! though it will only be in matt black, not carbon
clio looks really nice!! nice to see someone putting proper work into making one mint!
shadey!! scarey to know that kind of thing happens!!
theres a sunflower down southend on sea owned by a woman in her late 30's who probs wont be on here!!
haha wow! i thought the pic was the underside of a light up badge but it isnt!
looks like a load of blue LEDs when on, and just horrible when off!!
and where is that wire even meant to go?? lol