Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I would start with 24psi all round and take it from there, dont go over 30psi ish hot
Factors are gonna all be different, car weight, suspension stiffness, tyre choice etc
I use just the upper, I kept the 3 retaining screws to keep it level, and installed 3 x L brackets from bulkhead to dash. also tied it into steering column for additional support.
Armtech would be better.
If your just looking to install the red turn key style switch then you want the 6 pin FIA variant that kills and earths the engine and alternator.
There is a black snorkle drain next to the brake bottle (to right look at it)...however this is about an inch high inside, there is another drain hole to the left that outlets into wing.
MSAR in SE London have large stock, might be worth a visit to try a lid on.
Ref the open face lids, you wont be allowed to use them in open seaters, just incase you might end up going in one ect.
https://www.msar.co.uk/motorsport.html
Does the disc at the base of the selector lift up?
This should lift up higher than the left walled part of the tower so the gear leaver moves wholly over to the left, otherwise it would be hitting the side of the tower.
I was running the purple series poly bushed dogbone, for racing, and upgraded to the Avol one, as it has less movement. The car popped out of gear de to this movement (even though it was small), so worth the upgrade, however for road use I would advise against it,.
Another thing, make sure your...
Black boarder paint is a special type of paint applied with a small roller/sponge, so the window bond sticks to it, you can buy is from acwmotorsportsplastics
Sent from my iPad using Tapatalk
Iv had my T7 hater now for 3 race seasons, 2 of the outlets are plugged and the other two have ducts going into the original windscreen vents sealed.
When running it builds up enough heat to demist the window and on race without problems.
Only problem I had was when one of the heater face/fin...
From my understanding, if you run the key ring and ecu you have to keep this uch.
When EFI deleted the immobiliser does this make the ring key redundant? Maybe efi be the best ppl to ask.
You can bin the whole lot if you use a AM ecu.
Ps..Renault electrics = minefield
Sent from my iPad...
I run one on the ph2, not sure if its any different, but its not as easy as just plugging it in and seeing the display work, the vbox screen has to be put together in the vbox tools software to know what to look for, you will also need the clio file downloaded off the vbox website, otherwise you...