Search results

Pointless all the little kids will nick them in the car park and then ull feel like a t**t cuz you got mugged by some pre pubescent little buggers ..... Trust me had some really nice trans blue dice 3 days they lasted felt like s**t knowin some little bar stool had one over on me .... Plastics...

Right car is going in to a Motorsport company close by to have it corner weighted etcetc ... But they've sait what do you want ( yes they can just do what they want but I'm asking you guys and gals ) I literally know nothing about suspension I'm on the spax Rsx kit with the inbound spring rear...

Had a lightened flywheel on my vts good bit of kit engine seemed freer to rev and more responsive a good mod for a few hundred quid ( well on that it was ) can't comment on clutch as I don't know enough about it but I hear the standard valeo one is the one to buy ...

Email sales@spaxperformance.com Natasha Dunn helped me out she was really informed

They don't I've been on with them the past few days to see what they can do basically its what it is they can make a custom damper for trax use but no shorter springs I spoke about the psx kit with them and they couldn't do any more .... They've hooked me up an Rsx kit now at a really good price...

Cheers for the help guys spoke to spax thru work today and secured my self a set of Rsx still with the inbound spring so not rear coilovers wich is fine as I'm not after major lows bought them trade £517 delivered :) so spent a bit more but at least in work I can put a deposit on them then pay...

Excellent :) I've got some time off the end of the week so going to have a bash at this then :) also going to have a go at ur guide to lowering the steering Column as my seats bolted to to the floor pretty much... Some good work and good advice from you guys :) thanks

That looks good what did you do with the icv pipe? Just leave it hanging in the bay?

Hi powered jet wash might do it ...... But chemicals like thinners or nitro morse but have a bucket near by to wash it straight off... Just go careful and keep an eye on it all

Good point ... I know you kno you'r shizzle what would you run ? I've got the jms air box and enough pipe to make a ktec induction kit ... Also where would you take a cold air feed from? Standard?

Hi guys I'm looking at the spax psx suspension kit lowers 25mm and has adjustable damping ( which is what's tempting me most ) I've ran the, on my m&k 6 fiesta and they were good but that's a fiesta ... Other than customer service issues which don't phase me as I'll get them direct from work...

what suspension set up you running on the phase 1 ? looks nice they 15`s or the 16`s? sweet looking cars :)

There only -25mm on the rear rant they? I'm just worried as I'm on 15s that it might look stupid like a monster truck lol what would u say ur fronts are at, I'm on some nasty 60mm springs and the front looks about as low as urs , wich is perfect hmm it's a pain because its one of them things you...

Is that on the psx or vmaxx kit it sits beautiful!!

Just wondering if anyone's got a pic of a phase 1 lowered 25mm on 15s a phase 2 pic would be fine too .... Basically due to unforeseen circumstances my suspension budget is now either spax psx -25mm with adjustable damping or v maxx coilovers I've had the spax on my fiesta and liked them but...

dont use hi build ........ you need to clean them off with pannel wipe/ degreaser and lightly dust over some plastic primer a few light coats to allow it to stick and then do the same with the paint a few light dust coats ...... hi build primer wont adhere well to the plastic and will flake off...

could be a dogey crank sensor try removing it and cleaning it .... but either that or map sensor had a saxo with similar probs was the map sensor in the end

Hi there just wondering if any one on a phase 1 " or 2 " has got a pic of them lowered 25mm on 15inch wheels.. ive been offered a set of spax psx but there only 25mm and I dont think its going to be aesthetically pleasing enough as id like to get down to 50-60mm ... plans are for fast road and...

Hi there any one on here make proper air intakes for these fogs ive used 2 80mm ducts off the bay but there just not that special i was wondering if any one actually made smoothed fiber glass ones... im going to have a smash at making my own but before i do i want to know if all goes wrong ive...

h&r coilovers are as makes no difference £1k .... i should imagine theyd be good

Now thats customer service !!

Cat * apologies for I phone corret every thing you say auto but in correct

Looks like a faulty wheel bearing to me ..... Joooookes quite aparent it's buggered I wouldn't waste the time welding that go for a car back system will be less hassle in the long run

Needs interior spraying needs the cage spraying needs new suspension needs geo setting up needs a smaller steering wheel as dished ones too big for fixed bucket needs a spazz anger bucket seat... Needs £1200 throwing at it needs to be a mk2 xr2 with a zetec turbo lump in it with 300 horse and...

Stay always from black diamond ... Got a set thru work overall the performance is good when cold and good when hot but when just warm ( pottering round town ) there shite and the dust is unreal 2 weeks of short journeys and a few 40mile journeys and my wheels are brown with dust and its a...

I've literally just had a new dephasar and on the box it says genuine renault ... Made in Japan ... Had a massive chuckle at that one so yeh I'd imagine it does

Hi I've looked through the old threads and there is plenty of them! And it all seems to be personal pref to how it's all set however I personally will be fitting spax Rsx coil overs end of the month and would like to set the camber, toe, etc I'm planning to use it for a spirited road car whilst...

What a weekend done fixed and mounted as low as hell corbeau revenge seat ( new not 2nd hand tat ) gutted the rear and tucked all the wiring into the quarters out of sight cut the seat mountings out and smoothed off any obscured edges painted the whole interior arse end and started to paint the...

Could be interference from the engine some place like a coil or something you can get noise suppressors.... It could and most likely be the amp I'd try another amp check and if its that.... What gauge power wire are u using too thin a wire could cause alot of resistance is a demanding system...

Also uve mis read what Tim said as the standard door is 13cm so not 0.5 to to modify would need 3.5 cm outside diameter modified ...