Search results

a bit a of string.........................? Sorry LOL

I asked about the 172 pedals and they are stupidly priced as they just replace the std ones! So i bought these and they cost £20 from direct car parts and i am well pleased.:D You do need to drill holes for these ones but there are instrutions...

turn lights on and open the glove box, find where the light is coming from??? You must have a light in the glove box?? mines in on the roof of the glove box on right a bit

I had mine made up from lockwood they say "clio 16v" They were £30 and attach by two double sided stips http://erc.qmuc.ac.uk/cliosport/file.php?image=1058561327__Pict0006.jpg

oops yeah i seen it after i posted !

http://www.maplins.co.ukwww.maplins.co.uk and search cold cathodes

is yours a 1.2 16 v DOH just seen your first post!

does it makes a luuuvvvy sound??? are they any gains BHP wise? is yours 1.2 16v?

yellow bar is a strut brace stop body roll when going in to corners, so gives improved handling. Is that a Ktec Ram air indcution kit i see?? Any good?

check the oil level, happen to me when i went round corners quick the stop came on and then when off again! Even if your sure the oil lever is fine just check it, that sorted my prob anyway!

Funny though i got caught by that excat camera and at that excat speed hmmmmmmm!!! Funny though! had me worried for millisec!!!! when it produced a result on my reg! i stick to the speed limits anyway!:D

I have 17 x 7 Super ts on mine and its lowered 60mm i have had no problems i think 7.5s would rub

The uploader thing is working noe so here the pic http://erc.qmuc.ac.uk/cliosport/file.php?image=1057338702__Pict0003.jpg

What you email i will send you some as the uploader is not working f**ked it up though!! big hole in mesh!!!! I am going to do mine again when a have some time!!! this time i will be taking the bumper off and doing it properly!

I have meshed mine BUT its hard!!!!!!!!!!!!!!!!!!1 I ended up with cuts and grazes all over hands & arms!!!! Are you taking to bumper off?? (recommed it)

Had mine since Nov 02 and just done 13 000 I love it, better than most cars in its class!!! as mentioned b4 Comfortable (was until -60mm!!!!!:oops:) Quick for a 1.2 Cheap to run and insure Looks good! Lots of lil bits like airbags and ABS Heres pic of mine...

Test drive it here! http://www.renaultsport.co.uk/172cup/cntral.htmU face=Arial color=#800080 http://www.renaultsport.co.uk/172cup/cntral.htm/U

Yes they should fit use a cloth wrapped round a screwdrive to pop the old ones out twist the bulb out and replace with new ones

I ll give fred some thing to aim for now!!

Wonders wheels is ok but wear gloves if you can and avoid the centre caps! I have oz super ts so wonder wheels is a life saver when it comes to multispokes! Good choice of wheels BTW!

Youll just have to buy coilovers and drop 100 mil like freds!!! OR you will have to buy biggers wheels tp fill the arches!

The 172 one are £20 each!!! as i enquired when i bought the car I have changed mine to sparco ones, cost £20 for the set and i got reno to fit em before i picked the car up! http://erc.qmuc.ac.uk/cliosport/file.php?image=1055519757__Pedals.jpg

Yeah me and bud from work did the tints over the weekend, just the rear to do now!!!:@ Had a go at the back window but it is so hard to get all the tint smoothed out!! Its got to many curves .So had to rip it out and i am gonna to see about getting the pros in!

I HAVE TO THANK FRED FOR ALL THE HELP AND WORK HE HAS DONE TO MY CAR!!! CHEERS MATE!:D The colour coding was £200 done by a mate, and if you near cov imsure he wud sort you a good price!;) Car is Platinum sliver The car is dropped 60mm on pi springs (Freds old ones!) and got 17" x 7" OZ...

17 will been fine mate! minw has now got 17s on and lowered 60mm and i have had no trouble! (pic below) BTW welcome! http://erc.qmuc.ac.uk/cliosport/file.php?image=1055351479__GC1.jpg

I have circled the clips in red that need to come off!, be gentle with them ! but they are hard to get off!! i broke two and now rattles even more! http://erc.qmuc.ac.uk/cliosport/file.php?image=1055280043__Door_with_clips.jpg

Yeah mate i did this at the weekend to get the window out! you took all the screws out you need to take the speaker ones out!!! and pull hard at the end of the door to get the clips off, does cut you fingers though! Whats you email addy and i will send you some pics!

Rob go get it done! car looks miles better with it!, get rid of the orrilbe black placky bits! When i had mine done the guy knew he had to sand and prime all the plastics! but if you ask them how they do it becuase your interested then i am sure they wont mind? Had mine done for about four...

Be good to do another! See how many we can do in the year!

i think am going for blue too, i ahve the black dyni interior and sliver exterior are they easily broken? Are they glass? i have bid feet and dont wanna lkick em in the footwells and break em! May put them in a placky tube to protect them more