Search results

This might make a good base to build something special like the Subaru/Clio hybrid. Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=151467084376&alt=web

Does anyone know what thread sizes are on the power steering hoses going into the rack?

Found out today the adjuster bracket had sheared clean in two. Anyone else had this problem?

I removed my ABS a while ago but one of the plugs is still connected. The smallest plug is the ABS sensor in the hub, the big plug is to the ABS module. The middle sized one is still connected but I don't know if this goes somewhere where its not needed. The wires one the plug pictured are green...

Who does dog gears for the JC5? Gripper and Quaife? I can't find any details on gear kits in terms of ratios and prices.

Killed my DS2500 at Outlton yesterday, I now have some shiney glazed pads and discs which need replacing. They've been fine until now but after a session of getting used to the better tyres and suspension I've been carrying more speed, which means less slowing down to some degree but I'm also...

Does anyone know how long the standard rear hub bolts are (1x M8 and 3x M10)?

I've fitted a new 22.2mm cup master cylinder to remove the ABS on my ph1 and it's all bled correctly, no spongy pedal and the brakes are strong. However, the pedal travel is longer than it was. Should it be like that? Also the ABS light is on (obviously) but I've also got the SERV, STOP and...

I've got all the bits to remove the ABS on my Ph1 but my friendly MOT man said he won't be able to pass it without the ABS light coming on for a few seconds then turning off because the car came with ABS as standard. Will I have to make something up to turn the light on with the ignition and...

On Sunday I got my car back together with the new genuine Renault shafts. It's been fine since, in fact its been brilliant, absolutely love the car now its on ASTs and the roll centre correction kit. Last night the gearbox oil started leaking, I'd heard a slight clunk on the way home and...

When fitting a roll cage which goes behind the dash do you lose anything like vents, tweeters etc. and is there anything that needs relocating such as wiring or fuse boxes?

I'll be removing my ABS soon and need to get hold of a new master cylinder. With standard brakes or even 4 pots with an equivalent piston area, is it worth getting the 23.8mm 406 V6 cylinder or just stick to the cup 22mm cylinder? I don't want it to be overbraking all the time, especially if...

I could have saved a few quid buying this instead of doing cams, ITBs etc. If only I'd known... http://www.ebay.co.uk/itm/MINT-RENAULT-CLIO-172-CUP-200BHP-2003-/181403320359?pt=Automobiles_UK&hash=item2a3c7b0027

mike1pow by Hanger 75, I think it was yours.

I'm getting some AST coilovers soon and with the rear being a full coilover I was considering getting the PMS rear beam kit. The questions I have are:- Is it worth it? Do I need it? I use the car on track and I'm looking to start competing next year, I won't be racing but I'm going to start...

On Wednesday @Chi @minto and @cairnsie_cup and I went on a trip to Anglesey circuit. Although Ian and Craig's journey was about 300 miles more than mine! So I rocked up with 10 minutes to spare with my wife's support vehicle in tow. The others had sorted a garage ready :) Got a quick pic...

Looking at getting a set for the Clio to do track days. I had a set on my last car and they were a brilliant tyre, I ran the H1 (hard) compound so it took a few laps to get them up to temp before they really started to shine. On the Clio I've got a choice of 195/50-R15 in medium or 205/50-R15...

I'm looking to upgrade my Koni + Cooksport combo. Its a brilliant all round setup so I'm a very wary of replacing them and then not like the ride on the road. I could do with some height adjustment now as I've taken a lot of weight out of the front of the car so it sits quite high. If I was...

Who's is it? With RSRs and a Javelin trackdays sticker for 30th October.

This is how it sits on the existing Pro Race 1.2s. I've only had them 6 months and a friend has these hockenheims spare. Always had a soft spot for them. What are your opinions? Might look better 'shopped properly with the same wheels front and back with tyres but my MS Paint skills don't...

I run the Federal RSRs all the time, they're cheap and cheerful and decent enough when its wet and quite acceptable in the dry However I was considering getting some medium compound slicks for nice dry days on a spare set of rims. They're cheaper than R888 mediums, and the DZ03G only come in...

I've noticed some fibreglass copies you can get from rally suppliers but how do these mount compared to a genuine one? I know prima racing do a similar one but I don't like the look of it, it sticks up too much. Anyone know where to source a S1600 type spoiler? And to avoid the 'it'll look...

Any methods for stopping the ktec 172 exhausts drooping on the rear hanger? It's as tight as it'll go. My only thought is to put a high temp band of silicon around it, maybe the self amalgamating hose tape.

Having been through the F4R manual I noticed this:- The solenoid valve is closed at rest. It authorises the passage of oil to control the phase shifter in line with the operation of the engine: - if the engine speed is between 1,800 and 6,500 rpm, - if the throttle potentiometer is not at...

Fitted the Gen90 and ITB kit to my ph1, everything works bar the rev counter. Any ideas? Going to give KTec a call later about 5 ish to see if they know the reason.

My ambient temp gauge is way off. How do I sort it?

I'm nearly finished fitting my ITB kit but I can't see anything to connect the FPR to. Have I missed something or am I missing a part?

Black 182 with a RS200 badge by hanger 75...who is it?!

I've got Samsung 5.1 system at the moment but the receiver won't play discs anymore and half the speakers aren't wired up because of the wires. Is there anything half decent (I'm not a true audiophile) for around £200-300 that has wireless speakers, will play cds and dvds (blu-ray would be nice...

Am I correct in thinking the DTH ITB kit from Ktec comes with the locking aerocatches?