Search results

Just tried to order some 3/4 plates on www.fancyplates.com using revels guide on here, everything is fine except there is no option for 520x84mm. You can only have standard size or 380x84mm, what am I doing wrong? Also the picture in the plate calculator shows no spacing between the first 4...

As above, what is the wheel bolt length that 1^2's come with standard?

I'm looking for a good product to clean and protect my upper and lower grill and foglight surrounds. I'm not sure if it can be done in one step or might need more. Currently I use aerospace protectant but it doesn't give the best results unless you can wipe it off. (Excuse my lazyness) Its too...

Right I know these threads get done all the time but I can't find something specific to what I want to know. I don't have the car to hand as im working away and I would normally physically check. Im needing something ordered so I can blitz all the work when home. I have FF 16" 5 spoke alloys...

I need to seal the cam cover on my new cup. I don't have all the timing tool's to hand but I do have the horseshoe (the type that bolts to head if needed) would you suggest removing the cam cover with this in place, cleaning and replacing. I'm sure it would work, not ideal but the only thing...

Im going to be doing a full suspension refresh on my new 172 cup that I will use for a few track day's this summer, the car will then be given to my mum as a runaround after that so I don't want a harsh ride really. Im going to replace all the dampers with new OEM and while at it I was going...

I thought I would post some pictures of a lad I know's VW Bora, he shares a lock up with me and I thought some would appreciate the pics. Its one of only 150 4x4 Bora's in existence (so i'm told) He has swapped the engine out for an early Audi TT V6 engine which i'm told is stronger and has...

Hello folks I am no computer whiz so keep answer's simple please if there is a solution. I am currently on my work's computer using cliosport, I just tryd to log in through google chrome which is what I usually use but it is coming up with a Malware error (google window) and I am now using...

Not sure if it's the right place to post this but does anyone have the maximum speeds for each gear in the 172 cup. It's 1st & 5th I'm interested in particular.

I am looking for a graphite grey/anthracite paint to do my cars interior and cage, I have been recommended to do it in 2k paint as it won't require a lacquer coat and with it being tricky to paint the inside, it would be better to avoid the lacquer which tends to run easier than base coats. My...

Do the phase 2 rear lights have a fog lamp in each cluster??

Has anyone used one of these tools for changing inner track rods on the 172/182, seems like a really good option. http://item.mobileweb.ebay.co.uk/viewitem?itemId=320792441592&index=1&nav=SEARCH&nid=13754933186

Im in the process of refreshing my engine and I have these seals from a bottom end gasket kit ( I think) that I have no idea where they go, tried all sensors etc for the washers.

This could be a very handy little car with some finishing work, knock a bit off the price and you would be quid's in IMO. Goes round Cadwell very well for a 1600cc in his old vid...

Would someone be kind enough to send me a copy of engine and chassis torque settings. I have most manuals but can't be as**d sifting through manuals just to get torque settings I'm looking for a settings table if the French frogs done such a thing. Most manufacturers do. Cheers Morgan

I have bought and will be fitting a set Jenvey ITB's fitted to my mk2 soon. I have already bought a phase 1 pedal and throttle cable. The pedal fits with some adjustment but the cable dosent fit into the ITB's in anyway. I have seen a cable on the jenvey site that will fit in ITB's but how do I...

Right I'm building a 172 to go racing with and I'm havin trouble to find seats that fit well. I'm 6ft 2" and 36" waist with wide shoulders. My problem is I have no where near my house I.e demon tweeks or the likes to go and physically try seats out. I have already had delivered 2x Sparco...

Hello folks I have been on CS for long, I have been lurcking around but haven't posted much so I thought I would start a project thread. Its going to be pretty brief as I hate typing essay's. I decided to go racing in the 2013 SMRC sports and saloons and decided on a Clio. The car will be...