Search results

Buy a v6 Clio?

Brilliant, keep it up

http://shiyanthegreat.com/Clio2/F4R_730.pdf This will help mate :) The laser cam locking tool is pump iirc as someone on here said. Where it is measured for torque in da.nm that means you need to x10 For example 2.2da.nm = 22nm torque and I'm not sure there in any angular torque involved...

Pic not showing on tapatalk

It's part of the auxiliary setup mate not the crank, just take the tension using the alternator if a cup remove belt and remove the star bolts as well as removing the coolant hose swap over pulley onto new one and reverse steps Edit, well it does come of the crank pully but not part of the...

Dogbone mount on way out? Sloppy gearing aswell?

3 base dependant on paint type and 2-3 clear. Candys and pearls I do 3 ish to the point I'm happy the colour is decent enough. More clear the more you can buff. Enamel is bake job ideally and if it's garage spraying then it's hazardous and environmental ppl might ask questions if you have a...

Dephaser pully dent in near side rear panel where someone reversed into me pas lines again leaking offside front Coilover leaking from constant pothole abuse crack in rear light cluster from same said reversing And crack in rear bumper from as above hadbrake cable lug missing on rear calliper...

Lol didn't even realise the date ;) I did a polo rad search and instantly assumed it was upto date! I agree Danny, sorted :)

Call this guy and get measurements? Look about right http://www.ebay.co.uk/itm/LAND-ROVER-DISCOVERY-1-RADIATOR-BLEED-PLUG-O-RING-ERR4686-ERR4685-/270951685276?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f15fa9c9c#ht_2336wt_970

Beautiful example :) I really like how people hold on to things most cherished by lost ones. And how for example people keep everything the way it was once they departed. All the best with this. /Craig

Low mileage the better. eBay is a good shout but make sure you get the logbook etc and a recent service history to say its what it is :) £600 I payed for a 38k delivered. Hope this helps

I get this when after time the boddies need a good balance as over time the give in the adjusters for throttle on each 6kg of air /hour slips. Then it's runs like a dog slightly :p However on topic I have the omex floppy wired one and it seems like its doing a good job.

Ha yes he was :p my misinterpretation. The idle speed control valve right? It's not a necessity tho? Ive been reading the sticky on building your own turbo and it was great :) Thanks for all your help.

Brilliant read mate :)

Cheers for the replies, and info on the spark vs fuel table. This is not really going to be a problem as I will be moving on from this. True stick with what you already got but it's nice to have a change and I really only young once (27) and the money is decent so it's nice to explore the...

Wag 1 - that's good new but I'm lead to believe now that I have the basic loom with out map that omex made. So it'll be the install the map up to the existing loom or rebuild one And that way I can include auxiliary cabling too T.trophy and Ryan j - no as I can see it becoming more unreliable...

Evening, I have a few questions about going from itb's to a turbo conversion. It's a 172 mk2 with jenvey boddies and omex 600 management, 1. Can I use the existing loom that omex uses (injectors etc) 2. Can I keep the omex sensors? 3. Can I use the brake servo pipe that is now attached to...

Had an argument with the missus so hit the e-brake, left hand down, and hoped for a decent side impact?

http://www.cliosport.net/forum/showthread.php?491026-Lump-of-metal-under-engine-mount/page2&highlight=Engine+lump+of+metal Theres a sneak at it here. As I said, light out, slide forward. Needing the bumper off to access the light bolts and then undoing the top mount. 65nm torque needed. Weight...

Rough up an old post, easiest way this is removed? Guessing top mount off, head light out and slide towards front of car!? 3kg is free hp for sure ;)

What plans you got? Boot carpet price?

Camber On mine was 1.5deg Pos and 0.5deg Neg on a 45-50mm drop iirc

As Title says, spotted on S/M Car park

Although it is a technology chat, why not also make it history orientated ;) I remember someone asking for certain papers on writings to help with a degree they were writing for. So i have now got aload of papers that may come in useful. A Gem Of An Idea - Mrs Killick and the Sapphire...

If there D2S Bulb Fitment then yes

Bump. I have still had no guidance on this and would like to be able to help ppl should this ever arise again. Searches on here don't help. Ditz hasn't answered me. Thanks

Hiya all, I am currently wanting to install a push to start ignition in the 172 and have took a few pics of what im presented with and wanted some deffinative answers. First all these are the 4 wires from the ignition barrel which provide the main starter motor power. Which of these 4...

http://www.dft.gov.uk/vosa/repository/MoT%20Issue%2031%20-%20Apr%202006.pdf Page 8. ;)

ITB's FTW All you need is an over run map and get popping!! ALso any chance of some pics?