Search results

id say the starter motor would pull about 100A. so it must only be what it takes to close the relay that goes through the barrel which it probably 1A Max. surely the start part is only a switch in the barrel, so the relay should be in parallel with that. which would make it able to use the...

i wouldnt have thought that the power of the starter motor would go through the ignition barrel. to be honest it sounds like you have not wired it correctly if you cannot start it with the key IMO

that looks quality!! will you be doing a how to guide??? i think i could do it myself but would an idea of how to do it first

i found that the rear speakers were a lot heavier than the front ones on my mk2 id say theyd weight about 250-300 grams and 13cm (5 1/4")

nope only put positive on purpose. he could use two 8 awgs for the negatives as long as they go the same place

yeah it would make a quality in-car pc but i doubt the hdd would last long with the state of most of the roads in the uk

if it is 4 gauge cable for the positive then that would be fine for both amps. with the remote you should be able to take it to the first amp then put a link in to the second.

doesnt the top spec non-sport come colour coded??? the initale? or something like this

ahhhh so you will be running speakers off the hu, in that case if it says it needs a direct batt connection then thats what you will have to do

http://www.m-99.co.uk/Electrical/12v_or_24v_Converter_to_1_5__3/12v_or_24v_converter_to_1_5__3.htmlthis is what you need if it comes with the right plug on the end

yeah just get something like http://www.maplin.co.uk/Module.aspx?ModuleNo=30444&TabID=1&source=15&WorldID=1&doy=9m1this put it as close to the batt as poss and only put the same size fuse in it as in the back of the hu

bloody electricians everywhere:D there probably is one you can get to plug strait in to the cig lighter (post posted below) but that was the first one on google [Edited by Dink on 1/9/2005 6:07:38 PM]

does it run of 12v?? and you need something to convert 24v to 12v? if so try http://www.m-99.co.uk/Electrical/24V_to_12V_Stepdown_Converter/24v_to_12v_stepdown_converter.htmlthis [Edited by Dink on 1/9/2005 6:00:10 PM]

its due too the higher output of the internal amp. if the stock wiring is capable of doing 15A (i think thats whats in the 9835) then you may not have too. p.s nice choice:D

it was a little harsh. ill keep my comments to myself next time. but i still believe they should be binned.

Quote: Originally posted by Bryan on 09 January 2005 http://www.salford.gov.uk/360litre.jpg ditto

cool i modded my glovebox light the other month. Managed to squeeze 10 5mm white leds in there(bit of a bugger cos they are two slightly different colours:cry:)

the sony will do 400wRMS into 4 0hms(a dvc sub with 2 ohm voice coils) or 330wRMS into a dvc sub with 4 ohm voice coils with a voice coil per channel

you could do but you may have to put a voice coil per channel (which is never a good idea) it also means you will not get the full power out of the amp just did a bit of research and that legacy is a f**king joke it only does 2x 85wRMS at 2 ohms [Edited by Dink on 1/8/2005 1:33:59 PM]...

http://www.talkaudio.co.uk/vbb/showthread.php?t=95068talk audio

1 or 2 voice coils? 2 or 4 ohms?

i cant see any problem with doing that apart from it will sound like sticking your head in a metal oil drum and beating the side with a lump hammer with cotton wool shoved in your ears.

Quote: Originally posted by Shaun182 on 04 January 2005 ^^^^LMFAO.... are you Welsh..?:p :o

http://www.letsbuycaraudio.com/main/product/152/3/1564This one Dan?:sick:

osram silver stars:) £39 for both dipped and main + free blue vision side lights:D this was using power bulbs discount [Edited by Dink on 1/4/2005 12:55:26 PM]

http://forum.cliosport.net/display_topic_threads.asp?ForumID=3&TopicID=129892&PagePosition=1this looks sweet

remember you will have to buy a seperate dvd player to go with that if you want to watch dvds

nah once they are full they just need topping up

i think you will be fine with the alt (if its in good working order) ill be running a 100A amp in the back of mine soon im sure i wont kill the batt if im careful

does the rcas plug strait into the back of the hu??? iy might be an idea to see if you can get some 90 degree plugs for the rcas