Search results

I know the thing you're on about...it was in that alright :) The linkage just above the washer bottle has about 1-2mm play in it! Just that one linkage has play in it the rest are fine for some reason...

Twingo r2 brakes?? http://www.cliosport.net/forum/showthread.php?644483-Big-brakes-using-Renault-parts&highlight=bigger+brakes+twingo

After 8 months of a worn wiper linkage squeaking like mad.. I finally changed it!!! such a relief :D

Yep, Prima made 15" rims too (1:1 copy, only difference is it doesn't have speedline stamped into the alloy) Here are a picture of prima 15"...... Willy wheels look class on mk2 Clios :) I think 19 turbines look even better ;)

What size are the brake discs?? ap used to do a big brake stup for mk1 clios that fitted under 15" alloys, the discs were 295mm!!

15>16 wheels :) Bigger then the 259mm originals :p

Thanks, ill try and order them later on :)

Was only checking what the discs looked like :) ive s**t discs back on so the new ones won't be getting rusty in the shed ;)

Cheers buddy :) The loom was originally a Williams loom... With the ecu connector cut off and my new ecu connector soldered on, Few connections altered(throttle postion sensor added + more) Cost £35 for the Williams loom posted to Beanies places and £175 delivered to Ireland :) Can get...

Hi, Just after fitting 406 Brembos to my Williams :D One of the bleed nipples thread is very bad :( Anybody know what size these bleed nipples are? I found these....stainless steel ones... http://www.moto-racing.co.uk/prod/HELBleedNipples I know the disc's are on the wrong side... I was...

It's only bolted on for Clios :) 4 torx bolts

Yep 20mm :)

When you say mk1... what do you mean? mk1 Clio 1.8 or 2.0, or mk1 172?

Post in the wanted section that you want a ac compessor.... I'm sure someone will post one to oz for you ;) Should be loads about as people removing ac for weight/cheaper cam belts :) I've about 5 at home lol

Nope that won't fit a ph1, This will fit mk1 and ph1 172's :) http://www.ebay.co.uk/itm/161147443831

Bought one last week, Like the look of it anyway... also only £8 replacement bushes... instead of £40(?) for powerflex ones! Havent fitted it to the car yet as its ripped to bits :) They also sell the dog mounts to ktec!

Thanks, Yep a nice ph1 172 box(jc5 089) It has 65,xxx miles on it :) No crunches, Had it in my 172 since 2009 before fitting it to the willy in 2012 :) I also have two Williams boxes as spares! One on 68,000 and the other on 103,000 miles(Jc5 014) Hopefully I won't need them ;) I fitted the...

On the old seats or new ones? When you say rounded off.. Is the bolt still on there or just broken off? Tried beating a smaller socket over it?

Changed my mind on the 172 manifold... So last saturday I swapped back the steering rack, So now running a williams rack instead of a 172 one, Basically I'll be able to get the car up and running faster as I wont have to take the car on a trailer to someone to make a cat/decat... Aka...use the...

My anti roll bar bushes... Williams - 172 - powerflex :D Look where the bar fits into on the williams and 172... Slight difference ;) The williams also passed the nct/mot 10 miles ago with that bush.. :S Anyway.... I got purple powerflex bushes arb and wishbone bushes on "easyway payments"...

10/11/13 Fitted the engine loom today.... Than went to fit the manifold so I could put the engine in.... For some reason I couldn't get the manifold gasket to close the gap... :dead::drunk: Sent it back to pepper performance for them to sort it out..... (still haven't received it back :(...

06/09/13; Sanded the inside of the inlet manifold today... Before; Its weld from the company that made it... I thought they'd have it some bit clean before sending it out!! After; Looking some bit better anyway :) Must get some smoother sand paper tomorrow to finish it off! Took about 3 hours

05/09/13; Very long week waiting for the engine loom :( Fitted the gearbox to the engine today :) Also fitted a 172 starter and a metal coolant pipe tonight, Tomorrow evening hopefully I'll get to fit the thermostat housing and also the coolant pipes(all the hoses are still connected to the...

€450-500 for a good one... Should be alright :)

I meant the 172 head not the evo ;) Seriously good Renault mechanic if you need him to do any bits to the engine etc, I've dealt with him for the last few years :) (if you want his number pm me)

172 is a f4r also.. But more hp out of it(not sure what's the difference) The senic's had the f4r fitted also.. but same hp as the laguna.. Basically you need a clio 2.0 engine, Or rebuild yours :)

The engine from the laguna is different spec, Its a f4r probably(same as the 2.0 clio) But its on 140/145 ish brake, Theres a fella on donedeal breaking 172 clio's ;)

b*****d......... I rang wanting to buy that car :( Did you rip the head off the engine yet? You know Mark Lynch from Enfield, Meath?

Was the megane 2.0..... a mk1 or mk2 megane?? the mk1 is a f7r(same as a williams clio) the mk2 i think was only a 140bhp ish f4r(same as the senic 2.0) Not the same power engine as a 172 clio :)

flol :lolup: