Search results

Pity they don't fit mk1 racks :(

I thought you put a 197 engine in a kangoo :(

Never tried... You seen this? http://dx.com/p/obdii-bluetooth-car-diagnostic-cable-black-blue-orange-dc-12v-42825 Not iPhone I know... but a cheap kit all the same :)

Williams speedlines are 15x7 Dan ;) 16V are 15x6.5 as you say :) Punto pcd is something like 4x98 isn't it? Not sure how the 98 will affect the 100...

Seen before that "diagnostics men" saying a clio ecu was dead... Turns out just broken wires in the engine bay!

I'd just put silicone on top of the old sealant, The heat from the bulbs will dry it out soon enough

I was gonna say... Brown plug...knock sensor? Or am I thinking of 1.8/williams....

If your not getting a Renault one.... Try your best to get one with metal teeth in it! (instead of plastic ones)

A friend sent me the link for these before, http://www.meganesport.net/community/showthread.php?67865-Mr-Pink-s-250-brake-pins-interest There new better pins that won't seize up :) I was gonna buy them but they won't fit the Peugeot 406 brembos :( The megane 225 are the same calipers as...

Thread about it here, http://www.cliosport.net/forum/showthread.php?717623-Ktec-Talk-about-100-profit-(well-kind-of)&highlight=rip+off From K-tec, http://www.k-tecracing.com/show_product.asp?id=4808&appid=2 From the company that supplies them to K-tec...

Mk4 golfs had them.. 1 bolt holding them on the hub :) i forget what kind of bolt it was though(xxmm or torx) With the torx on clio's I shove a t40 in them and beat it with a lump hammer to free it up :)

Whats keyway Fred?

30% bigger exhaust ports on ph1 engines :)

http://www.motexperformance-shop.nl/c-1219122/contact/ http://www.cliosport.net/forum/showthread.php?694889-New-quot-Cheap-quot-Big-Brake-Alternative-(Brembo-300mm-discs) The brackets for 197/225 brembos are €250 iirc :)

Easy enough, just remove the wiper arms, then the scuttle panel...3 bolts holding the motor in, Biggest pita is removing the wiper arms... but if you have that tool it's simples :) (best €15 I ever spent!) Mine squeaks when in use :/ anyway to change the bearing in them?

Rs1? Take off the slam panel and you should be able to see how to remove it a lot easier :)

Well it's €250....euro... so it'll be cheaper in sterling ;) (£200?) The bracket to fit 406 brembos to mk2 clio's is €95 from the same company who make the meggy brackets.

In the brembo thread.... The bracket for meggy calipers are for sale for €250. It refers to the way the brakes are mounted by the bolts.

That was drivers side = rh side

Also.... a 172 box has trouble with the power from a 172 engine..... How long do you think the 1.2 box will last until it has to come out?? not too long would be my bet....

Had my mk2 1.2 8v box at 107mph,

Put a ad up in the wanted section??Do you mean the crank pulley?

Front left hand - Drivers front caliper Front right hand - Drivers rear caliper Rear left hand - Passengers rear caliper Rear right hand - Passengers front caliper

2003 172....shouldn't have a speed sensor hole in it... (aka .... Speed read from abs) Any 172/182 box will fit, Ph1 box has longer gear ratios...(jc5 089) 182 gearbox is code jc5 130 There's something done to the 182 boxes that they don't blow the dif cir clips.

Sure try the fuel pump and go from there :)

What mk/litre polo rad is needed?

Lucky fecker!! :)

I know some fella who bought a 172 clio that went into a flood of water(the car woundln't start after) All he did was take the spark plugs out and "started"/turned the engine(to let the water out) Car is perfect since, Worth a try anyway :)

The black non adjustable powerflex bushes don't need welding(purple and yellow still do) So I assume these new ones don't need welding either, Any price on these yet??

Ap racing used(still maybe??) to do a 295mm disc for mk1 clio's....