Search results

I have my standard engine loom out of the car and i am thinning it out so i have a few questions. Speedo - I belive the sensors that are over the ABS rings work the speedo in my car. Do you just need one or do all four need to be connected for the speedo to work? Connector on the brake fluid...

Not a particulary amazing video but this cup car sure gets a battering over all those curbs! The guy driving it just smashes it over curb after curb after curb (hero stylie!) The suspension & bearings must get fooked after 20 laps of that track!

The information below has been taken from the Omex 600 Manual and I just wanted a little bit of reasurance that I have read it right. Cooling Fans The ECU has two software outputs switchable on coolant temperature values. These would normally be used for cooling fans. The two outputs may...

I've quickly drawn a picture to see if this is the right set up to have to delete the ABS and make my own lines and bits. The Bottom Black circles are the Front brakes Top Black Circles are the rear brakes Green Square is the 182 Master cylinder Blue square with the circle on top is the bias...

I know of there been race filters for the V6 airbox and things like that. Ones that have to be cleaned quite oftern. Does anybody know of a manufacture that produce a Race filter for an ITB set up? Also a question for people who have run different filter on their ITB cars, which filter is...

Found a local Scrappers that had a Volvo 480 Turbo. I took two rubbish pictures of the parts i think i need to delete the AC & PAS. Can somebody confirm that these parts will fit the F4R engine. First is the bracket It seems to be longer on the left hand side compaired to this part...

Just a quick question, Can you remove the subframe whilst keeping the engine in? I think the answer is yes but just wanted to confirm. Thanks

Right I am after a little bit of help with choosing a manual steering rack for my 182. Laxy bought a clio dci rack and this was his He said he had 2 turns lock to lock with this rack. I am after the same rack but the racks on Ebay look different as they could be from a newer model...

What i want to know is if i remove the PAS piping and fluid with the Pump and the Steering Rack still be ok. With no Lube with they sh*t them selfs and seize? I will be getting a proper manual rack and removing the pump soon but not just yet. Hope somone can shed some light :)

I saw a white Ph1 172 parked in the Watermead pub at 5ish this morning 24/08/2010 It had Black OZ F1's Looked quite nice, is it anybody from here?

Just spotted this video on youtube, one of the worst crashes at the Schwedenkreuz corner (i think thats the corner) The guy is ok which is the main thing but poor car :dapprove: Another harsh reminder to the fact that the Nurburgring should be respected.

My 182 is on ITB's & has been running fine, then a few days ago when i was not in my old man started to fart around with my car and started it a few times to show his friends. Now it wont start, Everything is priming and clicking as it should do and it turns over well & the battery is fully...

Can i use a Kenlow "blower" fan rather then a "sucker"? I am right in thinking that the fan only really kicks in when statinary so having a blowing fan mounted on the engine side of the radiator should be fine? Thanks

I'm just after a bit of information on them really. I'm going to be running one of these raidators http://www.adrad.co.uk/redesign/prices.php?search=se310 Tony and Jay run one on their race car What are people running? one 10", one 12" or two 6" What makes are best but not too expensive...

I'll keep this short but sweet. So as some of you may know i went to the nurburgring on the 23rd for a lads holdiday. I stickered up the car for a laugh Note how nice the front left looks before the trip lol So a few mates came to mine the day before we set off. (mine was parked...

Well i havnt posted pictures in this section for aaaaaages so i thought i'd put some recent ones in. I'm off to Germany Friday for 5 days beasting laps round the Ring. I got a load of race car stickers to slap on for the Trip. Was done just as a laught but i do quite like them lol...

Is there anything else you need by law to have inside your car? I know you need a hazzard lights switch, a way to demist your windscreen and a set of speedo dials. Is there anything else you need to have so if i get pulled over and mr plod says that cant be legal i can say well actually it...

As above really, what engine mount is this clio running? Engine doesnt move at all and it doesnt have the mount in the usuall place? And in the pictures in K-tecs blog. http://www.k-tecracing.com/news.asp

It was driving along the A41 towards Bicester just about to go on that really long bit of road after the little bit of duel carrage way. I miss my clio :(

Does anybody know whats the max camber you can get with just AST topmounts? Its about time i got my suspension set up and want to know if i set the topmount to max then what tow should have? I know its personal preference as some people like lots and some (fred) only likes a little bit :)...

My washer fluid bottle is too big as i'm running my loom inside the bulkhead. Is there a smaller washer fulid bottle from another car what i can use? 1/2 size or smaller

I've done a search and just cant find out where people got their heated windscreens for their track cars. Google is usless too. So where did you guys get the heated front screens?

Hi, basically after a bit of loom chopping i found out that my high level brake light doesnt work. Can i just connect the wires from the high level brake light to the wires of the rear left brake light. Should that work? Hope someone can help :) Chris p.s the fueses are fine and i think...

Well as we have all graduated in my flat and soon moving back home we decided to wash the cars and have a few snappies. Sorry for the large pics :)

Roll Cage Padding...Talk to me! What padding do you use on your cages? Any of this stuff ok? http://shop.ebay.co.uk/?_from=R40&_trksid=p3907.m570.l1313&_nkw=roll+cage+padding&_sacat=See-All-Categories Do you just put it on the parts your head could hit or on the parts all your body could...

Right i'm not really sure if anyone can do this but i'd like to see if someone could photoshop my cam cover, cambelt cover/engine mount and the bit behind it all in black, grey & silver. If possiable, if it can be done then could someone PS my jenvey inlet mani in bright orange too. Thanks :)

I am just after a bit of infomation on how to remove my windscreen without smashing it or cracking it. I dont want to damage or crack the windscreen when welding in the Gussets on the A-Pillers. Can i just use a stanly knife or are there any other tips on tools to get it out? Can i use...

This little strip of metal is quite annoying and i want to know if i can get rid of it as i'm having a full weld in cage. How can i get it off? Do you sort of drill the spot welds a little bit with a big drill piece?

Right, cutting a long story short, i have a bad connection in the end of the omex loom which goes into the ECU. I recon its because the AA man a while ago just pulled the connector off the ecu by pulling on the wires and not pulling the clip :S. I had my car running and by moving the wires...

I'm basically after any information or pictures of anyone who has cut a section out of the rear bumper so it no longer acts as a pararshoot ( < cant spell it) I've seen lots of 106's and saxo's do it to their rear bumpers. Has anyone done it to their 172/182 Thanks