Search results

I have a Mocal 13 row Oil cooler which i bought off a guy on here. It came with rubber hoses. Is there going to be any differences between the rubber hoses and the metal braided hoses? Also does anyone know where i could get the braided hoses from, I tryed emailing a guy on ebay who sells the...

After taking my dash out the other week i noticed that the steering coloum is held in by a few bolts. I was wandering if there would be any issues with getting some longer bolts, washers and nuts and lowering the steering coloum by about 20mm? Hope someone can help :) Thanks

I changed my discs the other day, and my right Brembo Max disc has lost all its grooves! I run carbone lorraine RC5 pads but the discs lasted 20months and these have lasted a week. The left had side is fine and still looks brand new, but i never had any squirming under breaking, as if one...

I was on a bus :rolleyes: and you were in front of it and turned off leeds road i think near a dry cleaners Had a bit of a saggy exhaust :rasp:

Just though i'd post two pics of my mates newly powdercoated wheels. He took them to CAS powdercoatings in bradford and paid £15 each for a 15" wheel (£1 per Inch) The quality is very very good and i'm really impressed with the quality of the wheels so i'm going to take my wheels to them next...

I think you had the same exhaust as me, a K-tec Ultra-Performance. I couldnt resist overtaking you on that straight bit of road lol I was in the silver 182 with the orange wing mirrors and wheels :)

I cant decide weather to paint my roll cage in a bright colour with a black interiour or just have it all black! What are peoples thoughts? It is a proper cage and not just a show cage so as its quite expensive i'd like it to sort of stand out but a few people have said having it bright...

I was waiting for the bus in the pooring rain on Tuesday and a silver 172 with black wheels and sounded like an aftermarket exhuast drove past the uni at about 5:30 i think. I saw a CS sticker on the bottom left hand side of the rear window so i assum its someone off here? :)

I'm ordering my roll cage tomorrow :) and basically want to know wheres the best place to get Gussets from? For people that have fitted them do you need to take the front screen out to do the ones on the A-Pillar?

Hi guys, I'm 99% sure this is the right way to mount the gearbox mount. Please tell me where i am going wrong as the part in the second picture rattles around when its all done up tight. Obviously the bolts go in the side but i just laid it out as i had put it on the car...

Lots of threads of people doing 0-60 in just over 10 seconds so i thought i'd have a go and try beat it ;) jOKauu76u7Q

I'm sure i've seen it on here, I gave you the thumbs up lol :)

Has anybody used the GGG R888's? Am i right in thinking it goes Medium - GG Soft - SG Super Soft - GGG Bz2_fqxYs_o&feature=related

Just a video i made to hear the ITB's. I used a point and shoot camera attached to a suction mount just above my towing hook. Anyway... WV3pgCu2Yqg Comments welcome

Gave the car a little wash today and also my mate washed his jap cr*p. Took loads of picture but here are some of the better ones. Comments welcome :) Sorry for the immense amount of pictures :)

Saw you driving at about 4:00 on Leeds Road. Was a Red 197 looked like it was on coilovers, black wheels, small front numberplate. I'm sure its a guy on here.

I took these off my steering wheel today to tidy it up a little as you could see the wires inside my new wheel boss. Anyway my ABS light is now on and it doesnt work (locked up the wheels) Any help would be great :)

Dont think this has been posted because the video isnt really that good. But look at what happens to the guy at 43 seconds :eek: 2Pb5AoLlj8E Must be the mounting points that snap, his seat comes off too. Very lucky guy.

Apart from the carbon firbre door card sheets are there any other cheaper alternatives that people have used. I've noticed Bazzon/Barron have just black door cards. Would this sort of stuff be ok. Seems cheap enough and big enough...

Hia guys & girls, So what i want to know is what componet does the yellow 5amp fues look after? I wander if the component has been fried as the 5amp fues was changed to a 15amp fues by someone (not me). So if there was a surge from me stalling the car and 10 amps went through, then the...

I started my 182 had it running for bout 5-10 minutes and when i went to pull out of my parking space i stalled it as i was pulling away in 2nd because of the snow. Went to start it and the lights all come on, then went off. Went to start it and it just sort of turned over 0.5 of a turn and it...

Hia I just wanted to know if i can take the main engine mount and the upper gearbox mount off at the same time and leave the engine on some blocks of wood whilst my new engine mounts come. I'm hopefully doing a swap with standard mounts with the k-tec ones Thanks Chris

I suspect there is no way of curing this problem. As i have no interiour in my car my roof keeps getting so wet and its really quite annoying as it drips on my face. I keep forgetting to bring a towel to the car when i drive it. Is there anything i can do apart from putting the headlining...

I'm having a bit of a blond day today and cant work out if my ITB'd 182 will pass its MOT on emmisions when i bash the cat back in? It passed last Feb when it was standard but now its mapped with to the ITB's so will it pass? :S

I run Carbone Lorraine Front pads (RC5) and i have some cheapest of cheap rear pads. I know the rear brakes dont really do that much but if i put some CL's in the back will it improve the braking blalance or performance? The question is baised on the car been on track. What pads do people...

As you can see from the picture the plastic fan is touching the sausage filter. Can i run a smaller more powerfull fan so it wont touch the filter. I will eventually get a smaller rad to do with the fan but for now i just wanted to no if it can be done this way. Where can you get smaller...

So i've been having a think about trying stiffen up the standard mounts. Can you fill the engine mount with some stiff silicon? I'm sure i saw somthing ages ago that someone on here did it but cant remember who it was. So the silicon would still allow the engine to move but not as much...

Finished fitting my ITB's tonight and started her up and the Coolant Temp Sensor is leaking. I drilled the hole and tryed tapping it but didnt really do it that well. It stays in the hole but i need somthing to seal around the edges of the sensor. Any ideas? Here are 2 pics to help show...

I've been a very busy boy over the last two days. Just finishing off putting my ITB's on :) BUT Where does this go? Does is need soldering to these? Where does this go? I assume its somthing to do with the idle but cant see where it could go Whats this sensor for? Do i...

The OMEX Coolant Temp Sensor has an M12 x 1.5 thread So what size hole do i drill so i can tap the thread, M10 or M12. Thanks Chris