Search results

i'm still using my 4s since release, it's been faultless but i'll but upgrading to the 6 when it comes out. The 4s screen is perfect imo so i hope it's around the same size

ph1 and early ph2 plus the cup all use the gearbox to get their speed. The rest use the abs to to get the speed.

i'll check my psi tomorrow see what i've got. i've not really pushed hard with these rs3 as the sidewalls are just so soft i don't really want to destroy them, only covered about 300 miles with them.

what tyre pressure should i put in these? i'm finding in this heat the sidewalls are way to soft, cooler temperature and the grip is pretty good considering how much they cost.

ah thats good to know, i thought any amount and it could damage it but thats good to know that for the future. I'm no mechanic, i've just learnt everything from on here and getting stuck in (making a lot of mistakes).

88 2nd guess.

http://www.cliosport.net/forum/showthread.php?751283-Dropping-Subframe-for-box-removal this thread might help you a bit, have a quick read through that. Whatever you do don't drop the subframe whilst the rack is still bolted up.

324

cheers mate will get a bit of tubing and use that then.

looks like they've taken a s**t in the coolant bottle

can i use a long bit of tubing or do i have to use a breather pipe if so where can i get one from?

refitted my box today, took me about 3 1/2 to 4 hours on my driveway. I'm no mechanic either i just learn as i go along.

Yep you're right, m7x16mm. Uncle sorted me out with one last night

not sure if it can do any damage but i used a pair a mole grips and a rag on the shock then 21mm deep socket plus my bar and got it off straight away. Only done it the once this way so i'm not sure if it can do any damage or not.

i use a 13mm deep socket instead of a spanner, fits in just fine for me. Time for me to put my box back on the car for the third time (due to me being stupid)

i wouldn't chance it if i was you, i'd just undo the 16mm bolt (through the back of the subframe) and the 13mm nut on both sides.

i do the steering rack before i even undo any of the subframe bolts. undo it a bit more, when you can see about 1cm or 2 of thread that should be enough to slide the box out

if you've undone the steering rack just undo the 18mm and the 16mm but leave enough thread in there to keep it up on that side. only need to drop it a few cm's and it'll come out no problem.

hopefully getting one made for me on monday hopefully, i've also ordered one that is 25mm long so i'll just cut that one down now. What i did find is that m7 x 16mm is commonly used on a vespa bike. Hopefully all will be sorted soon!

cannot find one anywhere at all, can you not buy these separate anywhere?

anyone know where i can get one from, cannot find one anywhere?

cheers for the offer mate but i'm in south wales near cardiff, just measured it at 15mm long. 11mm head plus washer and m6 thread i think is right though.

i've emailed them but no response yet,

missing a bolt on my clutch it's a valeo one, anyone know what size they are?

looked at them but different size, ktec ones go from m12x1.5-1.25 and the pure motorpsort ones are just 1.5

quality of them aren't the best, after a week or 2 on the car they look s**t and start to flake. I've found the same ones but with a 19mm instead of 17mm on ebay but no doubt the quality will be the same.

i've managed to round one of the nuts off, anyone know where i can get another set (just the nuts) that'll work fine? not sure on what size i'll need so if anyone knows or a link to some that'll be great this is the kit i got http://www.k-tecracing.com/show_product.asp?id=4784&appid=2

i've just got a quote with aviva for 1400 which i'm pretty happy with tbh, but like above they all basically ask if you're 25+

was looking at getting a van but the cheapest quote i got was £2100, are vans really that expensive to insure? i'm 22 with 1 Year NCB (i have 3 but in use on another policy) anyone able recommend some van insurance companies?

no idea whats wrong but it makes this noise every time i engage the clutch, looks like i have to sell it now as well :dapprove: