Search results

So do mine, i think i need to get one of these too, very annoying especially when at traffic lights and i can't help but notice it! :rasp:

Well i know that... ;) but you replied with that after the last post was about making the car lighter so i was confused :approve:

I'm lost :p. What does? Magic Tree?

Head over to AutoPaint St Helens with your paint code and so on. I've used it a couple of times with different cars and its been a spot on match! http://auto-paint.co.uk/carpaint/index.php?act=viewProd&productId=21

Maybe it is this. when looking at the car the right wheel is not perfectly straight. I think this is due to an accident it had before i got the car. oh. can't be doing with replacing them all the time if it is going to be doing this, i wouldn't mind if i could change them myself as they arn't...

I had both rear wheel bearings replaced by a local garage in the middle of August. A couple of weeks ago the sound returned which made me believe it was the front bearing that was going after only just having the rear ones done. I took it to a different garage as they quoted a cheaper price for...

Ended up spending more than i planned! Alpine CDE-113BT AUX, USB Bluetooth Stalk Compatable iPod ready Bought the ipod cable off ebay, not that i will use it but i might aswel + bought the stalk adaptor too. :D

I've had a good search around, it seems the Alpine units work fine with an additional adaptor for the stalk controls. My budget is quite low £100 - £120MAX. I've seen a couple of Alpines i can pick up for in this price range with USB/AUX/Stalk thing but i also wouldn't mind a bluetooth...

Looking at the rokkor ones on ebay, are they any good? (i'll do a search on here with them too) I want to go lowww so think this is the best way to go. Its a 2004 1.2 16v and from what i can gather its the 58mm ones needed. Roughly how much would it cost for them to be fitted at a garage...

Well my first question is, why on earth do my headlights adjust pretty much all the time? I can hear them when im stationary and see them going up and down, this is both in auto headlights and manual. Also, nothing much of a problem but it's really annoying when auto headlights are on and you...

confused..what car is it actually for?

Will keep my eye on it but this morning I noticed the rev counter was higher than normal from start up until it eventually went down to just under 10k http://www.youtube.com/watch?v=UCCVhGQIjHA Anything to worry about?

Edit, I see now. never mind lol.

how much did you pay for colour coding, looks a good match!

Didn't take in any of the numbers that was on the machine, they were using one of the digital ones for it. He could sort the fronts but didn't want it to feel worse after so i said leave it for now. I will look into the shims and ask about it. Will also probably get the drop link sorted by...

Took my car in this morning for the tracking doing to get my wheel straight as it was annoying me. The guy got me to come and look at the car and said the back wheels are out a bit too and if the front wheels were straight it could possibly cause more problems and there were other things that...

I have done some searches on this and have been getting some mixed results all in all. CV joint, suspension and other things. Basically i started noticing this when turning around on my street, i would sometimes get a clunk when in full lock. Not bothered me and i have left it. However...

Changed the seats over from the standard seats to some 172 seats. Everything went fine, disconnected the battery reconnected everything what was available and no airbag light on which is the main thing i am happy with. However, with the new seats there where no connections for the gray clip...

thought it was funny when I saw it, my first cliosport.net spot lol. P

thanks for that, Will try my best to be careful with it lol. Now need to find out how to remove the seat covers. Have some 172 seats to put in but the clips are broke what holds the seatbelt and the seats currently in are fine. Saw a thread on here where some guys had swapped the covers over so...

Called at Wilco Motosave just down the road from me for a set the same as the one you linked to. 6.99 so was quite happy. Not tried it yet as its pouring it down but it should be straight forward from here thanks! They all seem pretty tight, the ISOfix bolt on one side actually snapped off!

The star'ish fixing that secures the back seats to the car is so tight i just can't turn it. I don't know what to use to get it out, i was very slightly getting it with an screwdriver that had an angled handle but it was so tight it just broke. The tip i have is one that goes into universal...

Bought some black rear seatbelts and just thought nothing of them when i got them, they have the pretensioner on them and a little wire. Presuming this has something to do with higher spec models such the 1*2 etc.. Anyway i went to have a look at changing them over in my 1.2 and see that the...

Got the odd light scratches around the car that are just lacquer damage and swirl marks and fancy giving it a good polish for the first clean and then keep on top of it as needed. Going to use megs scratch-x by hand for some of them and also have some swirl-x however machine polishers are quite...

Got the door strips to sort out, see my thread about the lacquer, i need to put some more on to give it the shiny look but don't know if i should sand at all first or just spray it over as it is, they have been sat since i first lacquered them two weeks ago. STILL waiting for the 172 rear seats...

Did my first time spraying the week before last on my door strips, done a decent job however I did not get the lacquer right, it needs another good wet coat or two to make it thick and glossy, it hasn't been touched since I did them and they have been sat in the garage for nearly two weeks. What...

Got it sorted, £100 for both rear sides, not too bad i suppose, its great being quiet again!

and the passenger door doesn't open? :p

both rear ones aparantly but the sound totally goes when turning left. Ive been quoted £120 for them replacing? I take it these are not an easy part to replace, will be talking to my grandad later on who sorts out lorry engines and the likes so maybe he has the gear available. Two parts though...

Going to the garage tomorrow to have it looked at and a general look around the car to see if there are any potential problems but i know one of the bearings are going, its really loud and some places are quoting £80+ to sort it. Just so i know how can i tell which wheel it is so i can check...