Search results

There quite a lot bluer than my HID's TBH. But they look so much better than yellow halogen sidelights. Depends what you want really, most people on here just take out there sidelights.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=130102074928 I've got the ones in the link above. The give off a bluey light, or you can just take out the sidelights completely if you want.

6000k They look ice white in my projectors, there's not really much blue in them.

Yep HB3 What colour you going for? 6000k or 8000k

Dual Optic Conversion is really easy buddy. The only thing the guide doesn't tell you is that you need very small female connectors, which are used for the smaller connector on a speaker. Everything you need can be bought from Halfords. Yeah a set of Ph2 lights is definitely on the list, they...

There's a guide on it :S

Well I've owned this for about 8 Months now and I've done a few subtle things to it: These are: 15" BBS Exclusive Alloys Dual Optics - with 6000k HID's :) 172 Rear Spoiler Silvervisions Clear side repeaters Smaller Front Plate Things to come: Colour Coding Lowering Springs (possibly) First...

My W Reg Grande has got 34.5k

Another for Alpine here. They look great and sound great - well my X300 does anyways :)

You need this one :) http://cgi.ebay.co.uk/HID-XENON-CONVERSION-KIT-BULBS-BALLASTS-9005-6000K-NEW_W0QQitemZ350191581804QQihZ022QQcategoryZ9895QQtcZphotoQQcmdZViewItem

I had this on mine and it ended up being the lower ball end joint. If I was you I would check this for any movement.

Why has he fitted Phase 1 lights? lool

Why don't you try these? http://cgi.ebay.co.uk/2-x-10-LED-White-HID-Fog-Light-Bulbs-Auto-H4-DC-12V_W0QQitemZ280327687225QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item280327687225&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A1318 Not sure if they're legal

That may explain why :nono: Just get HID's if you've got projectors

Mine's the same colour as yours and that pics just made me want to get it colour coded. I'd go for it, but I would try and get some better alloys, if I was you TBH.

I would use a relay connector thingy if it was 80 watts. I would run about 55-60 watts through the original wires IMHO

They sit at 4000 RPM at 80

I used 350 dry first on mine, this basically gets rid of the top layer and gives you fresh plastic. Then I used wet sanding grades 1000-1500 and finally polished it with my Rotary with Megs #83 and #80. After that they came up like new :) By the way, it's really hard to muck up.

Another Update: It was the lower end ball joint and it's now fine.

Update: I've just taken it too the garage and he reckons its the ball joint. I'll post up if it is this.

Hi all, My Clio's been making a very annoying knocking noise. This only happens after I've been driving about 30mins though. It seems to be coming from the right hand side (drivers). It only seems to make the noise when I'm pulling away in gear 1 and only when I turn my steering wheel at low...

I'm getting a knocking when I drive off from stationery. It sounds like its coming from the drivers side. Would this be purely down to the engine mounts or could this be the gearbox mount? By the way my car is a Mk2 Ph1 1.2 8v :)

Some real nice cars in here I'll put some pictures up of mine, once my Exclusive alloys come :)

This happened to my car and the battery was on its way out. The lights all came on and the windows went up and down. But it wouldn't turn over. Just change the battery or get a jump start.

^ Pretty much

Looks really nice mate. I always want a PH1 when I see one on here lool

I've had the exact same problems. Also I take it that you fitted the cage that came with your Alpine. For the first month I had my x300 I used the standard Renault cage and that never helped.

Slightly off topic - but does anyone have a blaupunkt DAB radio attachment or know if they're any good?

I found it easier to pull the gromet out of the firewall and to put it through the gap. You can do this by pulling it with a pair of pliers.

Why? That looks so s**t. Why didn't you just get a new exhaust made up?