Search results

The 2005/2006 megane Scenic with the 1.6 16v engine. I was a little disappointed to find that my Renault tools didn't fit this engine! the Crank Pin was too short and the cam locking tool didn't bolt into the cams as it does on the clio, Lucky i had a long pin from a Franklin kit, and my mate...

Now then lads. I have a phase 1 172, The car has the uprated koni adjustable shockers fitted, and i was told lowering springs! I dont think there lowering springs but 4x4 units. lol Can any one sugest what to take the edge of them massive gaps? I will get some decent coil overs but at the...

clio 172 Cup Friday in the Gateshead felling bypass, i was pissing my self laughing at the pops and bangs ;) K tec racing silver stickers down the side, What exhaust do u have fitted??

Dont you love when your car kicks you in ya balls then spits them back out!!! I had a incodent at Bedford with my sloppy gear change, i thoght the engine had slipped the belt, im sure the bottom and top were turning!!! never the less i ripped the car to bits and the car seemed ok, i...

TITLE SHOULD RED CARBON NOT CARDON LOL OPPS ive been told that there are carbon door covers avilable for the clio.......... the one from the top of the door too the bottom runs witht he rear 1/4 window..... http://memimage.cardomain.com/ride_images/1/2435/881/6085440002_large.jpg...

Hi Guys. Im looking at k TEC stelth unit, decatted of couse, its a 2.5" bore thats fine. But what are these liek at flowing? i.e cn cars make decent power with one or are they restrictive etc Andy

Hi Chaps! I have fitted my phase 2 bumper on the phase 1 172 but i seem too have a issue! The bolt holes up the top of the bumper that go into the boot s**t dont line up at all?? Can any one help? Its just helde din with 2 x 10mm one either side Andy

Spliters. Phase 1 172. Whats cool and whats Gash? I hate the DTM ones u see on ebay. Any options and photos of them fitted Andy

Well after the sale of the Yellow Rocket Shell too a lad on Clio 16valver i Had to just start my project thread. After looking for over a year for a decent clio 172 shell with out paying stupid money i found a one with a snapped belt. from Budgie on here. I collected the Shell on Sunday...

Hi Guys Bucket seats and fitment in the clio, So we have any photos. In my mk1 16v i had to weld a box section to lift the seat up as i was far too low. Can those who have them drop some photos on here please Andy

cat back, whats 2.5" and not loud!!! i need a off the shelf exhaust system that does this i do croft of a track days and need to be around 88dbs for a 172 clio cheers

Rocker Covers. How do people paint these?? or powder coat them?? As i want too do mine but dont want too take the risk of nacking the cam bearings. Any help

Mocal Oil cooler with a theromstatical Control. i know how to fit this thats not a issue it was the oil sid eof things i wonderd what too do, i assume the cooler will open up at a certain degrees and let oil via the cooler, Thing is i know ill have to top the oil up also, but what do i do...

Really need some help guys!! I have a Compaq presacrio cq70 laptop it was running windows vista, after a year and a half i decided i needed a full format and reinstall of windows XP ( i hate visa and 7 ) Any ways its churns its way via the intsall screen untill i get too the "set up is...

Looking for some new front disks, I run a Clio 172 Disk up front. What are people using i use a Ds2500 Pad and the car is used for track Any suggestions???

Hi Guys. After Mallory Parks Track day we were so unhappy with the handling of the car, it felt twitchy and unstable, Speedy drove it and came to the same conclusion. So We decided that the first Crofy Track day was on at the wekeend so we got a place its a "quite" sessions 8 x 15min...

Clio 200 At Croft Saturday Twingo At Croft Megane R26R croft How way lads whos are you i have some nie photos

I know its not CLIO related but its how we got our Track Car too Track Days.... My Recovery truck was Stolen on the Morning of the 9th July 2010 The Truck was Located at Crook In Durham, And was stolen between the Hours of 2am and 8.30am as People who have Garages nearby came...

After A year of messing around with NA engines and not really gaining much for the money put into the car i decided too see the Fully Forge Engine, I decided it was a "cheap " Toy and it got well out of hand. Im not the best driver in the world its a confidence thing from my Serious RTC in 2008...

Right boys, Fitted a k tech Mocal Coller kit to my 172 High Compressioned Engine. And a temp gauge, we went for a non thermostatical plate due too being told that was a better option. Were getting a roading of 40degrees when driving, when its stood still goes to 80degs, as soon as i...

Oil pressure and temp, were do you boys take them from please, i dont want to get a sandwich plate as i will be getting a oil cooler soon if i need parts then what ? Andy

thanks for helping lads. Great cs members cuming bak too c if i was ok. Got bak lads. New fan belt fitted.

What oil do people on here run. And i am after people with 200bhp plus please. And track use Andy

Hi Guys. After some advice. On hard right handers, i.e roundabouts and we throw the car into it quickly, the car suffers fuel surge. as soon as it is back on a straight line it goes well again, this is only when the car had 1/4 of a tank or less. if its full or half this doesnt happen...

Hi Guys. Clio 172 Mark 1 2000 Does any one here know the Pin location on the back of the Speedo Clocks, of the following Rev Counter Pin Speedo Pin Either colours of Wires or a Pin number would be great, Reason if your wondering is i have scrapped the 172 ECU and loom and...

What should the fuel pressure be on a clio 172 please mark 1 version.... And can yu please state if the pressure you give is with the vacume on or off

Hi Guys. Wipers just stopping were they want, Also if i put them on and try and turn off they go for 10 swoops before stopping, at any location, Ive changed the wiper motor? Any other things too look at

Selling my clio 16 powered by a ITB F4R Engine. Pleasee see the Piston Head Link, if thats ok with the CS Rules. If not Admin Pm me and ill re do :) Cheers http://www.pistonheads.com/classifieds/1030461.htm

I feel like a right bloody nugget asking this question but im fed up. Replaced the Head on the car at the weekend due to a inlet sucking the in a stone. I replaced head and replaced all seals... in te kit i had variosu gaskets and oil seals. 2 x Oil Seals with a smaller internal...

Ive been a busy bunny over the last year. Hope you like.............. I love the colour looks well on the mk 1 i think before my megane getting a look in and now