Search results

I have exactly the same problem with the grams inserts. It looks s**t !

Looks decent quality but worrying if they have changed who welds them as they aint cheap ! I will see how i get on with the milltek .

Anyone bought one of these, i know they are bloody expensive but looks nice. Assuming all is the same apart from the carbon base piece.

Currently have a miltek system with decat. I know the Yozza is always mentioned, Pure motorsport one any good ?

I need a set of front arches !

I remember this being a cnut with 2 hands but with 1and a Jeremy beadle it was tough. But like everything in life don't give up and follow your dreams 😂. All tucked up, still havent decided whether i'm going to fit this carbon unit from my red clio or go full asbo with a fatty system as...

Today's activities was to attempt to comnect the exhaust back up at the manifold with 1 working ✋. Even jacking a car up is a mare 1 handed ! Complete with Autodoc roofbox

Car was in garage and i was trying to look, my wrist is in a cast so not so mobile, im going to get a mate to crimp them.

Sorted can route where bonnet cable went

Is there a route to the batrery from steering column without have do drill a new access hole ?

Trying to build the interior up so its abit more bearable over winter to drive but missing alot ! In need of an interior carpet and the plastic trim that runs along the skirts. Might have to visit scrapyard. Door trims all fitted. Rear doorcards half fitted, need to find bolts for them but...

Managed to sort the central locking issue out today, abit of contact cleaner on the plug and clean. Also sorted the window as it wasnt fully closing to the top of the seal. Doorcard coming back off to investigate lock and wondow issue. I was going to sort the exhaust out as its currently not...

Electric window sorted, i hadn't plugged it back into the window motor 🤣. Started fitting the window rubbers back into the door frame then had to pack up.

Put away to sleep until tomorrow. Need to install the rubbers on passenger door and find out why electric window is not operating on passenger side. Also fitted fuel rail protection and replaced some of the pink bolts 😂

Slam panel fitted in place and bolted up 😊 Need the plastic bits which plug into the grill and slam panel. Anyone know the part number ?

Spent afew hours on the clio today. First job remove the radiator which doesnt quite fit with the slam panel as i found out. I went for valeo unit, think this is what are fitted from the factory. Hopefully slam panel fits in place now without fouling the radistor.

Attempted to do abit today with my right hand out of action due to a broken wrist ! First job was replace the radiator as the one i fitted was slightly to tall so i purchased an oem one. Slam panel should fit in place now without fouling the radiator 😎

It has been parked up in garage for a while

Yeah i will have to see if anyone has a carpet here or go scrapyard for one. Assuming a cup one is thinner than standard

Any ideas ? Not sure if its because ive mixed looms or uch kit or a fault that's occured. Noticed this lastnight when putting car in garage

Also do people think fitting interior carpet will help reduce abit of noise and look abit neater inside 🤔. This is meant to be my fast road / occasional trackday clio since i have the red one.

Fitted the oem door cards for now as i plan to use this abit over winter and be semi practical 🙃. Drivers side done, need to see why its not locking on the key fob, cant hear it engaging lock so will check im getting signal at the door. Passenger side, it was getting dark so packaway time.

Managed to finish putting the doors back together now i had the white clios for the honeycomb window guide. Also found the insert for the side of doors as couldnt remember but luckily i bagged all the door fixings.

Going to be putting my white clio on the road soon and covering some miles and maybe get a trackday in. Been reading on here about soft sidwall flex and going semi slick route like ns2r , ar1's or advans. Whats people's thoughts and looks like a 195/50r15 is what i need. It won't be used...

Thankyou, will have to see if i still have them in a bag

Anyone tell me what and where i can get the part for here ? Was it like a plastic insert ? No idea now what they were and if i still have them 🙈

How much are they direct?

What et are your 2118's and what tyre combo. Going to have to order mine shortly as i plan to use mine over winter

Been a while, life and work got in the way as usual but going to get this finished and on the road over winter as the S2000 will be tucked away so good opportunity to get some miles done in this and some winter trackdays. Rear Cup windows installed so hopefully car will be water tight so i can...

Also borrowed one of the sabelt seats from my white build for now. Still not decided on a seat for this yet , possibly a full wrap around or something similar l.