Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I'm thinking the Lambda setup is the same as on the Clio's. I run an Innovate LC-2 wideband on my project car.
The stock ECU reads the narrowband o2 sensor using the generic '4 wire' lambda. White/White/Black/Grey wires. I know the signal wire is the black wire.
What I don't know, is which...
I went to a car show recently and saw a 106 turbo with a charge cooler installed. Since then, I've been reading some threads and they are plenty used. I didn't think it was the 'done' thing.
I've never considered it before, in my small boosted project. But I think manufacturers are using...
Yup. Today's society.
Eybrows, t(ts, car, clothes, TV, phone, cocktails - all on some form of credit.
Everything through an instragram filter, easily sold because others have it.
Welcome to 2018.
My daily hack/nail was making some cracking and clunking noises when turning, from the passenger side. I ordered a 'shaft' from Renparts.
Thats the 'new' shaft on the left. The abs ring looks too small and so do the splines. I obviously couldn't check this until my shaft was off.
True...
https://www.ebay.co.uk/itm/Renault-Espace-Jet-Car/192530370441?_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D50546%26meid%3Dcf690eefb0964ff9bfee1d7ddc327dc2%26pid%3D100009%26rk%3D1%26rkt%3D2%26sd%3D123148192438%26itm%3D192530370441&_trksid=p2047675.c100009.m1982#viTabs_0
I was...
Following on from my previous thread regarding the back boxes.... this time it's the cat/de-cat.
I'd like to put a cat back in the car. Currently it has a decat as below.
It's crap and blows as good as our lass.
There is a sale/voucher code for Euro car parts (no suprise) that shows I can get...
Erm... I've inspected the exhaust on a project I bought a while ago, it's a reet mess.
It's some powerflow thing, I think. The welding isn't great, so guessing it's not an off the shelf item. Anyway, WTF should the hangers look like at the rear, as this is proper blue peter:
It's day 2 of the sale and so far, I don't think much to facebook market place/groups. It is a licence to waste time and a messaging system for dreamers! Think I'm going to pull the ad from them.
These are genuine messages received in the last 48 hours:
"Sell the cobb separate m8 - you'll get...
About to be back in a 182. What has happened to my life.
Anyway, my MPS if it tickles any ones fancy.
https://www.ebay.co.uk/itm/173278427117?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Hoping someone can help explain clutch covers.
On another project I have a 4 paddle Helix clutch. It came with a Helix clutch cover, which looks very similar to a stock/oem clutch cover, but has their sticker on it.
At full boost - the clutch slips a little.
There isn't a direct upgraded clutch...
Have you gapped the plugs? I had a misfire under load on the Focus ST & Vectra after cranking up the boost. It was blowing plugs out. Had to gap them down.
I've noted about 3 things (gauges mainly) using scotch locks from the cigarette lighter wire!
Sad thing is, I need to add other things into a similar feed, but want to do it correctly.
What is the best way to either share 1 connection with 3 devices safely? do I have to run individual feeds...