Search results

Here's a old thread. http://www.cliosport.net/forum/showthread.php?719351-Clio-Cup-On-Corner-Weights&highlight=Corner+weight

Hi Daniel have tx'd you also but as pics are on here i've also put it here. For ease it's a 2man job you'll struggle on your own. Ok so looking at the 1st pic properly (feet position) your almost there what you need to do is use a ratchet strap and pull the feet together towards the middle of...

If a torx can undo it have you tried using a very small straight electrical screwdriver? It won't be done up tight so should work a treat.

The steering wheel is a torx55 and then the scuib/indicator stalks are torx 15/20 from memory.

Your not the only one dude, i did tell a few that i was recording the overtaking parts and waiting for everyone to go past i guest i expected others to mention to others in conversation. I'm sure there will be another time so will equip with more cameras and have massive recording sign made up ;)

Never use the sills or enless you want to have a rotten sill from the seams coming apart, i allways use the trianglar brace plates to the front on the nuts to stop it from slipping.

A quick video of the meet guys. http://youtu.be/WGCuB0UDQH4

^^^^ cheers dude Its ok about pics now guys, i've copied some of the above to my laptop.

If people send me pics of the cars whilst being parked up to madm4x1@hotmail.com i'll add them into the video. Thanks

Can people write what websites this meet was posted to, I'm in process of editing a video and want to name forums at the end credits.

Had a good day thanks guys, have checked the video footage and it came out good apart from the go pro could have been angled up more to hide my speedo so will look into my video editing software and get that part pixalated/blured. Was nice to meet some members and of cause put faces to names...

I'll be coming just having a shower and ready to set off, i'll be coming on a bike though. See you there guys.

Here's my no 07855806683 I've had plenty of experience fitting these cages (have taken mine in/out 30odd times) give me a ring it would be easier to explain.

Like this you mean mistercorn?, I've always wondered what these look like fitted and if they're any good. http://www.demon-tweeks.co.uk/motorsport/ducts-ducting-hose/demon-tweeks-alloy-brake-disc-duct

You'd probably find it's the one in the front/center by the heater fan. If you feel around the bulkhead near the right hand side of the exhaust you'll find a rubber tube, another forum member was having this problem untill i located it. Because the the pipe was blocked the water was gathering...

Use skateboard grip tape i have and it worked a treat on a uneven floor (with a heat gun) 2 lengths side by side and the floor well is covered here's a pic of mine before i removed the support bar and fully stripped it again.

Looks great Russ. And yes the genuine brake ducts are shocking the passenger side (at the tip) is about 5/10mm shorter than the drivers side. Just like you i didn't like how they fitted and extended it to make it the same length so it looked the same as the drivers.

Hammer a slighly smaller socket over and use that to get it off, that's how i've done it in the past but it depends on what style locking nut though.

Wtf! Don't the navy use that kinda camo design on the ships iirc?

I'd assume you could just get the area done but then the finished look at the edes might not be the best, personally i'd speak to a flocking company and explain to them, they can point you in the right direction.

That's quality :)

Exactly what rob said in above post. Good choice on a mint 325is, and welcome to the e30 club ;). Still wish i had my old 325is mtech2 was awesome for drifting :rasp:, just a bit of warning be careful it will bite. EDIT For a cheap winter car why don't you keep the e30 theme and look for a...

Renault sell them, think they are £12 for both iirc

All ready have a few tins of that ready :). ​Cheers guys.

My 04 182 clocks back last year shown 45k but when i fit the race technology dash it will be 0 :).

Happy days, does it matter if there formed or flat? Bought a kit from http://www.acwmotorsportplastics.co.uk/renault-clio-mk2-3dr.html

I've used the search bar but haven't been able to find the answer. I'm after some advice regarding fitting the rear quarter windows, I've placed them in the recess to see what's my best options for fitting (bolt/bond) but have noticed that towards the front door area its raised so if i was to...

Yeah i wasn't looking forward to it, imo its going to be more hassle than its worth tbh. ​

In all honesty i've got no idea if its kingy's old car or not it just turned up at the garage one day and my bro saying its his. It has a metallic black roof and rear spoiler if that's any help? Never heard of the Elia kit will look it up, but i know he wanted to stay away from the fibreglass...

Hi all It's my brothers car and as he's been watching chop shop lately he wanted to do something wide arch related for it. The car it self is a 1.6 16v and due to him having a bad history with his licence he can't afford the insurance for something with a big engine (has had 1.0/1.2/1.4 until...