Search results

Sounds awesome - pics!

Re: Steam Edit: I installed it off the disc, but how do i patch/update it lol.

Re: Steam Reading this has made me want to play CoH's again lol. Not played it since it first came out. Going to install it and join the Cliosport steam group too :) Have to see how I get on! Not very well to start with I'm imagining

Its quite a tricky question - standard ride height as measured from what?

iirc these people are highly recommended: http://www.paints4u.com/ I buy my primer / lacquer cans off Ebay, much cheaper if you need more than one can. Regarding the colour, someone might know of the top of their head, or you can check the colour code printed on the sticker inside the driver...

I used their Renault Black. It's a direct match. Erm, roughly one can a side iirc. Maybe an extra can to do a few extra coats on each side.

You can get genuine one's off Ktec: http://www.k-tecracing.com/show_product.asp?id=2495&appid=2 You can probably get them cheaper elsewhere, not sure about Renault, just put the Ktec one up as a rough guide price.. Or there is a cheaper alternative, with people using powerflex mounts...

Pritchard is infact on Apex. I PM'd him coz couldn't find the Spax ones I thought he was referring too. He doesn't seem to mind them.

The one you've linked is a standard gloss black. If you want it to look proper your better using the actual Renault Black (if your car is black) Sign up on here mate. Quite a few guides on doing it. I resprayed my bump strips on my old non sport - first time I'd ever resprayed anything and...

Thing is regardless of whether its a Halfords product, you'd need proof of purchase, or a statement, to prove its actually yours. Coz any old bod could find an old pressure washer that'd been dumped and try and swangle a new one out of it.

They do some AG Giftbags with sets in, like Shampoo, Polish, and a cloth etc.

Have you got your receipt for it? If so you should be able to take it into a Halfords for them to sort out. Unless It's a part that they can replace off the shelf, it'll have to be sent off to be repaired mind.

When you say door trim, what exactly are you referring too..

~3.5 Litre's if I remember correctly. Did it a long while ago!

Speak to the trader G 172 on here. He'll do you a set of standard equivalent Brembo Discs and Pads for a non sport at a good price.

You should be fine running without the rear adjuster, on the rubber cup I know quite a few people on here do that, because they wanted lower than they could go on the adjuster. But they would definitely have come with rear adjusters as new. They are blue as said.

I got this: http://www.ebay.co.uk/itm/LINT-REMOVER-CORDLESS-FABRIC-WOOL-BOBBLE-SHAVER-NEW-/370280010629?pt=UK_Clothing_ShoeCare_Shoe_Care_LE&hash=item5636689385#ht_500wt_922 Cheap and cheerful but it's alright.Takes a while mind dependant on how worn your seats are.

Could it be tracking or wheel alignment if its pulling to one side?

The Sport Skirts attach to the car using clip things that run along the length of the car. You can't just stick them on as such. Plus yea you need sport front wings for them to fit properly because they clip to them at the end at an angle. Edit: See diagram (courtesy of Jungle_Jim from another...

Lol this guy just seems to be talking to himself. None of his posts have related to any of the ones that have gone before it.

If it was a three door it'd be simple, but in a five door your going to have to work out a way of getting the wires from the door through the rubber door loom thing into the cabin. Also re. above. Halfords fitting for speakers is £49.99. And you'll probably find it hard to find a store...

Yea it will the deterioration of the pins on the bulb holder, that go into the plug. Could be the earth too. Its a common problem on Clio's If you get a new connector, or go to a scrapyard and cut a connector off a car down there, the wire colours will all match, so its just a case of matching...

As in your trying to slide the mirror onto the metal holder thing on the windscreen from the top, but the rain/light sensor is in the way so you can't slide it on?

The standard for the chunky standard 182 wheels is 205 I think. Some people put 195's on though. The 172 standard alloys standard size is 195 iirc.

They're just stickers I'm pretty sure you stick over the top of the brake light that blocks all the light except for the letters, to give that look. I know someone who had a 206 GTi one.

It will be down to that connector! First thing to try would be cleaning the connectors up. If you can't get the connector off at all, the only real option you've got is like Fred says, cut the connector off, chuck the whole bulb holder unit and plug, and wire in a new plug and new bulb holder.

The easiest place would probs be just to mount the tweeters in the door too, hide the crossover behind the doorcard. Then put the original speaker wire into the input for the crossover, and then chop the speaker wire at the headunit end, and divert to the amp.

You can just see mine in the Photo: I'm sure a proper ICE enthusiast would tell you you need to angle the tweeters towards you, but I couldn't be bothered to make custom pods, and wanted it to look factory.

I don't know about the best place, but I mounted them in the original location, then hid the crossovers under the seats, connected to an amp in the boot. I laid all new wiring though didn't use factory wires.

They just scream Halfords tbh mate! Tbh without lowering I think you'll struggle to find alloys that would look good.