Search results

Got mine all fitted: From what I've seen most cable ties there's to the bracket running along the side of the battery and onto the ECU, but I found if I did that the metal pipe would actually stop the bonnet from shutting properly! So I've cable tied it down onto a hole below the metal...

Stupid question here, removed my old airbox to fit my induction kit, and struggling to remove the cold air feed which goes down by the passengers side headlight Can I remove this without taking the bumper off? Tbf my ramair filter will fit on top of it if I lay it across, but then there's no...

Never really looked into the Carbone Lorraine's, I'll do some research into them - cheers

£125 from @George@RTR_Parts

Don't suppose you know what size?

Been meaning to get one of these for ages, so bought the bits today to give it a try... If I like it I'll probably get a silicone 90 degree elbow to use instead of the plastic one...any ideas what I'll need? @imprezaworks same as yours but in black, or purple if possible

Are they gonna squeal/squeak during road use?

Interesting, thanks both! Thought there might be a couple of things worth looking at Brake setup wise, be interested to know what you'd recommended for road use and track? Thinking Brembo HC Discs, Braided Lines, Decent Fluid, just unsure on the pads Don't really want anything which will...

Current Spec / Mods : Cup Suspension, Cooksport Springs, Michelin PS3's, Whiteline Rear ARB, Rear Axle Spacers, Hubcentric Front Spacers, Polybushed Dogbone & Upper Engine Mount What should I look at next? Thinking Solid Top Mounts...probably Pure Motorsport ones Car is used for fast road...

I'm sure I've said this before Dan, but this looks spot on Easily one of my favourite 182's, and has all the mods done that I want! Makes me quite jealous actually What makes it worse too I always wanted an Arctic....damn you

Plenty to update, but it's too nice to be sat inside on the computer, so here's a quick snap DSC_5608 1 by Jimbob_2705, on Flickr

Haha sorry buddy, couldn't resist On a more serious note the car looked smart, saw her just outside of Bath

Never seen that either, I only live up the road form Abergavenny and I'm popping down there this evening Where abouts was it? Might pop and have a look around!

Just seen your sister go past in this...not gunna lie she looks pretty fit

Out of interest what power is the DC2 pushing?

Cheers Lee, glad to hear it!

Ended up buying these yesterday: Need a good clean and a general tidy up, but I bought them at a half decent price so don't mind spending a bit of time on them Think I'm going to get the Airbage Module for my RS Tuner (so I can turn the side airbags off) rather than going down the resistor...

@Sss107 Top man thanks for that, the seats are now mine so I'll be ordering that kit to give it ago! Thanks again for your help!

Cheers Jon, just wanted an idea as I have no idea

Found some Recaro Trendlines I'm interested in, but they have a crack in the leather which the seller has ensured me that its not a rip Can just this section be retrimmed, or would it need to the whole seat? And any ideas what sort of cost? I know I'm better of asking some seat retrimmers...

Cheers buddy, few bits needed to get it all together and as tidy as I'd like, but mechanically it seems spot on (touch wood!) Just working out what I'm going to do next, I keep thinking of changing to something else but as soon as I get into the Clio my mind changes, and the fact I'm 19...

No major updates, but it had an MOT today Thought I better give it a quick clean as it was absolutely stinking! Photo 22-04-2016, 11 47 24 by Jimbob_2705, on Flickr Photo 22-04-2016, 12 27 51 by Jimbob_2705, on Flickr Photo 22-04-2016, 12 29 33 by Jimbob_2705, on Flickr Photo 22-04-2016...

4x 15" OZ F1's Original Renault ones Just been powdercoated so mint With centre caps How much should I be looking at paying? Mates got some which he might sell, and quite fancy some for the track

I'd say get the belts done, as you should see the majority of the money back from it if you did go to sell it anyway! 197 cams sounds a good idea since your getting them done, and hopefully you should be able to pick some up at a half decent price - I've always fancied 438's but it's not worth...

If it's perfectly smooth, I'll take it

How well does it match up to the aerial base? Quite a smooth transition or a big old step? @Davyy

What short aerial do people use? I tried a C2 one (I think it was) and the fit to the aerial base was terrible,

Thanks Joe, nothing stunning as it was pretty much point and shoot As you'll know Joe I was honestly thinking of changing for something else, as it wasn't quite 'scratching the itch' as they say, but after this trip out I've seriously changed my mind - it's really reignited a spark with it...

Thanks! They are, although currently they're out of stock : http://cooksport.co.uk/shop/product/springs/renaultsport-clio-172-182-cooksport-springs My advice would be to keep an eye on that regularly, as they do sell out quickly!

Went up to Elan Valley with a bunch of mates today : DSC_5549 by Jimbob_2705, on Flickr DSC_5542 by Jimbob_2705, on Flickr DSC_5506 by Jimbob_2705, on Flickr DSC_5552 by Jimbob_2705, on Flickr DSC_5511 by Jimbob_2705, on Flickr Any my favourite photo... DSC_5567-4 by Jimbob_2705, on...