Search results

Did a search and thought the solution was to clean the rear light clubsters of any rust. All connectors clean as a whistle, But sanded bulb bottoms lightly and cleaned the prongs. This hasnt solved the problem. Ive also read the earth can be bad? Where can i find this please? Or is there...

My door hinge clicks loudly when opening and closing. Did a search and read about loose bolts etc. Took the door card off and could see inside when i opened the door the 2 plastic barrels wernt moving when the joint was then clicking round with force at the end making the noise. Removed it...

http://vimeo.com/6972240 Enjoy :)

Had a few searches just in general. Want to top up / Check and ideally change my gear box oil. Is the first change over 75k? Im on 60K and gearbox feels fine however i seem to remeber it being a little better to change. Under the air box, The 5cm of thin tubing with a cap, Is this the...

Probably a repost? Had a search for the name, didnt get anything back. Great vid imo, The sounds <3. FOPia34XKAI

I made another thread and got some answers but i want to start again now and simplify things. I let my car run too low on petrol (im pretty sure this is where the problems have come from). The car missfires in revese and sometimes in 1st, And is hesitant when putting my foot to the floor...

Just dropped my dad off round the corner and on the way back it started juttering at low revs and when trying to accelerate. Not harsh but noticable and juttering everywhere. The car was on the petrol light, I thought it was only since ive got back from the gym but apparently my mums taken it...

XtB1fRT5nYg Might be of interest to some.

Just seen this, I did a quick search, But couldnt find nothing. Is from 2008 so im guessing a few have seen it, For those that havent though: Xa6_mO3NAO8 Made me laugh, "Do you want me to piss in my pants?"

Just popped a long to this earlier with my mate, Lots of bikes racing, Nice selection of cars etc. Just a few pics i took, Nothing fantastic but i though id post them up. Fairly good trip, Glad i went.

Hope this isnt a repost, Its published today on the youtube link. HQ7R_buZPSo

Im thinking of buying a identical door to mine off a member off here, But im wondering what would be involved in changing the door? Im buying the door because mine has a few small dents and and a small scratch so this should be slightly cheaper to do. Ive had the door cards off to dynamat...

Always have a pop into the mess and hell that is poundland to pick up some microfibres and bits and bobs etc, They've been selling the dark blue microfibre cloths for a while now. But today went in and theyve got illumecent cloths and pads. 5 pads for a pound, And each cloth is a pound in...

I know vista has a full screen image viewer, But i dont think you can scroll, zoom etc whilst viewing each picture. Does anyone know of any software that can do this? I.e. View a large photo in full size on my monitor and be able to zoom and scroll about. Had a little search on google, But...

Had my MOT today, MOT tester seemed nice and did a good inspection. Told me my nearside front ball joint needed re newing. Booked in for tomorrow. Although ive found a bill from last year from that garage and remebered having paid for the nearside front balljoint to be replaced last year as it...

Need to get a new splitter for my non-rs. Mine is chewed to death. I quite like the meganne splitter, Does any one have a part number? Know how much they are new? I suppose its best if i can find one in a scrap yard, But i dont know of any. Also if anyone has the part no. for the peugeot...

Thought one of my wheels was out of balance, Every time i turned right it would make a rubbing sound. Thought it was going to be a pain in the ass to get fixed. Actually got off my ass today, had a look and the arch liner is so close to the wheel its rubbing (pretty obvious really) Took it ou...

Just seen this camera on Hot Deals UK, Im looking for a compact camera and this looks just what im after, Read a few reviews and it looks good, Also cheap. I was thinking about the Fujifilm Finepix Z20fd, But im more leaning towards this one now. Any one on here used one...

Ive had 2 little dents on my drivers side door under the wing mirror so not too noticable, A few nights ago i came back to my car with another ding right in the middle of the door, not deep but a 5cm line going over the curve of the door :mad:. Does anyone know anyone i can call out, or visit...

Just changed my oil on the clio, Put 5w40 Fully synthetic in. Took forever to get the sump plug out. Had to buy a 10mm square plug because thats all they had and dremel it down to 8mm to fit! Nightmare. Still its done now and feels much better to drive. The oil was thick black, Needed...

Looking around my car to check everythings ok, Also because ive got a slight rubbing sound when i turn right. Should these sit flat? If this isnt right, Can someone tell me how to get it sitting flat myself? Left: Right: Cheers.

Hi, Had a rubbing sound when turning right only and its starting to concern me, Its not very loud, Just sounds like a wobble rubbing against something. No tyres are rubbing against anything as far as i can tell. Ive checked all the nuts, There fine. Thought it was the rear left wheel at...

Just brought some dynamat extreme from halfrauds, Thought it was 17.99 but turns out it was on the wrong hanger and was 24.99. Still took the plunge and have spend the last hour doing a few patches on the door cars and door shell. Havent done it thick because im not paying out another 25 quid...

Just been down to Renault to get a quote for a cambelt and aux belt change. Prices are inc VAT & Labour. Plus.. he said a 20% discout. Valid until 2nd jan. Ill list what hes printed out, Just incase anyone who knows there stuff can look it over for me please. Also might help anyone whos...

Whats the thread size on a 1.2 16v airbox screw please? Ive only got one on at the moment so cant take it off and go to get one matched. Also what M thread are they e.g. M6? If they have one that will fit? Cheers.

Just opened my bonnet to fill up my windscreen wash, Saw this cover propped up where it should be, And not seated down. It was just above the engine, I can see it slots back on, But its loose... Is there a screw that secures it, Or is it a clip on job? Pic: Cheers.

Quick question because i cant find what im looking for. Where is the brake fluid reservoir opening in the engine bay for 1.2 16v? Is it back left? And also how does it open ? Twist? Cheers

When changing the brake discs and pads, I understand that the brake fluid reservoir cap needs to be taken off, So that the piston can be wound back with a G-clamp. When brake discs and pads are on, I need to slowly pump the brake pedal to set the brake pads against the discs right? What i...

Ive got my brake discs and pads through from brakepartsinternational. Im just after some quick info and advice before i get my mate to fit them. He has done a few sets so im sure he will be fine, But : what size spanners will he need? And What (im not sure what its measured in.. nm?) do...

Ive been talking to my mum and ive tried to find an answer on the internet, But cant seem to find exactly what i want to know (or how to phrase it properly) We have 2 cars. If she was to keep her car insured with direct line and keep the ncb she has on it... Could she insure me in her...