Search results

As above : http://www.halfords.com/motoring-travel/tools-diy/head-gasket-exhaust-repairs/loctite-5920-premium-silicone-copper-gasket-maker-sealant Paste just cracks.

I've got the same problem, I changed the cat to manifold kit with the new springs, and it didn't make a difference. Also the clamp that clamps the cat to the center silencer isnt that great, Ive tried quite a few and haven't had much luck getting the cat to sit higher as it just sags under...

This might help

Good stuff mate, might egg me on go get mine sorted for summer.

I'm also interested to know if the price is fixed? and is there a minimum age?

Should do, I did some looking into it and you need the right tuner or update list cable otherwise it wont work, so the one you've bought now should work.

I was just about to pipe in with the update list thing, Ive had this in my ebay watch list for years, need to order one up at some point. Cheapest I've found. http://www.ebay.co.uk/itm/370773267685?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

I think camskill said they wouldn't match tyreleader to me as they are a German company. I've used them 3 times now, no problems, 4 days for delivery on average.

Didnt know this, will look into it ! cheers.

Yeah, Ive got the 120mm one and the 4" backing plate. This one would be fine, from hong kong though, http://www.ebay.co.uk/itm/4-inch-M14-Diamond-stone-polishing-VELCRO-pad-holder-backer-hook-and-loop-/181145405532?pt=LH_DefaultDomain_3&hash=item2a2d1b885c 4" backing pad and whichever of your...

Looks pretty clean even without a machine ! If you want cheap... get yourself a silverline, they are heavy and possibly have a sharp start etc, but if you get a cheap backing plate (m14 hook and loop) in whatever size with some decent polishing pads you can get some nice results...

8mm square

Nice updates !

I had a noise for ages, sounded like a penny being span in a jar, I think it was a mixture of just the engine being a bit tappy in general, but eventually I found my cat to manifold bolts had rusted themselves together yet had no tension in the springs because the gasket had worn down over time...

Your cluster has come off the ball type connector, it pops on and allows the light unit to be leveled up and down, take the light out and look inside, in the middle you should see what im talking about, see if you can pop it back into place and it will sit right again. I have some pictures in my...

Do you know roughly how much he charges? Pm if you want. Thanks.

Sorry I'm sure it's been covered before for this area but I could do with a recommendation, for a good but reasonably priced place to get my alignment done. I usually use my local tyre shop but he did such a s**t job last time I'll avoid going back. Having tyres fitted in the morning then want...

As above with your budget firstly Id get PS3's, if not either V12's or rainsport 3's. tyreleader is good but they take 24 to 72 hours to arrive from somewhere in Germany I think.

Looks tidy, nice work !

I stripped down the motor tonight, cleaned all the dirt and muck out, reassembled it, if anyone can help me out with which solenoid to buy I'd appreciate it! Then I'll test it out before I fit it. Getting the 4 brushes back on was a pain in the arse !

Think the starter motor is Bosch ? 8200466744 Think this solenoid might fit anyone confirm ? http://pages.ebay.com/link/?nav=item.view&alt=web&id=111235845992

My starter motor has developed a screech when starting the car. I've bought a 2nd hand starter. Plans where to just swap it over but im thinking of stripping it down to clean it up and put a new solenoid on. Does anyone know what type or model the original Valeo unit is ? So I can find a new...

I stuck an upper PTFE gasket on at the same time as changing the plugs, probably reading the same info as you, if your only planning on changing the plugs and leaving it be you might be fine with the original gasket, otherwise if worried order a new or PTFE one.

More likely to be a wheel bearing on the way out, could possibly be your gearbox whining (dip the clutch and see if it goes). Also I've learnt to turn the music up, unless its very obvious there are lots of air noises to chase with no outcome. CV joint would just clatter on tight corners.

I took a D3000 2 years ago to Iceland, I didnt see the lights but theres plenty of photos to take elsewhere, the above is good advice. Focus on the moon, leave it in manual and play about with the settings, when I first went I didnt know much about photography (im still a bit s**t) but I was...

Both lights are flickering or just 1 ? I would guess and ballasts and or bulbs, the hids direct bulbs are cheaper than finding a set of 2nd hand ballasts so get a pair of those first and try them. Although someone might be able to inform you that its not going to be the bulbs and more likely...

Very nice work ! Car looks great.

Id try a new brake switch sensor, and cleaning the contacts of the YAW sensor with a dab of oil on the metal contacts afterwards.

4300k is standard I think.

Buy this and this and like above if the boot isnt split clean the grease off the CV lip, slide it back on and clamp the band on. http://www.ebay.co.uk/itm/151119499788?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649...