Search results

just delete from the bear where the frame of the window crossover it, to give the impression it is behind it

yeah i would drill the hole, then put sealant round the hole and then rivet it in place so the sealant keeps the hole water tight

hey buddy i need to do this too as one of mine has come away slightly, i also have the clips. mine is currently glued and screwed in the right places so what i am planning on doing is using mask tape to run a line along the car where the top of the skirt comes up to, then see how far up into the...

have a look at www.tutorialized.com for general stuff or www.digimods.co.uk is good for car chops

i did mine a slightly different way, i left the stock tweeters in and added the new tweeters to the door card. remove the original woofer and cut off the connector and extend this cable and have it going into the main input of the crossover then run cables out of the crossover back to the...

no mate either screw it in places or use bolts with washers and nuts

:)

not really they are actually quite a good investment as i can split them when i sell the car and get more back for them as they normal retail over £600 and there not that bad on the car, its not as if they are ripspeed alloys. sure turinis may look better but they would have cost more than...

i do to but cant complain for £150 really lol :)

pretty sure i have seen just the glass on ebay for about £10

ive got these and refurbed them in ford graphic grey metallic

awesome shots mate, how does shooting bike compare to shooting cars, are they harder

on a 1.2 you wont see much in the way in performance gains anyway, if you are after one for the induction sound then the normal pipercross filter is alot cheaper (think mine was about £40 with fitting plate) and sounds pretty good

for a first attempt there not nearly as bad as i was expecting, you seem like you have got the technique right. i would suggest using a longer lens or getting closer as i find you get better results when you can track one part of the car like the wing mirror rather than just tracking the whole...

try www.auto-paint.co.uk, they always seem to be good quality

lol i wouldnt of had that problem if my wireless camera shutter remote had turned up by today as then i can fire it from inside the car

thats what i was doing and was how i got locked out the car lol

:) thanks marky, yeah it wasnt too hard to edit out, sky is easy but the buildings in the saab pics were tricky in short its a big arse pole that uses suction mounts to stick it onto the car with you camera mounted at the other end

well after testing out my rig on my dads car (as seen in this thread http://www.cliosport.net/forum/showthread.php?t=398678) i took some pics of my clio. i only got one picture as my car decided to lock me out with the keys in the ignition and the engine running, stranded down a country lane...

basically there is a PC downstairs (running vista) connected to the router via ethernet cable, when this pc is off the wireless network is fine and all devices(pc running xp, ps3 etc) connect to it and receive full internet access. however when the pc downstairs is turned on the wireless signal...

thanks for all the comments guys once i have bought a super clamp and new tripod head it will come to about £120, so far i have spent £45 for the 20ft tubing (except they sent me two kits so i have 8x5ft poles :)) £25 for the suction mounts, and about £10 on jubilee clips and other little...

yeah i think your probably right i will just stick with the bonnet mounted rig for now, that pic looks good buddy

yeah shadowness i was thinking of the superclamp idea, this was just for testing the tubes etc, it worked quite well and the best bit is that its portable as the tubes connect together so i can fit them all in my clio. http://www.automotiverigs.com/ i did look at under car rigs too like these...

thanks guys, the rig looks like this, its made of 5ft lengths of aluminium that has a flange on them allowing the top of one to go into the bottom of the other, i drilled and bolted them to stop them coming apart, for this shoot i only used two poles but i have 2 more if i really need them...

Hi guys looking for a bit of help on this issue as its driving me mad, we have a sky wireless network in our house and it runs a pc (running xp), ps3 and the odd laptop. Connected to the router via cable is another pc running vista, however when this pc is turned on it seems to kill the wireless...

thanks mate, yeah here is a before shot

hey guys just finished going through the pics from a little test shoot i did today, on the whole i am pretty pleased with the rig setup, the biggest difficult was that the ground was bumpy in places so next time i will find a better location with a smoother road. the photoshoping out of the rig...

ive got a 10d i have used if for the last 4 years and still get good results from it however i am possibly looking to upgrade this summer to a 5Dmk2, i have been holding off on upgrading to get the most for my money as mentioned the 10d was a semi pro camera when released and back in the day...

have you thought about colour coding just the front and rear bumper and the spoiler, leaving the bumpstrips on the side of the car black

which surround did they send you