Search results

if you buy spax they come with a promise to break within 2 months cant beat that. as for springs never heard of them , only the company

i wouldnt have spax shocks for free they are crappola

i have a mocal 13 row with 80deg stat i never see temps over 100 now even on track

they will fit, get them for pence from a scrap yard

yes they can be added you need, inside wiring loom, engine wiring loom , abs computer from cc 172+ abs wiring loom, clocks from 172 with cc, steering wheel and steering wheel hub surround

ring nick im sure he could knock you one up 01530 273633

k-tec only sell one for a "twisted type" lower engine mount, most if not all phase 1's have a straight dogbone that attaches in a different way to the gearbox. As for side strips you will need the front strips from a phase 2 the rears are the same.

Ive got it ill send it to you if you join up

8v or 16v?

i saw it at the nurburgring the other week looked good

which engine does it have? usually a rev feed can be had from pin 1 of the ECU

4 grand and everything except the shell and a few bits have been replaced

who are you hosted with? most hosting providers will give you a mySQL database for nowt, seditio has a set up procedure all you need is a username and password and the mySQL address ie mySQL16.webserver.webhost.com

check the area where the sump and the bottom end meet there is a rubber gasket in there that perrishes. check the sump plug for signs of leakage also check the gearbox , around the selector rod and between the joints may leak

i got 4 bosch super plugs from euro car parts for 172 £1.10 each lasted well

Its a very good buy ebuyer have it slightly cheaper but more when you add postage http://www.ebuyer.com/UK/product/114132

GSF Unit 5, Mannesmann Close, Swansea Enterprise Centre, Llansamlet, Swansea SA7 9AH Tel : 01792 704980 Sell disks with bearings already pressed in for £60ish each if you think about it, its around the same as buying the bearings and having them fitted

do the revs only drop when the car is under load or do they drop when you stop at a junctions for example? the rear washer is the same reservoir as the front, when you open the boot there are some rubber gators running along the top inside those the pipe that feeds the rear washer breaks over...

very strange myself and people i know have had loads of problems with linksys, you would think they are decent due to being cisco cast offs .

wouldnt get the linksys they are pants, belkin are are little better, the best for blueyonder customers IMO is the Netgear WGR614 link http://www.overclockers.co.uk/acatalog/Cable_Routers.html Ive got one its never dropped unlike my mates linksys tat

the only ones i have seen are from venom motorsport, £65 + vat for 2 so almost £200 for all 4!

not mobile sorry...... also dont like to go past brum to much too many strange people down that way

<<<<<<<<<<<<<<

if your anywhere near manchester ill reset your codes for nowt

it takes ages to get up to 70/75c cooler stat doesnt let oil in until 80c when the stat opens on a cold day it then drops to 60ish unless i rag it, ill tape it up see what happens

be a crap cheap pattern part wouldnt bother to be honest. can you not get any parts from HK? what about australlia it must be cheaper to ship out from there?

there are but only for SRS airbags. My trimmer mate says he re-trims wheels all the time, you could try getting it re-trimmed?

is it cold enough now to start tapeing up my oil cooler?

ive got an 805 running at 4ghz just needs a decent board and ram to get get that high, the whole pc is using 553watts at full load !!!!!

use the visual studio.net installer studio, make sure you include the merge modules as well in the package