Search results

FYI , The part circled, The ring on the top of the piggyback, pops up and the gap you can see on yours between the arm closes. Letting you know the shocks need a refurb

+1

yeah, just whang a pic up we'll tell you if they're funked, If they've done more than 40k i'd do them anyway

a rattle spring, Should come as a set, You cant bend it back to shape?

Take a pic of yours and i'l tell you, The 'piggyback' resovoir has a ring on it which moves when it needs refurbing IIRC

No chance on a 172 unless you want no arches left, What wheels are they? You can get them drilled, but if they have no cap it'l look w**k!

Where you located?

Steering Geom could be off, is it only when driving it?

You must be mad if thats correct! £1700 for a Clio wether its a 200 or not :o

You'l have to replace the bumper, I would have cut it and rewelded it in the place i needed it, even a garage would have done that for £40 or so

Miltek wontworkwith thestandard exhaust, it's a different bore for starters

depends what type of plastic it is, if its textured and you want it smooth you need to sand it and high build it, if its smooth like a bumper etc any primer will suffice as long as its a good key

Was just abouts to say but saw page two lol, This is what it will be i'm pretty confident on that too

VW have a lot of locking wheelnuts like that on earlier golfs, pop in ask them to have a looksie through their master set to see if any fit

bust shock, nackered wheelbearing and the filler neck, How "subtle" was this rut

Its either far too low or somethings bent, Mines about 60-70mm ET37 Superleggeras which you will be less, H&Rs and i dont have any scrubbing even with a passenger, I have "tweaked" the bumper bracket though It doesnt catch the Inner wing either

fine with the ebay ones, they are slightly thinner though because they are meant for the rears, Fronts IIRC is a renault only option and only avaliabe with a shaft!! Theredore you have to line it up with the sensor, I have one i fitted on mine, Works fine and is zinc plated or something to...

you fit all the top mounts correct and all teh bushes? I reckon no! lol

rear shocks shafted, Were they new?

You need to pull it as well as unscrew it

This, another for dont bother with paste

2k then polish them with G3, refine with something less agressive = done dont mince about with 3k and the lowest you should need to go is 1500 grit, anymore you risk taking too much off and making them go milky!

Re: iPhone "must have" apps jailbreak, great game!

This, Mine broke and my lights pointed at the ground, couldnt see for s**t lol

If your a mincer :P Wash your hands after using it you'l be fine Works wonders at healing cuts up too :)

I have a megane scenic steel wheel from an 06 plate as my spare its 16" and worked the offset out to be somewhere around 40 and it clears the front brakes If your just chucking anything on it'l be ok and depends if you have the pennies to use 16's on track! Its 7" wide too

5mm wont be enough, You will have to get the centrebore enlarged, Its about £15 a wheel and get it done properly dont do it with a dremel ike some of the tards on here do!

Bargains, :D Wish i'd found it, I'd matt black the whole car for track! Engine alones worth what you paid!

Mere pence, the little thin ones of 2-3mm? Go to vw and Audi exactly the same engines used in their cars too!

My areas a D Lol, Bottom of the scale almost FTL