Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
No its a genuine blue updated Renault one with loom.
I fitted this before I removed engine when I had a starting issue but the day I removed the engine I think I had the issue where it wouldn't fire so maybe coil pack or leads have given up !
I did buy a 2nd hand set of leads and coil pack off...
I fitted a new TDC sensor and the car hasn't been used since.
Ive tried 2 coil packs but could be unfortunate that both coilpacks are goosed I guess.
will have to see what happens when I can get my mate to check for spark I guess
Still haven't resolved this yet !
It turns over and its getting fuel , hopefully one of my mates will come around over weekend to see if its getting a spark or not
Anybody good with Clio 172's who could help me out / diagnose why I cant get my Clio to fire up.
The car has been off the road since I purchased it as it was a project for trackdays .
Due to a serious road accident and injury I think ive had the car 4 years now and still not driven it :-( .
I...
I did find some more bolts after .
I just assumed or forgot to put more in ! I thought there were bracket holes for wiring loom !
Do you have a part number for the gasket ?
Yeah I will try this buddy also .
Car is on drive and have no decent lights .
Just the the eml light coming on I'm wondering if that's the issue now .
So just remove ignition lead and get an old spark plug and check for ignition . Never done it before but willing to try to get a step closer
Yeah could be water has got in somewhere .
yeah it will pull up any fault codes have been stored . They will clear the faults and see if they appear again. Hopefully it's nothink .
its could be just down to water as they hate any water / damp
The starter motor is behind / underneath the manifold . There's a bolted connection and a small exciter wire which just pushes onto a spade connector .
its in a pig of place really
As far as I'm aware it will keep turning over . Yeah not sure why EML light has come
on and wasn't on before .
im hoping mark who I borrowed the diagnostic tool of is going to pop around one night NS plug it up as he know how to use it better and check sensors data as I'm struggling !
i...
No that goes of when the key is turned to ignition.
its turning over but not firing .
The electrical fault light is on but this afternoon it wasn't .
wonder if tdc sensor has gone faulty . I do have the new blue type fitted
I've now got this displayed on my dash and when I had code reader it mention somethink about throttle position I think . Would this prevent. The car from starting ?
Yeah that's the one buddy .
i now have that on the dash so it's picking up a fault now that wasn't displaying on the dash .
not sure if that's a good thing or not !
I've got a ignition light on the dash now since checking my coilpack and ignition lead order .
Coil 4 to 1st spark plug
coil 3 to 2nd
coil 2 to 3rd
coil 4 to 4th
This wasn't on dash before but comes on now on ignition .
would this just be , coil pack or leads or does the square with zig zag...
I've got my leads as per above .
ive now got the ignition fault light on dash .
Not sure if this is a coincidence or I have got a fault which is preventing it from starting.
connected up my spare coil pack also and the same .
its a square with a zig zag
I will check this lee . Anythink is worth a check and try . The car is stripped out and will see .
Where is the white block (uch ) ?
I've got some cabling tooked up in the drivers footwell
Ok cool will try that .
I know know these cars are a pain when in everyday use so with mine being of he road 2 years and engine been removed it could be anythink !
Just got to check everythink I guess .
Birchdown down done cambelt , clutch and de-phaser so would hope so .
How do I check in getting fuel buddy ?
dash just remains with stop and serv but the red light goes out