Search results

I have an RS2 on my car also which was running 190hp & 157lb/ft on 197 cams which was mapped by Paul at RSTuning. It's going back on Tuesday to have the mapped altered following me replacing the cams with 421's (which from light throttle alreaxy seems to have made the car a bit quicker). The...

It is only gonna get worse leading up and in to the holiday so be safe people. Hooning on the track is fine but hooning on the roads has real consiquences. There's been a few too many "RIP CS'er" threads lately.

One went last night for close on £550 - Nuts what people are prepared to pay for things that they could've pre-ordered.

And then some I'd say.

Not seen this one but I'll keep my eye out. My inlaws live just off Ansty lane

Under ELM BT modules IAT = Inlet Air Temp CWT = Coolant Temp (°c) 78°c is too low. The thermostat should regulate at around 88-90°c if healthy and when really hot it may see 100°c. Pull your stat out and I bet the rubber seal isn't sat right... new stat time.

Drove it/run it in (sadly not as hard as I'd liked but mapping on Tuesday #excited)

Where's all this ginger hatred coming from - Is this because I said the Wifes chilli was awesome at Donnington?

Harsh... I'm 5ft10

Knows it... adds zero power and was a proper C U Next Tuesday to get setup but I love it Tony. Also I don't have to reach for thr gears when I'm strapped I now.

Fitted this

I use this...

Gone a bit beyond that point now Paul lol Had her running loverly last night before home then came in this morning to be greeted by a solid red light. Seems the Earth point gremlins camr in during the night to loosen stuff (or it could've been the 421's made it idle a bit lumpy and it shook...

Clio's don't have "Drag links" - I can only make an assumption they mean the inner steering rack control arm ball joint (Or the "drumstick" as some refer to them as)

The D-shape tool is a position setting tool, not a lock tool. Try using it as such and it'll bend the tool amd destroy your cams.

Its always been abused (previous owner had it for over 6yrs and he kicked it in on track to). Treat em mean, keep em keen hehehe

It worked and it didn't leak... what's 160k really?

Why, i'm not an engine builder lol? It's my own car so corners were cut (didn't check test them prior to fitting) so it's my own fault. It was all done and dusted and running before 5pm though.

Yeah, the head was built up from a used head that I thought had 8 clipped valves... didn't check the other 8 though. It was only down 50psi on all four but enough to warrant pulling it.

Well, back on schedule now (With compression)... fekking bent valves!

No that's my 10am job... bricking it

Woke up yesterday morning and hated everything... So new engine and de-A/C

Also worth noting to that these are with 100% NEW fixings to.

No matter where you move/store them to, accessing them remotely from a cloud/network storage device will mean your phone will have to send and recieve data to that device. If you don't do it over your WiFi then it will consume your data allowance to achieve this.

Yep it will be fine but always tighten the crank pulley first before moving to the cams

You will need to use a puller on it (there are two small threaded holes to allow this) then clean up the crank/sprocket contact faces. As long as you have two of the three sprockets moving you will be okay but you will have to double check the timing after angle tightening.

Sorry Tony, I should've left you with the setup. There's going to be a "No Gingers allowed" sign next time I guess

The Team Burpspeed hospitality tent is the best I've ever experienced - chef is awesome with food and banter plus not bad looking either (no Tony not you)

When I heard that Gordini was coming back to the marque I was like "yeeeessssss" but then they raped it harder than Indiana Jones and the Crystal Skulls movie. A great car but needs wheels replacing (Turinni's look epic), lowering and then all the white tack (IMO) colour coding. The interior...

They do self lock but only if you unlock it with the key fob and do not open a door within a set time. They do not have an automatic/handsfree entry/exit system