Search results

When you say voltage drop that is usually a wire which drops voltage when current passes through. The starter motor earth is the strap from the gearbox to the chassis rail, clean up all contacts on that. Voltage drop can be tested at each point of the circuit. You test the circuit with no load...

Love the awkward "Cheers" at the end, down with the lads! The more I watch them the more I like them actually, there's clearly a lot more to Schmee than meets the eye. SOL I'm not so sure about, he really needs to up his video game as I think a lot of his subscribers are historic as it doesn't...

I wasn't involved in organising this matey just put the idea out there because I wanted to do one but am not familiar with the regional rep process for things like this. I'd still love to do it and it looks like there's quite a lot of interest now. I'm sure even more could be drummed up through...

I got my 197 springs from Barrie at ALS performance. They're pretty much the same price as the supertech ones if you buy them brand new. £118 last time I spoke to Renault. Eventually I'm going boost but my demands are quite similar, not too expensive but reliable. I'm going for supertech valves...

I have thought about that actually but to please myself I'd want to do something high quality from the start with a good amount of camera angles etc. Unfortunately car channels don't seem to work unless you have multiple and simultaneous clips of the car and I'd like to give proper editing ago...

Mine's road legal but I can't wait to get a trailer as it's horrible to drive on the road. I'd be screwed if something happened at a track miles from home.

Have been thinking of starting my own channel for ages now but haven't been able to afford the camera gear. Will probably start something quite soon fingers crossed.

Engineering explained has an extremely confused identity. He's car throttle click bait "five things you shouldn't do" kind of stuff now. Shame as his old stuff was great.

Oh yeah that too! I don't follow motortrend because they put out too much that I don't like. Really can't work out how Finnegan can get away with all his own merch on Roadkill.

Hammerite is pretty good at not leaving brush marks, the subframe I did with it didn't have any brush marks at all. @SamHowell , Tom said yours looked good and was done with a brush. I looked at getting a spray gun and doing mine but the materials and making sure the airlines are totally dry...

Oh it's so painful. Amazing fab work though I like MrJWW - https://www.youtube.com/channel/UCK_zuVq6ZpSRMjsZ5JRPx5g - living the life but a top chap unlike a lot of the rich youtubers MCM - everyone knows jafromobile - https://www.youtube.com/channel/UCyGT_yinKL7uRiZmTjC17RQ - brilliant engine...

Oh look there's a Graham. Much pace needed for oil cooler install.

Thanks for sharing this, I've snapped one up.

Having read that it sounds like an injector or the lambda.

Thanks Dan. Much quicker to take out than put back, torquing everything up correctly took an age. Thanks everyone for all the likes too. No interesting pictures today I'm afraid as after all the work the car looks absolutely identical. In the end I swapped the whole 182 front subframe set up...

Yes! Desperate to put the Cup on while it's not tucked away.

I haven't read it all but I used to work for an insurance company. When the car that caused the accident wasn't insured the claim would go through the MIB under the insurer which last had that car insured according to MID. We used to just go through MID with older and older dates until we found...

Certainly will matey. It's likely going to be something at the weekend as it's difficult to get time off work before September :'( I should really write this update later when the car is running but my energy to finish the job is low this morning so I'd rather sit here while the mcdonalds...

What's a good degreaser to use. Last time I used brake cleaner and then had problems with the paint adhering properly.

I'm swapping the engine in my car in a few days and wanted to paint up a few things as I go. Planned on using hammerite for the box and engine enamel for the block. Two questions What's best for the rest of the mounts/inlets etc. How best to prep them as halfords paint wipes don't cut the mustard

I've just had exactly the same thought as this. To command any high figure it needs to be totally standard and be extremely low mileage and even then it's not a collectors car and never will fly up in value like the v6 or limited edition performance cars.

No Mark you can't sell! Got knows how those tyres have an E wet grip rating, they're like slicks!

This is usually a wiring fault between the pedal and the ECU, there are 2 intermediate connection blocks. White one in the fusebox which is suceptable to water and the bulkhead connector which is usually OK.

Yeah have done all the airbag bits already. Just the UCH will need reconfiguring which is an easy job from my investigation earlier.

Plans for next week Engine swap for the 182 engine with 438s TTV billet flywheel Sort steering Harnesses Then a track day needs to happen.

Yeah that's the plan now. After speaking to EFI about their ECU virginisation and copying the ECU I've been on CLIP this afternoon and found I can just reconfigure the UCH to not look for the ABS and Steering wheel angle sensor. That's the plan now to just swap the whole ECU kit over. Will...

Yeah you can get into them

Afternoon chaps Wanting to put my 182 cammed engine in my 172 cup for use over the summer and have some questions regarding the map as I don't want to have a custom map. Yes it's not ideal by any stretch of the imagination but it's a temporary thing before I get boost. The 182 was mapped by...

I haven't no but I did swap to a different column and still have the same issue.

Slightly different cam cover cut using the plenum resolves the differences. Everything else is the same.