Search results

Thanks very much for posting that up, some heavier and some lighter than I expected! Won't be going heated screen, nor composite panels, the bang for buck ratio isn't good enough.

Progress is looking good, be really good to see the finished results! Is there a guide anywhere for clearances and preloads for the Clio boxes?

The face which sits against the bracket around the mounting bolt holes. At that price buy them regardless.

If you were that keen on the konis, just swap the steering knuckles for 54mm

Out of interest, what did the genuine wishbones cost you if you dont mind my asking?

Not the best picture as this one is modified, but on the older ones the hole sat inline with the wishbone. On cup versions and later cars the balljoint was canted forward to give more castor.

I'm looking to replace the balljoints on my clio as they are visibly different and one looks "meatier" than the other. Short of buying new OEM wishbones and then re--bushing them, which I want to avoid as mine have the PMS stiffening plates, what brands are people using? Car is used mainly on...

Check your wishbones are the later ones with the extra castor, and not the early shopping spec. Track rod ends are missing from your list and if balljoints are worn, they will be too. Roll bar bushes as mentioned above What are your rear beam bushes like? They can have a fairly horrifying...

Issue is you don't get the carriers, or probably the slider pins, which is where most of the problems lie.

Good to know it's not just mine. I'll look into the coil movement and see if its there Cheers

From memory there are bolts down through the inner wing from the top into the bracket

I realise it will be loud, I dont care about that, its expected, I wondered specifically if Spherical joints and coilover dampers were known to rattle from cold at low speeds on rough surfaces. I'm not alien to building cars, nor driving them stripped out, but I've never gone beyond polybushes...

Yeah, much prefered the design with the pins bolted into the carrier and running in bushes in the caliper itself, at least when you got a recon caliper it was sorted.

Yeah its loud, exhaus is loud, stones on the bottom of the car are loud, tyre noise and vibration are loud and the whole car behaves like a drum, but its not the volume, more the noise that concerns me. I've given the bolts a once over but it still does it....

Odd question I know but bear with me! My clio is stripped, caged and has spherical topmounts, PMS spherical rear beam kit and polybushes elsewhere and the noise it makes on rough surfaces would have me pulling over in any normal road car looking for broken bits. Is this normal, or should it be...

Yeah the 172 was silly cheap compared to the competition and substantially quicker than most so sold well to a wide audience. The 197 was a niche product, fair enough good on track, but for a road car, thirsty, hard work and too expensive.

Carbon cannister is gone, although the little valve from the top of it seems noisy! (left that plugged into the cable) Tar is gone Loom I've done before on a previous car, so not worth the effort for 3kg or so. Rear wiper is gone 1 horn is gone along with the larger of the two brackets Yeah I...

Amazed they put a guy on track on 20 year old tyres to be honest, so the cars, that's just plain stupid.

Worth finding that and getting rid! I'm at 1005kg just now with a full cage, but even 20-30kg would be nice between battery, window regulators and stuff like that! Cheers

PAS is still there, EPAS is a consideration for the future Battery is on the list All that has already gone Is that just packing behind the bumper? Haha, mirrors are staying (road use and pulling left after an overtake on UK circuits) I'm avoiding plastic windows as it scratches horribly and...

Aircon pump and belt and so on have gone, so it doesnt work anyway. I want to keep the heater and blower for demist (never seen the point in removing it all and then not being able to see)

Yeah I want to keep that as I live in scotland, do wet trackdays and drive it on the road, but if the aircon unit is massively heavy it might be worth swapping to something simpler.

Whereabouts? rear bumper? Are the crash bars/bumper mounts heavy? Mine still has the dash in it (which is staying) but the aircon heater matrix is still there and Ive no idea what it weighs?

About 75kg and heading towards 70 mate

Does anyone have a list of dates and organisers for events at Knockhill this year?

Hi, I have a clio track car which has had most of the obvious weight removed (stripped, buckets, cage etc). There are a few areas I'm aware of I want to address, such as the electric windows, and others I wish to leave as it's used on the road (central locking for instance), but where does...

Sorry, I should have been clearer. I mean they weren't fitted to base spec lagunas or anything, only 2.0 clios? Which means they are now all at least ten years old, and there aren't millions of them around. Cheers

Hmmm. I assume the carriers are 172/182 specific? Mine on 121k+track use, so likely knackered :(

Hi, My 2002 ph2 172 seems to have a lot of play in the caliper relative to the carrier. Do these cars tend to wear the pins, or the carriers themselves? I found these http://m.ebay.com/itm/261437140249?_mwBanner=1 But no confirmation that they fit a 172. Does anyone know if they're correct...