Search results

stanard flywheel is fine mate. light enuff as it is.

or u could swap the wires around on ur original one ;)

Paul u can have a drive in mine if u want mate next time i see you. Need a gearbox first though hehe. iv had all the mods u have mentioned, and as u know its pretty quick compared to most other valvers, and enough 2 litres its come against in its time ;0) With all the work, it has about the...

Thing about having yours rebuilt is that it will almost be like having a new engine in the car. If you stick a willy lump in its gonna have some miles on it. Personally id go for what your doing, but try and find a megane bottom end for around £2-300. That would be a nice quick, and torquey...

my column is fuked too. but engine may be comin out for new box and clutch so i think ill fit another one then. bit scared about taking the lump out myself though. bit of an amateur! lol

there was an sms one on ebay for about £275 i think!

http://homepages.nildram.co.uk/~cadams/images/mycar/iscv2.jpg the gold bit on the pic, with the circular rubber around it! take off the small pipe going from that to ur airbox, and spray some in whilst the engine is running, and open and close it by reving it a bit.

new box on its way. a stronger one this time :)

no carb dude!

changed fuel filter. i do have a pbv yes. not sure about setting the valve up, il have a look at the other topic.

thanks mate! iv got a 19 16v ECU on at the moment.

when i changed the potentiometer, it was complete with the throttle body, iscv and the lot, so it hadnt been touched. but it was from another car. would this need setting up properly???

anyone?

thats the potentiometer. dont touch that or itll have to be setup at renault. i found out the hard way hehe

take one of the rubbers off going to the airbox that conects to the iscv, spray it with carb cleaner in whilst revving it a bit so it opens and closes. might have to keep revs up as it will probably stall if not or its dead easy to take off, , make sure u open and close it so it cleans the...

its teh gold thing, with black round shaped rubber around it! http://homepages.nildram.co.uk/~cadams/images/mycar/iscv2.jpg

i bought it from a mate whos engine siezed!

replied to ur other msg mate! i dont have an ecotek

mine fine once fully warm. mainly when cold, and after its had a bit of gas!

well mines the same. iv done the following: - changed ISCV - changed potentiometer - changed speedo cable and road speed sensor - changed lambda - changed throttle body - tried another ECU Its much better and it rarely cuts out but it still drops really low revs, and sometimes idles...

hmmmmm lol

what shops sell them type of bolts. sounds fekin daft but i cant think where to go other than where iv been already! lol cheers

Quote: Originally posted by cliosportcraig on 06 March 2004 http://www.screwfix.com/app/sfd/cat/cat.jsp?ts=83729&id=100045http://www.screwfix.com/app/sfd/cat/cat.jsp?ts=83729&id=100045 nice one looks good ill have a boootchers!

fitting roll cage in the back. I want some nice decent bolts like!

Might sound a daft question, but im after some bolts, they need to be a specific size with hexagen heads. iv been to B&Q, Focus DIY and halfords and they only have crap uns that either are teh wrong size or have cross heads! where can i go people that have loads? cheers

iv only seen one, and it was built in denamark or somewhere. i dont know of any in the UK. actually Hill Power may have done one. but ur looking at a lot of pennies, and the possibility of loosing power steering!

cars off the road for a bit , cos iv broken the box, but b4 fitting the cage, teh carpet needs to be done 1st idealy. http://homepages.nildram.co.uk/~cadams/images/mycar/stripped/stripped2.jpg http://homepages.nildram.co.uk/~cadams/images/mycar/stripped/cage.jpg

rato, cars currently stripped to the max with bucket seats, goes like sh1t off a shovel, but doesnt look too tidy inside with all the bare metal showing. Iv got a cage to fit, but before it goes in i was planning on carpeting it all. prob use the original carpet for the front, but the standard...

to be honest unless u got other mods, ull be lucky to see 6hp mate!

iv got a safety devices cage, not fitted it yet tho! ill post pics tomorrow!