Search results

god i wish my brake pipes were that neat :( what connections have you used where the pipes go through the bulkhead and through the boot floor?

:rolleyes: that slide is not induced by lift off oversteer, it is due to the rear tyres having no traction, he could have gone round at any speed maintaining throttle and it still would of spun! in fact at the end it does spin without any ecouragement, as if its on ice. so no its not lift...

i might put them on the track car, and then watch them melt :evil:

you are joking me arent you! :S lift off oversteer works at speed, not at 30mph which it looks like he is doing, look closely at the rear wheels! lord give me strength!! :banghead: :slap: :headno:

sounds like you have been sent or ordered the wrong pads there, i had the same trouble with a set which turned out to be for an rsi iirc unless as above you haven't wound the piston back in fully

are they the paints that have been discontinued/made illegal due to the toxins in them? as the paint had hardener in it already meaning they didnt technically need lacquer? whereas modern water based paints are very soft and need lacquer to protect them against uv and scratches etc

simple answer is......read the instruction of whatever you sprayed it with, if it says apply lacquer then do it odds on it says you need to use lacquer

are rear calipers for a 1995 mk1 clio the same fitment as a mk2 1*2 etc? cheers

i came across these beauties :cool: taking it to a WHOLE new level! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=330218296527&Category=43117&_trksid=p3907.m29 :quiet: :quiet: :quiet:

yes you need lacquer

its got sumat on the rear tyres to make it do that

Re: My mk1 track car blog 330mm £130 delivered from R sport :D lol do it! would match your seats a dream with the renaultsport logo :cool:

there is a ridge around that area on the mk1 aswell it got the hammer treatment to flatten it down lol :evil:

feels spot on :D gonna test fit it on saturday, then take it off again until the car is on the road so i dont wreck it with oily hands :S

330mm thats how they come from renaultsport in france, you could have the top bit retrimmed i suppose yeh £130 all in and i'll soon tell you if all boss kits fit as i'll be fitting it to my mk1 omp boss (says it fits momo, sparco, sabelt wheels so should be reet)

no they are £100.64 plus £10 delivery, then add vat to that :)

they dont have one, have to ring R sport and order from them

lol snap mine arrived this morning too :approve: :cool:

Re: My mk1 track car blog few pics of the wheel for those who havent seen one :D :approve: very very pleased with it :D :cool:

yeh beaniemoo's is running on 172 management did you get my pm? any ideas? lol

trust me the engine mounts are the least of your worries :rolleyes:

Re: My mk1 track car blog came into work this morning, parcel on my desk, opened it up....... its my sabelt renaultsport steering wheel :D :D :D well chuffed with service from R sport and big thanks to D4ve for his help :clap:

injector lock relay? which ones that? :o you'll have to bear with me here electronics was never my strong point lol

sound job, cheers bud :D

thing is on initial ignition it closes the relay momentarily, thus priming the fuel lines ready to start but then doesnt seem to close it again under cranking, so im wondering if its a sensor not telling the ecu the engine is being turned over, want to rule this out before i set about messing...

hmm i will have to look into it at the weekend :( well im pretty sure im not getting either spark or fuel, but without taking injectors out im not 100% on no fuel, definately no spark though!

you dont mean the cps do you? that has 2 wires? and you dont mean the speedo drive as yours will be mechanical like mine! where exactly does the speed sensor plug into on the box (ie top back, side, bottom etc) please god let this be the answer to my non starting problem! :quiet:

out of interest, does it matter whether the connections on the oil cooler point up or down?

right the small earth at the back comes out of the loom around where it branches off one way for starter, another way for ecu, and another for injectors etc the speed sensor with the 3 wires, where does that plug into? dont remember connecting that :o

lol sorry i know its alot to ask :o