What's new
By:
Filters
ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. mr.pink87

    AEM Wideband Controller

    You can feed the wideband signal into the EC1 and have it running closed loop control at all loads/rpms by setting the target lambda table.
  2. mr.pink87

    PH2 172 ECU Pinout

    PM me your email adress.
  3. mr.pink87

    Best seatframes for buckets?

    OMP subframes fit fine if you keep the inner spacer things and remove the outers. Subframes offer a nice low position when buckets are installed with sidemounts and without runners.
  4. mr.pink87

    Coilover Help

    ph1 or ph2 1.2 16v?
  5. mr.pink87

    Braided lines -> are copper washers needed ?

    Not needed.
  6. mr.pink87

    Should i fit an oil cooler to my track car?

    I'd fit one on a track car tbh. On my lightly modified engine i had temps up to 145°C, now with a small 13 row the temp peaks at about 120°C.
  7. mr.pink87

    HELP.... Fk springs, will they fit?

    They won't be under sufficient pretension with standard shocks. Rears may fall out under special circumstances.
  8. mr.pink87

    PH2 172 ET

    Rears will rub when the car is loaded and running over speedbumps etc. I am running Valver Speedlines (ET38ish) with 195-50s and they occasionally rub on the rear.
  9. mr.pink87

    Brake pads

    Care to explain?
  10. mr.pink87

    PH2 172 ET

    Will rub on the outer arches.
  11. mr.pink87

    HELP.... Fk springs, will they fit?

    They'll fit fine but you'll need shortened shock absorbers aswell.
  12. mr.pink87

    Brake pads

    DS2500.
  13. mr.pink87

    PH2 172 ET

    48.5
  14. mr.pink87

    Track rod length

    Track rods are dealer only items. But should be fine with 20mm of thread in the rod end.
  15. mr.pink87

    Cutting springs

    Sick rake bruv....
  16. mr.pink87

    How to set up AST topmounts?

    For maximum negative camber the three allen cap bolts must face to the outside of the car.
  17. mr.pink87

    Speedlines, OZ or Sparco alloys?

    http://www.cliosport.net/forum/showthread.php?584910-Turini-s-or-Superturismo-s Both look lush tbh.
  18. mr.pink87

    Speedlines, OZ or Sparco alloys?

    Super T's in 16" and a slight drop will look awesome. Someone from NL on here had them on, looked the nuts.
  19. mr.pink87

    Need help with rear shocks

    Everything working fine?
  20. mr.pink87

    exhaust mani to cat bolt loose and rounded.

    Dremel it off and use a new genuine fitting kit.
  21. mr.pink87

    Front End Feels Weird At 52k Miles

    Lower balljoints ok? Shocks ok? Wishbone bushes ok?
  22. mr.pink87

    Rear wheels/suspension

    Might had a stub axle replaced once. They come in different width.
  23. mr.pink87

    fitting ARP rod bolts

    You need to torque them up 3 times iirc. -> torque up to 42 lbft -> slack it -> torque up ...
  24. mr.pink87

    Fuel Rail to AN Fittings

    It's a K4J/M inlet.
  25. mr.pink87

    Removing the heater...couple of questions

    Sagem box is the UCH. You shouldn't block the heater matriy pipes off but use a 180° elbow and joiner to connect the main coolant hose with the thermostat housing. Use the search. Weightwise i'd guess you'll lose about 5-10kgs.
  26. mr.pink87

    Best Exhaust for a Williams?

    OMP Group N? http://www.youtube.com/watch?v=wnYdlfpLr38&feature=related
  27. mr.pink87

    Clio 2 phase 6

    Really like the Campus ph5 but the Brazil-booty-edition looks shyte.
  28. mr.pink87

    back in the game!

    Addictive little shitboxes, aren't they!?
  29. mr.pink87

    The PH1 172 Appreciation Thread.

    Awesome!
  30. mr.pink87

    Photo shoot of my 172 exclusive

    Is it blue or green?
Top