Search results

You can buy the Backbox from renault. IIRC it's around £90 Give ur local dealer a ring.

You will need the lights out to do it! Be very very carefull not to break the wee white bit!

The Renault guide says that when a belt is removed a new 1 must be fitted! To do the cam belt you have to remove the aux belt, so a new 1 should be fitted!

Thanks Henk! As usual ur support is top notch! I'll give this new map a go 2nite!

In work atm but there is the black sensor which is the map sensor and then there's a grey sensor in front of the throttle body? What's it?

what's the other sensor then? Mine def has 1 on each side of the manifold?

0w30 will piss out all over the place! May as well use water imo! Tried it there and it's recommending Edge Diesel 5w40? PMSL

Just pull it! It's held on my rubber popper clip things!!!

Air flow meter is on the opposite side of the Inlet manifold from the map sensor iirc. Like all sensors they can easily go faulty. Prob nothing to do with the BMC imo!

Yep I remember you telling me this before I did mine! And it was an absolute ballocks to do! Hahaha! He'll have fun doing it!

Thanks Henk, great service as usual! You can disregard my email from wednesday then! If you could pm or email me when the new map has been uploaded I would really appreciate it! Stuart

Have you thought of the possibility that the engine is fine and that the Guy before you may have used the wrong oil? This would cause the hydraulic lifters to stick and car will sound like a ford?

Nope, It's either drop the frame, or raise the engine a bit! Curse to do! Is the weeping bad?

Rope around the inlet manifold and pull? Or right round the engine! But seriously I slackening all the mounts and jacked the engine out slightly from below! Seemed to do the tick!

150 for the head and about 250 to fit! That's what I'd be doing! Then we'll organise a Cliosport meet and greet at the sellers house? :D

Mine does exactly the same when running all Cal files (Ron98). And Yes Henk it's on the 6400 ---- map. Any idea what's causing it?

Got a few numbers 7703072352 7701056217 Thats the clips for the scuttle pannel 8200198528 Bolts for ABS

Mine does the same, tho not sure if it's meant 2! I might email Henk to find out?

I'm running Brembo drilled discs nd have had no probs at all touch wood!!!

These for rear http://www.europerformance.co.uk/pages/products/product_info.mhtml?product=558813 With these front http://www.europerformance.co.uk/pages/products/product_info.mhtml?product=556023 If you want them matching!

Brembo drilled front discs with ferrodo pads (OEM replacement 1's) Stops very sharp! :D

Rear discs aint vented and on ur cup they're only really there for a handbrake!

Something like these would be better! http://www.europerformance.co.uk/pages/products/product_info.mhtml?product=3689741

They may well have only put a belt on?

Mine s doing the same thing 2! Thought there was something wrong with it, but obviously it's just a s**t renault! Lol! It's ok when the weather is not so warm!

I dillute mine 50/50 seems to work well plus it lasts longer!!! :D

Leads are 45ish + vat! I think said stealer was robbing you blind!

I take it you have aircon? I didn't bother with the cold air feed down to the bottom grill as there isn't enough room. I ran mine to the top grill instead!

The FF's are even worse when it's a warm day and you're running the air con! They just don't seem to want to move!

The BMC CDA Induction kit on the other hand is the dogs dangly bits! :D