Search results

RS2 will go in a Kangoo bay and I did the belts on that lump yes... drop me a PM if you want any more info though so we can keep this on topic for the guy. Mick

But racing cars run dem so defendz yourself badmanz ;-) Honestly, G172... Brembo OE discs and pads... cracking setup for the cash. I personally prefer the OE rear discs but have fitted loads of the Mintex rears he supplys without issue but you have to watch these with ABS reluctor rings as...

Nice looking RB by the way especially sat next to that R8. One day, I will have an R8 in my life.

Shame Chip isnt here for this one... The 197 cams won't give you a serious gain in peak power I'm afraid but they do give a really good spread of torque from what we've seen on the vehicles that have opted to run them. Then add this to there relatively low cost (£70-150 in the UK) it is what...

Okay, what car is it firstly and secondly it sounds like an air leak to me but here's something to try. Engine on and running > Does the engine speed increase when you touch the pedal still? (Yes/No)

I believe the injector ports are at different centers so no, the above unit won't fit. As above, a Jenvey kit or some extruded aluminium fuel rail will do the job you need for a damn sight less cash than the Cup item. I can't believe how much the X65 fuel rail is compared to the 197/200.

You really need to see what the box and its associated management system is seeing to make it turn the light on. My best guess is an issue due to low oil level, low oil pressure or a BVM fault.

Many... low oil pressure, BVM valve faulty, torque converter fault or any of around 10 other electrical faults. Proper diags needed... the end

Looks like an X65 Cup fuel rail. You can buy them for around £220 + vat IIRC

I believe that is the auto box malfuntion light and its telling you to seek help

FLOL at the guy that rips open his shirt to reveal the Apple logo tattoo at the end. I imagine a few on here have those to

Poor poor guy, such a horrible situation to be in.

I'm pretty much sold on the S4 but am holding out until the Note3 is launched (hoping for August). Honestly though, how's the battery life on the One?

Winning!

I originally had these for track only wheels. Sold the Turrini's and fell for them so now the dailys... Not the best pic and the car's filthy but it gives you the general idea

Did a D7F to F7R conversion on a Mk1 Ph3 There's most likely going to be a bit of wiring yes but how much depends on the year of your shell. If its 97-98 then the imobillisers strated to get pretty intense around this time and it won't be simple. Mick

It only takes a little fluid in the servo to look like a lot and remember, the vac line will pull it thru in to the pipe also. Has anything happened recently like some muppet been allowed to service it who maybe pulled the resevoir out of the master cylinder?

If it were my personal car then yes, I'd just change the pulley and fit a new belt BUT I can do all the work and am prepared to take the risk/rebuild it if it goes wrong. If it were a paying customer asking though there'd be no way... new kits.

It won't automatically clear but the symptoms would dissappear if it was fixed (which its not if its still missing). Some recovery guys are great, others not. I remeber Daveski's Megane coming in from the AA with a report saying the gear position switch caused it to cut out... which a manual...

Door card off the offending door then put a volt meter into the multiplug for the window regulator. Then work the window... do you see a voltage register? If yes, replace regulator If no, replace UCH

350D owner here... have it mated to a Sigma DC and its still awesome. The only downside is the small review screen but I bet you'll find one cheaper than a 450D body.

They're saying the loom as they cannot undertake any wiring work. Take it somewhere that can

R107 is the termination code for the big connection that takes the dash loom thru to the engine bay... I'd urge you not to play in there! From what you've said then you really need your car looking at to see what the pedal positions are reporting vs engine speed and interpruted throttle angle...

There's normally a few issues with the Cups that can cause this: Brake pedal switch Wiring harness from pedal to ecu Poor connection at connection R107 Couple of things to check first. I'm assuming the vehicle starts okay but the throttle pedal is NON-RESPONSIVE to movement? If so turn the car...

Damn, plato got azz!

Spotted that already but for me, there's a clear winner: Good God, I'd dissapoint her in under 5minutes

Jeeus, why didn't I do the pit perv now?

I had a play with an actual S4 in my local Phones4U store on Wednesday and I'm sold on it over the HTC One now. Some minor tweeks to icons but on the whole what you have now on the S3 is what you'll get on the S4. I'm currently contract free with a Note2 and am kinda waiting/hoping that the...

Tough call - If i had to choose though it would be a 50/50 for me between the Whiteline ARB or Pure Motorsports top mount and strut brace kit.

I'm not West Mids but messy you say? Deal me in!