Search results

see if its coming up in the bios, go to the boot order, see if you can select it in there with your other harddrive or even by itself

is it any good that new method rich? is it the glue one? i was trained in pdr with the rods, never got chance to try the glue as it wasnt around then

i had a problem with mine with installing vista, but it was reading the disc of mine but wouldnt install, ended up reformatting as a slave and then allowing the vista disc to delete and make a new partition. but with yours if it aint coming up at all i really dunno what to say other than try it...

pretty much yup chips away is basically a bloke that comes round to bodge your car and get it looking satisfactory to your average joe. if you take pride in your car you wouldnt think about calling them, just take it to a bodyshop. as for the dent on the edge of a door, i doubt theyde try to...

have you set the jumper to master when it was on first? have you tried deleteing then remaking a new partition?

what work you having done? personally i wouldnt let them touch my car with paint, only getting dents out

it will be fine. just make sure you prep it VERY well and clean it very well too.

G3 is good, all i use tbh for cutting

ide possibly try find out how long theyve been on there for? if the paint has faded and weathered, even polishing it will be a pain in the arse and may not bring it back 100%

nvm, fixed it by installing ad-block plus in firefox

right, ive had this on for aslong as i can remember. Ive googled the company and apparantly its related to a something called Kontera. Tried ad aware scan, tried spybot search and destroy scan, tried CrapCleaner scan, tried Add/Remove programmes (nothing in there), no folders in Program...

you must have some terrible pressure washers :S and a none keyed surface, paint has nothing to stick to, a decent pressure washer would take it off

get the car on axle stands, drop your wheels off and get a pressure washer under there. the inner arch is plastic and smooth so any paint will be unable to stick, a good blast with a pressure washer will take it off.

you get wheels and i get a spanking new cup...... to drink out of :(

Username: Seb Password: sucksatcnc

his is a mk 2, but on some mk 1's they do have detatchable black backings, so the repeater hes got is for a mk 1, not mk 2 :P

;)

some mk 1's have detatchable lenses from the black bit, i know mine was. sounds like youve got the wrong repeaters. either send em back n buy right ones, or try break the lense off the plastic and then glue your lense to it

right, reading through the mobo manual just found that apparantly i have to explore the disc, go through folders and manually run autoupdate, this installs latest drivers via the internet. if i just autorun the .exe it does it via dos/floppy >.< updating now lol

phew, i dunno what happened, but i went downstairs to use the pc down there for 20 minutes, just came up to write out what it says , turned it on and its booted up now :S

just fucked up the bios on main pc. put in the motherboard disc, it reset my pc and came up with this a make intel ICH8 32 bit AHCI/RAID Driver Disc b " 64 bit " c Jmicron JMB36x 32 bit AHCI/RAID Driver d " 64bit " e JMICRON JMB36x 32 bit...

ahh kk thanks for clearing that up

Use Update using Aflash BIOS Update Procedure 1. ASUS Online Update (Download from ASUS WWW) for latest version BIOS and save it on a floppy disk. 2. Use the floppy disk as described in above to boot. 3. In A:\ DOS mode, please unzip AFLASH.EXE. 4. In MAIN MENU, please choose Update BIOS...

sweet cheers. another question (sorry lol) i have a asus P5B mother board. on the box its got various other numbers and that but on the actual asus site theres 14 or 15 different ones. do you think mine is just the very basic P5B motherboard...

yea i downloaded Motherboard Monitor to get my temps that i first posted. But tbh, since i built this system, i havnt touched a thing in bios, nothing has been installed for the motherboard, no drivers or anything, just plugged and played lol ill check that site now cheers

quick question. how do i check i have the latest bios for my motherboard? and also, when i went into bios the last 2 times, when i clicked Hardware Settings(?) it came up that it may take some time to read the cpu fan speed but ive waitied 5-10 minutes and nothing happens, ideas?

which bits?

where did you buy your cooler from mate? also you got a link to overclocking info, i looked on ocuk but theres so many threads. i just want a guide on how to overclock lol

dunno but thats overpriced, how about this? http://www.ebuyer.com/UK/product/128465/rb/0

ok i have an c2d e6600 @ 2.4 gig, 8800gts 320mb and 2 gig of ram. My CPU - temp on stock cooling is 33 degrees My Case - 38 degrees. first of all, do these seem about right? low? high? secondly, overclocking. im interested in doing it but im getting a few people saying ill blow my cpu up, ill...