Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
As long as it’s synthetic it will be fine, if memory serves its 3.1 litres but you can get away with 3L.
It’s easy to change just drop the old oil like doing the sump then refill from the plastic butterfly on the front of the box.
Have some pipe and a funnel handy makes the job a lot easier...
Trouble with 3D printing is its very time consuming.
The material/energy costs for one of those racks would be roughly £10-15 for example but soon as you factor in any labour money for keeping the printer going for 40 hours it becomes expensive.
If loius can do it for the cost of filament definatly go with that.
If you draw a blank I do have a printer but it would be more costly and time consuming as its only a basc fdm one.
Got a trafic van 1.9 diesel, I assume it’s a similar if not the same engine in most renaults
Recently when it’s cold if I brake at a junction it drops the revs to 0 and almost stalls.
Only happens when the brake pedal is pressed which is strange.
Any ideas?
More likely to need a new shock or spring depending on the mileage/age.
Take the wheel off and have a look will be the fastest way to diagnose the problem.