Search results

they won't do height.

can't for the life of me remember what they are called!! derby road/bankfield area, think possibly forge st? they are ok, nothing to rave about but set to what you want. think they charged £50? don't do corner weighting though.

only place i know of local that does geometry is in liverpool. they only do to your settings.

ttv, £250 delivered from northloopcup.

big thread on it already if you do search. just done mine, slightly more solid feel but not sure how much is psychological as did the rods and ends at the same time.

lamps go in from the back, black trim from the front.

hanging low, sort the rear hangers out and take it from there.

you could bore them out and bush them. shouldn't have much problem finding a decent used one.

and people ask why i don't want to go to 'the ring' classic small penis syndrome:sleeping:

don't use 600/800, just scotch pad it.

not a shortie but a good project...http://www.quattroforum.com/index.php?threads/lifes-ambition.11888/

nope, works fine, if anything less prone to chipping than a metal panel.

erm, why??

it's just a speed clip, either hold it by hand or with a pair of pliers.

you don't polish them before you clear coat, 1500/2000 then quick scotch pad.

the wife's sounded similar (hard to tell exactly from the video)

i looked into them when i put forged wheels on the bike...bloody expensive to say the least, hate to think how much a decent sized one would be!! doubt they would even be worth using on the front unless it's an out and out competition car and you're loaded:wink:

check the rad, bottom on the passengers side. seen loads go there.

mine cam with the holes in a bag and i used them:tongueclosed:

did you go to bodyshops though? chances are most of them will say that to get the work from you.

any half decent pdr guy will get that out no problem.

they can get a bit rusty and that 'sticks' them on.

looks like icv, cable was fine, tb was slightly sticky on first opening so went in the ultrasonic for half an hour but didn't have enough time to try another icv.

21mm nut in the hanger on the lower part then fill the gaps with mastic/screen sealer etc.

was gobsmacked at where it was, got right under window seals, behind lights etc. was on a car i got the leftover off.

awful stuff, makes a bloody mess absolutely everywhere!!!!

finished fitting bang and olufsen cams (can't remember the real name but that's what keeps popping into my head) new dephaser, light weight flywheel, clutch, epas conversion, pms shifter and glued the engine mounting back together:)

last time i saw one wired to 12v without being pulsed it started smoking after about 5 seconds;)

m12, can't remember the length, 80mm rings a bell but think that was a bit long, just what i had knocking around. will check for you tomorrow though, car still on the ramp.

i just used socket cap bolts put in from the rack side, need to tap the o/s one in a bit.